[PATCH v2] leds: leds-gpio: adopt pinctrl support
Linus Walleij
linus.walleij at linaro.org
Tue Sep 11 05:40:12 EST 2012
On Sat, Sep 1, 2012 at 10:16 AM, AnilKumar Ch <anilkumar at ti.com> wrote:
> Adopt pinctrl support to leds-gpio driver based on leds-gpio
> device pointer, pinctrl driver configure SoC pins to GPIO
> mode according to definitions provided in .dts file.
>
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
So looking back at this after Stephen posed a real good
question, when you say "configure SoC pins to GPIO
mode", does that mean anything else than to mux them into
GPIO mode?
In that case, have you considered augmenting
pinctrl-single.c to implement .gpio_request_enable()
.gpio_disable_free() and maybe also .gpio_set_direction()
in its struct pinmux_ops pinmux backend?
If not, why?
Currently it looks like this:
static int pcs_request_gpio(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset)
{
return -ENOTSUPP;
}
static struct pinmux_ops pcs_pinmux_ops = {
.get_functions_count = pcs_get_functions_count,
.get_function_name = pcs_get_function_name,
.get_function_groups = pcs_get_function_groups,
.enable = pcs_enable,
.disable = pcs_disable,
.gpio_request_enable = pcs_request_gpio,
};
Yours,
Linus Walleij
More information about the devicetree-discuss
mailing list