[RFC PATCH v3 00/16] DMA Engine support for AM33XX
Matt Porter
mporter at ti.com
Fri Oct 19 00:26:39 EST 2012
Changes since v2:
- Rebased on 3.7-rc1
- Fixed bug in DT/pdata parsing first found by Gururaja
that turned out to be masked by some toolchains
- Dropped unused mach-omap2/devices.c hsmmc patch
- Added AM33XX crossbar DMA event mux support
- Added am335x-evm support
Changes since v1:
- Rebased on top of mainline from 12250d8
- Dropped the feature removal schedule patch
- Implemented dma_request_slave_channel_compat() and
converted the mmc and spi drivers to use it
- Dropped unneeded #address-cells and #size-cells from
EDMA DT support
- Moved private EDMA header to linux/platform_data/ and
removed some unneeded definitions
- Fixed parsing of optional properties
TODO:
- Add dmaengine support for per-channel caps so the
hack to set the maximum segments can be replaced with
a query to the dmaengine driver
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API implementation (much like the situation with OMAP
DMA) found on the DaVinci family of SoCs.
The series applies on top of 3.7-rc1 and the following patches:
- GPMC fails to reserve memory fix:
http://www.spinics.net/lists/linux-omap/msg79675.html
- TPS65910 regulator fix:
https://patchwork.kernel.org/patch/1593651/
- dmaengine DT support from Vinod's dmaengine_dt branch in
git://git.infradead.org/users/vkoul/slave-dma.git since
027478851791df751176398be02a3b1c5f6aa824
The approach taken is similar to how OMAP DMA is being converted to
DMA Engine support. With the functional EDMA private API already
existing in mach-davinci/dma.c, we first move that to an ARM common
area so it can be shared. Adding DT and runtime PM support to the
private EDMA API implementation allows it to run on AM33xx. AM33xx
*only* boots using DT so we leverage Jon's generic DT DMA helpers to
register EDMA DMAC with the of_dma framework and then add support
for calling the dma_request_slave_channel() API to both the mmc
and spi drivers.
With this series both BeagleBone and the AM335x EVM have working
MMC and SPI support.
This is tested on BeagleBone with a SPI framebuffer driver and MMC
rootfs. A trivial gpio DMA event misc driver was used to test the
crossbar DMA event support. It is also tested on the AM335x EVM
with the onboard SPI flash and MMC rootfs. The branch at
https://github.com/ohporter/linux/tree/edma-dmaengine-v3 has the
complete series, dependencies, and some test drivers/defconfigs.
Regression testing was done on AM180x-EVM (which also makes use
of the EDMA dmaengine driver and the EDMA private API) using SD,
SPI flash, and the onboard audio supported by the ASoC Davinci
driver.
After this series, the plan is to convert the last in-tree user
of the private EDMA API (davinci-pcm/mcasp) and then eliminate
the private EDMA API by folding its functionality into
drivers/dma/edma.c.
Matt Porter (16):
dmaengine: edma: fix slave config dependency on direction
ARM: davinci: move private EDMA API to arm/common
ARM: edma: remove unused transfer controller handlers
ARM: edma: add DT and runtime PM support for AM33XX
ARM: edma: add AM33XX crossbar event support
dmaengine: edma: enable build for AM33XX
dmaengine: edma: Add TI EDMA device tree binding
ARM: dts: add AM33XX EDMA support
dmaengine: add dma_request_slave_channel_compat()
mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
mmc: omap_hsmmc: limit max_segs with the EDMA DMAC
mmc: omap_hsmmc: add generic DMA request support to the DT binding
ARM: dts: add AM33XX MMC support
spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
spi: omap2-mcspi: add generic DMA request support to the DT binding
ARM: dts: add AM33XX SPI support
Documentation/devicetree/bindings/dma/ti-edma.txt | 51 +
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +-
Documentation/devicetree/bindings/spi/omap-spi.txt | 27 +-
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/am335x-bone.dts | 23 +
arch/arm/boot/dts/am335x-evm.dts | 15 +
arch/arm/boot/dts/am33xx.dtsi | 101 ++
arch/arm/common/Kconfig | 3 +
arch/arm/common/Makefile | 1 +
arch/arm/common/edma.c | 1841 ++++++++++++++++++++
arch/arm/mach-davinci/Makefile | 2 +-
arch/arm/mach-davinci/board-da830-evm.c | 4 +-
arch/arm/mach-davinci/board-da850-evm.c | 8 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 4 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 8 +-
arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +-
arch/arm/mach-davinci/davinci.h | 2 +-
arch/arm/mach-davinci/devices-da8xx.c | 8 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 6 +-
arch/arm/mach-davinci/devices.c | 7 +-
arch/arm/mach-davinci/dm355.c | 6 +-
arch/arm/mach-davinci/dm365.c | 6 +-
arch/arm/mach-davinci/dm644x.c | 6 +-
arch/arm/mach-davinci/dm646x.c | 6 +-
arch/arm/mach-davinci/dma.c | 1588 -----------------
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/include/mach/edma.h | 267 ---
arch/arm/plat-omap/Kconfig | 1 +
drivers/dma/Kconfig | 2 +-
drivers/dma/edma.c | 57 +-
drivers/mmc/host/davinci_mmc.c | 1 +
drivers/mmc/host/omap_hsmmc.c | 20 +-
drivers/spi/spi-omap2-mcspi.c | 65 +-
include/linux/dmaengine.h | 10 +
include/linux/mfd/davinci_voicecodec.h | 3 +-
include/linux/platform_data/edma.h | 199 +++
include/linux/platform_data/spi-davinci.h | 2 +-
sound/soc/davinci/davinci-evm.c | 1 +
sound/soc/davinci/davinci-pcm.c | 1 +
sound/soc/davinci/davinci-pcm.h | 2 +-
sound/soc/davinci/davinci-sffsdr.c | 6 +-
41 files changed, 2436 insertions(+), 1954 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
create mode 100644 arch/arm/common/edma.c
delete mode 100644 arch/arm/mach-davinci/dma.c
delete mode 100644 arch/arm/mach-davinci/include/mach/edma.h
create mode 100644 include/linux/platform_data/edma.h
--
1.7.9.5
More information about the devicetree-discuss
mailing list