[RFC PATCH v3 08/16] ARM: dts: add AM33XX EDMA support

[Sekhar Nori]

On 10/18/2012 6:56 PM, Matt Porter wrote:
> Adds AM33XX EDMA support to the am33xx.dtsi as documented in
> Documentation/devicetree/bindings/dma/ti-edma.txt
> 
> Signed-off-by: Matt Porter <mporter at ti.com>
> ---
>  arch/arm/boot/dts/am33xx.dtsi |   31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index bb31bff..ab9c78f 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -62,6 +62,37 @@
>  			reg = <0x48200000 0x1000>;
>  		};
>  
> +		edma: edma at 49000000 {
> +			compatible = "ti,edma3";
> +			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> +			reg =	<0x49000000 0x10000>,
> +				<0x44e10f90 0x10>;
> +			interrupt-parent = <&intc>;
> +			interrupts = <12 13 14>;
> +			#dma-cells = <1>;
> +			dma-channels = <64>;
> +			ti,edma-regions = <4>;
> +			ti,edma-slots = <256>;
> +			ti,edma-reserved-channels = <0  2
> +						     14 2
> +						     26 6
> +						     48 4
> +						     56 8>;
> +			ti,edma-reserved-slots = <0  2
> +						  14 2
> +						  26 6
> +						  48 4
> +						  56 8
> +						  64 127>;

No need to reserve any channels or slots on AM335x, I think. This is
used on DaVinci devices to share channels with DSP. I am not sure the
cortex-M3 or PRU on the AM335x need to (or even can) have EDMA access.

Thanks,
Sekhar