[PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode

[Matt Porter]

On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote:
> With recent changes in omap gpmc driver code, in case of DT
> boot mode, where bootloader does not configure gpmc cs space
> will result into kernel BUG() inside gpmc_mem_init() function,
> as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and
> gpmc_config7[0].baseaddress is set to '0' on reset.
> 
> This use-case is applicable for any board/EVM which doesn't have
> any peripheral connected to gpmc cs0, for example BeagleXM and
> BeagleBone, so DT boot mode fails.
> 
> This patch adds of_have_populated_dt() check before creating
> device, so that for DT boot mode, gpmc probe will not be called
> which is expected behavior, as gpmc is not supported yet from DT.
> 
> Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
> Cc: Afzal Mohammed <afzal at ti.com>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc Paul Walmsley <paul at pwsan.com>
> ---
> This should go in for rc1, as this breaks AM33xx boot.

Fixes BeagleBone on mainline.

Tested-by: Matt Porter <mporter at ti.com>

-Matt