[PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy

ABRAHAM, KISHON VIJAY kishon at ti.com
Thu Sep 6 22:15:33 EST 2012


Hi,

On Mon, Aug 6, 2012 at 6:37 PM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
> All phy related programming like enabling/disabling the clocks, powering
> on/off the phy is taken care of by this driver. It is also used for OTG
> related functionality like srp.
>
> This also includes device tree support for usb2 phy driver and
> the documentation with device tree binding information is updated.
>
> Currently writing to control module register is taken care in this
> driver which will be removed once the control module driver is in place.
>
> Cc: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  .../devicetree/bindings/bus/omap-ocp2scp.txt       |    3 +
>  Documentation/devicetree/bindings/usb/omap-usb.txt |   17 ++
>  drivers/usb/phy/Kconfig                            |   10 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/omap-usb2.c                        |  271 ++++++++++++++++++++
>  include/linux/usb/omap_usb.h                       |   46 ++++
>  include/linux/usb/phy_companion.h                  |   34 +++
>  7 files changed, 382 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/omap-usb.txt
>  create mode 100644 drivers/usb/phy/omap-usb2.c
>  create mode 100644 include/linux/usb/omap_usb.h
>  create mode 100644 include/linux/usb/phy_companion.h
>
> diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> index d2fe064..bb0c7f4 100644
> --- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> @@ -8,3 +8,6 @@ properties:
>
>  Sub-nodes:
>  All the devices connected to ocp2scp are described using sub-node to ocp2scp
> +- usb2phy :
> +   The binding details of usb2phy can be found in:
> +   Documentation/devicetree/bindings/usb/omap-usb.txt

The above two lines should be added in omap-ocp2scp.txt (this file was
added as part of omap: add ocp2scp as a bus driver and is in
linux-next). However this file is still not in Felipe's xceiv branch.
So I'm not sure how I can get this patch merged in Felipe's tree
without conflict.

Thanks
Kishon


More information about the devicetree-discuss mailing list