[PATCH 03/15] pinctrl: samsung: Assing pin numbers dynamically
Tomasz Figa
t.figa at samsung.com
Thu Oct 11 19:11:09 EST 2012
This patch modifies the pinctrl-samsung driver to assign numbers to pins
dynamically instead of static enumerations.
Thanks to this change the amount of code requried to support a SoC can
be greatly reduced and the code made more readable.
Signed-off-by: Tomasz Figa <t.figa at samsung.com>
---
drivers/pinctrl/pinctrl-exynos.c | 83 +++++++++++++++++----------------------
drivers/pinctrl/pinctrl-exynos.h | 11 ++----
drivers/pinctrl/pinctrl-samsung.c | 22 ++++++++++-
3 files changed, 62 insertions(+), 54 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 21362f4..0ea2164 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -484,51 +484,51 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
- EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
- EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
- EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
- EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
- EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
- EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
- EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
- EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
- EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
- EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
- EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
- EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
- EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
- EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
- EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
- EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"),
+ EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"),
+ EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"),
+ EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"),
+ EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"),
+ EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
- EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
- EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
- EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
- EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
- EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
- EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
- EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
- EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
- EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
- EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
- EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
- EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
- EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
- EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
- EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
- EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
- EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
- EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
- EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
- EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"),
+ EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"),
+ EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"),
+ EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"),
+ EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"),
+ EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"),
+ EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"),
+ EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
+ EXYNOS_PIN_BANK_EINTN(8, 0xC00, "gpx0"),
+ EXYNOS_PIN_BANK_EINTN(8, 0xC20, "gpx1"),
+ EXYNOS_PIN_BANK_EINTN(8, 0xC40, "gpx2"),
+ EXYNOS_PIN_BANK_EINTN(8, 0xC60, "gpx3"),
};
/* pin banks of exynos4210 pin-controller 2 */
static struct samsung_pin_bank exynos4210_pin_banks2[] = {
- EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
+ EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/*
@@ -540,9 +540,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
- .base = EXYNOS4210_GPIO_A0_START,
- .nr_pins = EXYNOS4210_GPIOA_NR_PINS,
- .nr_gint = EXYNOS4210_GPIOA_NR_GINT,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
@@ -553,9 +550,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
- .base = EXYNOS4210_GPIOA_NR_PINS,
- .nr_pins = EXYNOS4210_GPIOB_NR_PINS,
- .nr_gint = EXYNOS4210_GPIOB_NR_GINT,
.nr_wint = 32,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
@@ -571,9 +565,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
- .base = EXYNOS4210_GPIOA_NR_PINS +
- EXYNOS4210_GPIOB_NR_PINS,
- .nr_pins = EXYNOS4210_GPIOC_NR_PINS,
.label = "exynos4210-gpio-ctrl2",
},
};
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
index 31d0a06..1788467 100644
--- a/drivers/pinctrl/pinctrl-exynos.h
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -165,11 +165,10 @@ enum exynos4210_gpio_xc_start {
#define EXYNOS_EINT_MAX_PER_BANK 8
#define EXYNOS_EINT_NR_WKUP_EINT
-#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \
+#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \
{ \
.pctl_offset = reg, \
- .pin_base = (__gpio##_START), \
- .nr_pins = (__gpio##_NR), \
+ .nr_pins = pins, \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
@@ -179,18 +178,16 @@ enum exynos4210_gpio_xc_start {
.name = id \
}
-#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \
+#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \
{ \
.pctl_offset = reg, \
- .pin_base = (__gpio##_START), \
- .nr_pins = (__gpio##_NR), \
+ .nr_pins = pins, \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
.conpdn_width = 2, \
.pudpdn_width = 2, \
.eint_type = EINT_TYPE_GPIO, \
- .irq_base = (__gpio##_IRQ), \
.name = id \
}
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index aa42d54..f219bb6 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -46,6 +46,8 @@ struct pin_config {
{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
};
+static unsigned int pin_base = 0;
+
/* check if the selector is a valid pin group selector */
static int samsung_get_group_count(struct pinctrl_dev *pctldev)
{
@@ -792,6 +794,9 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
int id;
const struct of_device_id *match;
const struct device_node *node = pdev->dev.of_node;
+ struct samsung_pin_ctrl *ctrl;
+ struct samsung_pin_bank *bank;
+ int i;
id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
if (id < 0) {
@@ -799,7 +804,22 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
return NULL;
}
match = of_match_node(samsung_pinctrl_dt_match, node);
- return (struct samsung_pin_ctrl *)match->data + id;
+ ctrl = (struct samsung_pin_ctrl *)match->data + id;
+
+ bank = ctrl->pin_banks;
+ for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+ bank->pin_base = ctrl->nr_pins;
+ ctrl->nr_pins += bank->nr_pins;
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ bank->irq_base = ctrl->nr_gint;
+ ctrl->nr_gint += bank->nr_pins;
+ }
+ }
+
+ ctrl->base = pin_base;
+ pin_base += ctrl->nr_pins;
+
+ return ctrl;
}
static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
--
1.7.12
More information about the devicetree-discuss
mailing list