[PATCH v5 3/4] regulator: anatop-regulator: convert to use syscon to access anatop register
Dong Aisheng
b29396 at freescale.com
Tue Sep 4 13:20:10 EST 2012
From: Dong Aisheng <dong.aisheng at linaro.org>
Using syscon to access anatop register.
Acked-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
Acked-by: Stephen Warren <swarren at wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng at linaro.org>
---
ChangeLog v4->v5:
* merge patch 3,4,5,6 to avoid break bisect.
ChangeLog v2->v3:
* update to use syscon_node_to_regmap and use of_get_parent to get anatop node.
ChangeLog v1-v2:
* update to use generic regmap api
---
arch/arm/boot/dts/imx6q.dtsi | 4 +-
arch/arm/mach-imx/Kconfig | 2 +-
arch/arm/mach-imx/mach-imx6q.c | 47 +++++++++++++---------------------
drivers/regulator/Kconfig | 2 +-
drivers/regulator/anatop-regulator.c | 30 ++++++++++++++-------
5 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index bea21bc..52ed4d1 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -378,8 +378,8 @@
interrupts = <0 87 0x04 0 88 0x04>;
};
- anatop at 020c8000 {
- compatible = "fsl,imx6q-anatop";
+ anatop: anatop at 020c8000 {
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index afd542a..7bba253 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -839,7 +839,7 @@ config SOC_IMX6Q
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
- select MFD_ANATOP
+ select MFD_SYSCON
select PINCTRL
select PINCTRL_IMX6Q
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 045b3f6..eaf56b4 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -24,8 +24,9 @@
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
+#include <linux/regmap.h>
#include <linux/micrel_phy.h>
-#include <linux/mfd/anatop.h>
+#include <linux/mfd/syscon.h>
#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
@@ -120,20 +121,7 @@ static void __init imx6q_sabrelite_init(void)
static void __init imx6q_usb_init(void)
{
- struct device_node *np;
- struct platform_device *pdev = NULL;
- struct anatop *adata = NULL;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
- if (np)
- pdev = of_find_device_by_node(np);
- if (pdev)
- adata = platform_get_drvdata(pdev);
- if (!adata) {
- if (np)
- of_node_put(np);
- return;
- }
+ struct regmap *anatop;
#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
@@ -141,20 +129,21 @@ static void __init imx6q_usb_init(void)
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
- /*
- * The external charger detector needs to be disabled,
- * or the signal at DP will be poor
- */
- anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B
- | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
- ~0);
- anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B |
- BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
- ~0);
-
- of_node_put(np);
+ anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ if (!IS_ERR(anatop)) {
+ /*
+ * The external charger detector needs to be disabled,
+ * or the signal at DP will be poor
+ */
+ regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B
+ | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+ regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B |
+ BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+ } else {
+ pr_warn("failed to find fsl,imx6q-anatop regmap\n");
+ }
}
static void __init imx6q_init_machine(void)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4e932cc..2ae1d97 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -112,7 +112,7 @@ config REGULATOR_DA9052
config REGULATOR_ANATOP
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
- depends on MFD_ANATOP
+ depends on MFD_SYSCON
help
Say y here to support Freescale i.MX on-chip ANATOP LDOs
regulators. It is recommended that this option be
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index ce0fe72..346e5f6 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -21,19 +21,20 @@
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mfd/syscon.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/mfd/anatop.h>
+#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
struct anatop_regulator {
const char *name;
u32 control_reg;
- struct anatop *mfd;
+ struct regmap *anatop;
int vol_bit_shift;
int vol_bit_width;
int min_bit_val;
@@ -43,7 +44,8 @@ struct anatop_regulator {
struct regulator_init_data *initdata;
};
-static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector)
+static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
+ unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
u32 val, mask;
@@ -56,12 +58,13 @@ static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector)
mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
anatop_reg->vol_bit_shift;
val <<= anatop_reg->vol_bit_shift;
- anatop_write_reg(anatop_reg->mfd, anatop_reg->control_reg, val, mask);
+ regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
+ mask, val);
return 0;
}
-static int anatop_get_voltage_sel(struct regulator_dev *reg)
+static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
u32 val, mask;
@@ -69,7 +72,7 @@ static int anatop_get_voltage_sel(struct regulator_dev *reg)
if (!anatop_reg->control_reg)
return -ENOTSUPP;
- val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg);
+ regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
anatop_reg->vol_bit_shift;
val = (val & mask) >> anatop_reg->vol_bit_shift;
@@ -78,8 +81,8 @@ static int anatop_get_voltage_sel(struct regulator_dev *reg)
}
static struct regulator_ops anatop_rops = {
- .set_voltage_sel = anatop_set_voltage_sel,
- .get_voltage_sel = anatop_get_voltage_sel,
+ .set_voltage_sel = anatop_regmap_set_voltage_sel,
+ .get_voltage_sel = anatop_regmap_get_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
@@ -88,11 +91,11 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ struct device_node *anatop_np;
struct regulator_desc *rdesc;
struct regulator_dev *rdev;
struct anatop_regulator *sreg;
struct regulator_init_data *initdata;
- struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
int ret = 0;
@@ -109,7 +112,14 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
rdesc->ops = &anatop_rops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->owner = THIS_MODULE;
- sreg->mfd = anatopmfd;
+
+ anatop_np = of_get_parent(np);
+ if (!anatop_np)
+ return -ENODEV;
+ sreg->anatop = syscon_node_to_regmap(anatop_np);
+ if (IS_ERR(sreg->anatop))
+ return PTR_ERR(sreg->anatop);
+
ret = of_property_read_u32(np, "anatop-reg-offset",
&sreg->control_reg);
if (ret) {
--
1.7.0.4
More information about the devicetree-discuss
mailing list