[PATCH Resend 1/2] ARM: dts: Use active low flag for gpio-keys on Origen

[Kukjin Kim]

Sachin Kamat wrote:
> 
> Commit: f447ed8b31d (gpio: samsung: add flags specifier to
> device-tree binding) adds a flag to represent active low state
> for gpio line. Since gpio-keys on Origen board are active low,
> using this flag to represent the same.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
> Reviewed-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/boot/dts/exynos4210-origen.dts |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
> b/arch/arm/boot/dts/exynos4210-origen.dts
> index 0c49caa..c37edf0 100644
> --- a/arch/arm/boot/dts/exynos4210-origen.dts
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -62,31 +62,31 @@
> 
>  		up {
>  			label = "Up";
> -			gpios = <&gpx2 0 0 0 2>;
> +			gpios = <&gpx2 0 0 0x10000 2>;
>  			linux,code = <103>;
>  		};
> 
>  		down {
>  			label = "Down";
> -			gpios = <&gpx2 1 0 0 2>;
> +			gpios = <&gpx2 1 0 0x10000 2>;
>  			linux,code = <108>;
>  		};
> 
>  		back {
>  			label = "Back";
> -			gpios = <&gpx1 7 0 0 2>;
> +			gpios = <&gpx1 7 0 0x10000 2>;
>  			linux,code = <158>;
>  		};
> 
>  		home {
>  			label = "Home";
> -			gpios = <&gpx1 6 0 0 2>;
> +			gpios = <&gpx1 6 0 0x10000 2>;
>  			linux,code = <102>;
>  		};
> 
>  		menu {
>  			label = "Menu";
> -			gpios = <&gpx1 5 0 0 2>;
> +			gpios = <&gpx1 5 0 0x10000 2>;
>  			linux,code = <139>;
>  		};
>  	};
> --
> 1.7.4.1

Applied, thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.