[PATCH v3 1/4] usb: phy: samsung: Add host phy support to samsung-phy driver
Vivek Gautam
gautam.vivek at samsung.com
Tue Oct 30 00:42:37 EST 2012
This patch adds host phy support to samsung-usbphy.c and
further adds support for samsung's exynos5250 usb-phy.
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
arch/arm/mach-exynos/setup-usb-phy.c | 2 +-
arch/arm/mach-s3c64xx/setup-usb-phy.c | 2 +-
arch/arm/plat-samsung/include/plat/usb-phy.h | 2 +-
drivers/usb/phy/Kconfig | 1 -
drivers/usb/phy/samsung-usbphy.c | 369 ++++++++++++++++++++++++--
include/linux/platform_data/samsung-usbphy.h | 8 +-
6 files changed, 353 insertions(+), 31 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 1c62d20..be6cd4f 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -222,7 +222,7 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL;
}
-void s5p_usb_phy_pmu_isolation(int on)
+void s5p_usb_phy_pmu_isolation(int on, int type)
{
if (on) {
writel(readl(S5P_USBDEVICE_PHY_CONTROL)
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index 3aee778..b7d1d95 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -13,7 +13,7 @@
#include <mach/map.h>
#include <mach/regs-sys.h>
-void s5p_usb_phy_pmu_isolation(int on)
+void s5p_usb_phy_pmu_isolation(int on, int type)
{
if (on) {
writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK,
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
index 165ffe7..7a4a959 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -18,6 +18,6 @@ enum s5p_usb_phy_type {
extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-extern void s5p_usb_phy_pmu_isolation(int on);
+extern void s5p_usb_phy_pmu_isolation(int on, int type);
#endif /* __PLAT_SAMSUNG_USB_PHY_H */
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 313685f..1ce5b32 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -35,7 +35,6 @@ config MV_U3D_PHY
config SAMSUNG_USBPHY
bool "Samsung USB PHY controller Driver"
- depends on USB_S3C_HSOTG
select USB_OTG_UTILS
help
Enable this to support Samsung USB phy controller for samsung
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 4efe89c..006f72e 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -57,6 +57,116 @@
#define S3C_RSTCON_HCLK (1 << 1)
#define S3C_RSTCON_PHY (1 << 0)
+/* EXYNOS5 */
+#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
+
+#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_MASK (0x3)
+#define HOST_CTRL0_REFCLKSEL(_x) ((_x) << 19)
+#define HOST_CTRL0_REFCLKSEL_XTAL \
+ HOST_CTRL0_REFCLKSEL(0x0)
+#define HOST_CTRL0_REFCLKSEL_EXTL \
+ HOST_CTRL0_REFCLKSEL(0x1)
+#define HOST_CTRL0_REFCLKSEL_CLKCORE \
+ HOST_CTRL0_REFCLKSEL(0x2)
+
+#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
+#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
+#define HOST_CTRL0_FSEL_CLKSEL_50M (0x7)
+#define HOST_CTRL0_FSEL_CLKSEL_24M (0x5)
+#define HOST_CTRL0_FSEL_CLKSEL_20M (0x4)
+#define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3)
+#define HOST_CTRL0_FSEL_CLKSEL_12M (0x2)
+#define HOST_CTRL0_FSEL_CLKSEL_10M (0x1)
+#define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0)
+
+#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
+#define HOST_CTRL0_RETENABLE (0x1 << 10)
+#define HOST_CTRL0_COMMONON_N (0x1 << 9)
+#define HOST_CTRL0_SIDDQ (0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
+#define HOST_CTRL0_UTMISWRST (0x1 << 2)
+#define HOST_CTRL0_LINKSWRST (0x1 << 1)
+#define HOST_CTRL0_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
+
+#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
+
+#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
+
+#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
+
+#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
+
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3)
+#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
+
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f)
+#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
+#define HSIC_CTRL_REFCLKDIV_12 \
+ HSIC_CTRL_REFCLKDIV(0x24)
+#define HSIC_CTRL_REFCLKDIV_15 \
+ HSIC_CTRL_REFCLKDIV(0x1C)
+#define HSIC_CTRL_REFCLKDIV_16 \
+ HSIC_CTRL_REFCLKDIV(0x1A)
+#define HSIC_CTRL_REFCLKDIV_19_2 \
+ HSIC_CTRL_REFCLKDIV(0x15)
+#define HSIC_CTRL_REFCLKDIV_20 \
+ HSIC_CTRL_REFCLKDIV(0x14)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
+
+#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
+#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
+#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
+
+#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
+#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
+#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
+#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS (0x38)
+
+#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
+#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
+#define OTG_SYS_PHY0_SWRST (0x1 << 12)
+
+#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
+#define OTG_SYS_REFCLKSEL(_x) ((_x) << 9)
+#define OTG_SYS_REFCLKSEL_XTAL \
+ OTG_SYS_REFCLKSEL(0x0)
+#define OTG_SYS_REFCLKSEL_EXTL \
+ OTG_SYS_REFCLKSEL(0x1)
+#define OTG_SYS_REFCLKSEL_CLKCORE \
+ OTG_SYS_REFCLKSEL(0x2)
+
+#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
+#define OTG_SYS_COMMON_ON (0x1 << 7)
+
+#define OTG_SYS_FSEL_MASK (0x7 << 4)
+#define OTG_SYS_FSEL(_x) ((_x) << 4)
+
+#define OTG_SYS_FORCESLEEP (0x1 << 3)
+#define OTG_SYS_OTGDISABLE (0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
+#define OTG_SYS_FORCESUSPEND (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_TUNE (0x40)
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
@@ -64,6 +174,7 @@
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
+ TYPE_EXYNOS5250,
};
/*
@@ -84,6 +195,7 @@ struct samsung_usbphy {
void __iomem *regs;
int ref_clk_freq;
int cpu_type;
+ atomic_t host_usage;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
@@ -96,30 +208,176 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
struct clk *ref_clk;
int refclk_freq = 0;
- ref_clk = clk_get(sphy->dev, "xusbxti");
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ ref_clk = clk_get(sphy->dev, "ext_xtal");
+ else
+ ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
- switch (clk_get_rate(ref_clk)) {
- case 12 * MHZ:
- refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
- break;
+ if (sphy->cpu_type == TYPE_EXYNOS5250) {
+ /* set clock frequency for PLL */
+ switch (clk_get_rate(ref_clk)) {
+ case 96 * 100000:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_12M;
+ break;
+ case 192 * 100000:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_20M;
+ break;
+ case 50 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_50M;
+ break;
+ case 24 * MHZ:
+ default:
+ /* default reference clock */
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_24M;
+ break;
+ }
+ } else {
+ switch (clk_get_rate(ref_clk)) {
+ case 12 * MHZ:
+ refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
+ break;
+ }
}
clk_put(ref_clk);
return refclk_freq;
}
+static int exynos5_phyhost_is_on(void *regs)
+{
+ return (readl(regs + EXYNOS5_PHY_HOST_CTRL0) &
+ HOST_CTRL0_SIDDQ) ? 0 : 1;
+}
+
+static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyclk = sphy->ref_clk_freq;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+ u32 ehcictrl;
+ u32 ohcictrl;
+
+ atomic_inc(&sphy->host_usage);
+
+ if (exynos5_phyhost_is_on(regs)) {
+ dev_info(sphy->dev, "Already power on PHY\n");
+ return;
+ }
+
+ /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
+ if (sphy->plat && sphy->plat->phy_cfg_sel) {
+ if (sphy->plat->type)
+ sphy->plat->phy_cfg_sel(sphy->dev, sphy->plat->type);
+ else
+ sphy->plat->phy_cfg_sel(sphy->dev, TYPE_OTG);
+ }
+
+ /* Host configuration */
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* phy reference clock configuration */
+ phyhost &= ~HOST_CTRL0_FSEL_MASK;
+ phyhost |= HOST_CTRL0_FSEL(phyclk);
+
+ /* host phy reset */
+ phyhost &= ~(HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ /* Enable normal mode of operation */
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+
+ /* Link reset */
+ phyhost |= (HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST |
+ /* COMMON Block configuration during suspend */
+ HOST_CTRL0_COMMONON_N);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+ udelay(10);
+ phyhost &= ~(HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* OTG configuration */
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* phy reference clock configuration */
+ phyotg &= ~OTG_SYS_FSEL_MASK;
+ phyotg |= OTG_SYS_FSEL(phyclk);
+
+ /* Enable normal mode of operation */
+ phyotg &= ~(OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP |
+ OTG_SYS_REFCLKSEL_MASK |
+ /* COMMON Block configuration during suspend */
+ OTG_SYS_COMMON_ON);
+
+ /* OTG phy & link reset */
+ phyotg |= (OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET |
+ OTG_SYS_OTGDISABLE |
+ /* Set phy refclk */
+ OTG_SYS_REFCLKSEL_CLKCORE);
+
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+ udelay(10);
+ phyotg &= ~(OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* HSIC phy configuration */
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_PHYSWRST);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+ udelay(10);
+ phyhsic &= ~HSIC_CTRL_PHYSWRST;
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ udelay(80);
+
+ /* enable EHCI DMA burst */
+ ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
+ ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
+ HOST_EHCICTRL_ENAINCR4 |
+ HOST_EHCICTRL_ENAINCR8 |
+ HOST_EHCICTRL_ENAINCR16);
+ writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
+
+ /* set ohci_suspend_on_n */
+ ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
+ ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
+ writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
+}
+
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -155,6 +413,41 @@ static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
writel(rstcon, regs + S3C_RSTCON);
}
+static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+
+ if (atomic_dec_return(&sphy->host_usage) > 0) {
+ dev_info(sphy->dev, "still being used\n");
+ return;
+ }
+
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_FORCESUSPEND);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+ phyhost |= (HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP |
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+ phyotg |= (OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+}
+
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -194,11 +487,18 @@ static int samsung_usbphy_init(struct usb_phy *phy)
}
/* Disable phy isolation */
- if (sphy->plat && sphy->plat->pmu_isolation)
- sphy->plat->pmu_isolation(false);
+ if (sphy->plat && sphy->plat->pmu_isolation) {
+ if (sphy->plat->type)
+ sphy->plat->pmu_isolation(false, sphy->plat->type);
+ else
+ sphy->plat->pmu_isolation(false, TYPE_OTG);
+ }
/* Initialize usb phy registers */
- samsung_usbphy_enable(sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_enable(sphy);
+ else
+ samsung_usbphy_enable(sphy);
/* Disable the phy clock */
clk_disable_unprepare(sphy->clk);
@@ -220,11 +520,18 @@ static void samsung_usbphy_shutdown(struct usb_phy *phy)
}
/* De-initialize usb phy registers */
- samsung_usbphy_disable(sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_disable(sphy);
+ else
+ samsung_usbphy_disable(sphy);
/* Enable phy isolation */
- if (sphy->plat && sphy->plat->pmu_isolation)
- sphy->plat->pmu_isolation(true);
+ if (sphy->plat && sphy->plat->pmu_isolation) {
+ if (sphy->plat->type)
+ sphy->plat->pmu_isolation(true, sphy->plat->type);
+ else
+ sphy->plat->pmu_isolation(true, TYPE_OTG);
+ }
clk_disable_unprepare(sphy->clk);
}
@@ -277,16 +584,9 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
if (!sphy)
return -ENOMEM;
- clk = devm_clk_get(dev, "otg");
- if (IS_ERR(clk)) {
- dev_err(dev, "Failed to get otg clock\n");
- return PTR_ERR(clk);
- }
-
sphy->dev = &pdev->dev;
sphy->plat = pdata;
sphy->regs = phy_base;
- sphy->clk = clk;
sphy->phy.dev = sphy->dev;
sphy->phy.label = "samsung-usbphy";
sphy->phy.init = samsung_usbphy_init;
@@ -296,6 +596,17 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ clk = devm_clk_get(dev, "usbhost");
+ else
+ clk = devm_clk_get(dev, "otg");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Failed to get otg clock\n");
+ return PTR_ERR(clk);
+ }
+
+ sphy->clk = clk;
+
ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
return ret;
}
@@ -317,6 +628,9 @@ static const struct of_device_id samsung_usbphy_dt_match[] = {
}, {
.compatible = "samsung,exynos4210-usbphy",
.data = (void *)TYPE_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos5250-usbphy",
+ .data = (void *)TYPE_EXYNOS5250,
},
{},
};
@@ -332,6 +646,9 @@ static struct platform_device_id samsung_usbphy_driver_ids[] = {
}, {
.name = "exynos4210-usbphy",
.driver_data = TYPE_EXYNOS4210,
+ }, {
+ .name = "exynos5250-usbphy",
+ .driver_data = TYPE_EXYNOS5250,
},
{},
};
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
index 1bd24cb..364a38a 100644
--- a/include/linux/platform_data/samsung-usbphy.h
+++ b/include/linux/platform_data/samsung-usbphy.h
@@ -18,8 +18,14 @@
* samsung_usbphy_data - Platform data for USB PHY driver.
* @pmu_isolation: Function to control usb phy isolation in PMU.
*/
+enum phy_type {
+ TYPE_OTG,
+ TYPE_HOST,
+};
+
struct samsung_usbphy_data {
- void (*pmu_isolation)(int on);
+ void (*pmu_isolation)(int on, int phy_type);
+ int type;
};
extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
--
1.7.6.5
More information about the devicetree-discuss
mailing list