[PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes

Jon Hunter jon-hunter at ti.com
Thu Oct 25 10:00:37 EST 2012


On 10/24/2012 01:17 PM, Hiremath, Vaibhav wrote:
> On Wed, Oct 17, 2012 at 23:31:09, Hunter, Jon wrote:
>> Add the 12 GP timers nodes present in OMAP2.
>> Add the 12 GP timers nodes present in OMAP3.
>> Add the 11 GP timers nodes present in OMAP4.
>> Add the 7 GP timers nodes present in AM33xx.
>>
>> Add documentation for timer properties specific to OMAP.
>>
>> Please note that for OMAP2/3 devices, there is only one interrupt controller
>> for the ARM CPU (which has the label "intc") and so globally define this as the
>> interrupt parent to save duplicating the interrupt parent for all device nodes.
>>
>> Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified
>> Vaibhav's original nodes adding information on which timers support a PWM
>> output.
>>
>> Cc: Benoit Cousson <b-cousson at ti.com>
>> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
>> ---
>>  .../devicetree/bindings/arm/omap/timer.txt         |   29 ++++++
>>  arch/arm/boot/dts/am33xx.dtsi                      |   61 +++++++++++++
>>  arch/arm/boot/dts/omap2.dtsi                       |   86 ++++++++++++++++++
>>  arch/arm/boot/dts/omap2420.dtsi                    |    8 ++
>>  arch/arm/boot/dts/omap2430.dtsi                    |    8 ++
>>  arch/arm/boot/dts/omap3.dtsi                       |   96 ++++++++++++++++++++
>>  arch/arm/boot/dts/omap4.dtsi                       |   86 ++++++++++++++++++
>>  7 files changed, 374 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/arm/omap/timer.txt
>>
> 
> Although I have not tested this version of patch series at my end, but 
> whole patch-series Looks ok to me.
> 
> Acked-By: Vaibhav Hiremath <hvaibhav at ti.com>

Thanks. I made a couple cosmetic changes in V4 apart from the
"interrupt-parent" addition which we are now dropping. Care to ACK
patches 2-5 of V4?

Thanks
Jon


More information about the devicetree-discuss mailing list