[PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding

Jason Cooper jason at lakedaemon.net
Thu Oct 18 02:18:44 EST 2012


On Wed, Sep 26, 2012 at 04:49:41PM -0700, Olof Johansson wrote:
> On Mon, Sep 24, 2012 at 09:13:53AM +0200, Andrew Lunn wrote:
> > > > +Required properties:
> > > > +- compatible: must be "marvell,orion-ehci"
> > > > +- reg: physical base address of the controller and length of memory mapped
> > > > +  region.
> > > > +- interrupts: The EHCI interrupt
> > > > +- phy-version: Can be one of:
> > > > +  "NA" - Don't touch the phy, something else has already configured it.
> > > > +  "orion5x" - PHY setup as specified by the Orion5x Errata
> > > > +
> > > > +Example:
> > > > +
> > > > +       ehci at 50000 {
> > > > +               compatible = "marvell,orion-ehci";
> > > > +               reg = <0x50000 0x1000>;
> > > > +               interrupts = <19>;
> > > > +               phy-version = "NA";
> > > > +       };
> > > 
> > > This isn't an appropriate binding for phy. I know, it maps straight
> > > over from the platform data, but it doesn't focus on what the actual
> > > hardware is.
> > > 
> > > A couple of options. What probably makes most sense depending on how
> > > other phy bindings are moving ahead is to add a phy node under the
> > > ehci controller for the "orion5x" case, and have an appropriate
> > > compatible value there. No node means the same as "NA" in the above
> > > binding. Alternatively, have a phy phandle that points to the phy
> > > device if it sits on an i2c bus, etc.
> > 
> > I Olaf
> > 
> > Could i suggest a third option:
> > 
> > I just drop USB phy configuration all together.  Only mach-orion5x
> > needs this and nobody has shown any interest in moving mach-orion5x to
> > DT. So i would just hard code it to "NA".
> > 
> > If anybody does show interest in DT for orion5x, we can add a phy node
> > under ehci as a pure extension which does not affect backward
> > compatibility.
> 
> Yeah, that works too.

Andrew,

Did I miss the update of this series/patch?

thx,

Jason.


More information about the devicetree-discuss mailing list