[PATCH v3 1/6] dts: exynos: add device tree support for exynos5 hdmi

[Kukjin Kim]

Rahul Sharma wrote:
> 
> This patch adds support for device tree based discovery for exynos5
> hdmi. Hdmi node is also renamed with "exynos5-hdmi".
> 
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
> ---
>  .../devicetree/bindings/drm/exynos/hdmi.txt        |   22
> ++++++++++++++++++++
>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |    4 +++
>  arch/arm/boot/dts/exynos5250.dtsi                  |    6 +++++
>  arch/arm/mach-exynos/include/mach/map.h            |    1 +
>  arch/arm/mach-exynos/mach-exynos5-dt.c             |    2 +
>  5 files changed, 35 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmi.txt
> 

[...]

> +	hdmi {
> +		compatible = "samsung,exynos5-hdmi";
> +		reg = <0x14530000 0x100000>;
> +		interrupts = <0 95 0>;
> +		hpd-gpio = <&gpx3 7 0xf 1 3>;
> +	};
> \ No newline at end of file

What's this?

[...]

> +	hdmi at 14530000 {

+	hdmi {

> +		hpd-gpio = <&gpx3 7 0xf 1 3>;
> +	};
>  };
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index f69e389..ec7ea2d 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -492,4 +492,10 @@
>  			#gpio-cells = <4>;
>  		};
>  	};
> +
> +	hdmi at 14530000 {

Ditto.

[...]

> +#define EXYNOS5_PA_HDMI		0x14530000
> 

I think, we don't need this because see below.

[...]

> +	OF_DEV_AUXDATA("samsung,exynos5-hdmi", EXYNOS5_PA_HDMI,
> +				"exynos5-hdmi", NULL),

+	OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000, "exynos5-hdmi",
NULL),

I think, if the address as defined above is used only here, let's just the
value because nobody don't know it is the address.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.