[PATCH 1/6] ARM: bcm476x: Add infrastructure
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Tue Oct 9 00:13:56 EST 2012
On 00:54 Mon 08 Oct , Domenico Andreoli wrote:
> On Sun, Oct 07, 2012 at 09:57:59PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 03:53 Sun 07 Oct , Domenico Andreoli wrote:
> > > From: Domenico Andreoli <domenico.andreoli at linux.com>
> > >
> > > BCM476x's minimal infrastructure, Kernel's great reuse.
> > >
> > > Look mom, no include/mach directory!
> > >
> > > Signed-off-by: Domenico Andreoli <domenico.andreoli at linux.com>
> > > ---
> > > Documentation/devicetree/bindings/arm/bcm476x.txt | 8 +
> > > MAINTAINERS | 9 +
> > > arch/arm/Kconfig | 2 +
> > > arch/arm/Makefile | 1 +
> > > arch/arm/boot/dts/bcm476x-catalina.dts | 11 +
> > > arch/arm/boot/dts/bcm476x.dtsi | 31 ++
> > > arch/arm/configs/bcm476x_defconfig | 352 ++++++++++++++++++++++
> > > arch/arm/include/debug/bcm476x-uncompress.h | 53 +++
> > > arch/arm/include/debug/bcm476x.S | 35 ++
> > > arch/arm/mach-bcm476x/Kconfig | 17 +
> > > arch/arm/mach-bcm476x/Makefile | 1 +
> > > arch/arm/mach-bcm476x/Makefile.boot | 5 +
> > > arch/arm/mach-bcm476x/bcm476x.c | 83 +++++
> > > 13 files changed, 608 insertions(+)
> > >
> > > Index: b/arch/arm/boot/dts/bcm476x.dtsi
> > > ===================================================================
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/bcm476x.dtsi
> > > @@ -0,0 +1,31 @@
> > > +/include/ "skeleton.dtsi"
> > > +
> > > +/ {
> > > + compatible = "brcm,bcm476x";
> > > + model = "Broadcom BCM476x";
> > > +
> > > + chosen {
> > > + bootargs = "earlyprintk";
> > > + };
> > > +
> > > + amba {
> > > + compatible = "arm,amba-bus";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + vic0: interrupt-controller at 80000 {
> > > + compatible = "brcm,bcm476x-pl192", "arm,pl192-vic", "arm,primecell";
> > why brcm specific compatbile?
>
> Nothing breaks if I drop it. I think it's a future-proof clause, especially
> if you consider that the devicetree could be not easy to upgrade and you
> may need a way to differentiate the bcm476x's implementation from the
> common one. I'm not sure it's an actual requirement with use cases.
on amba we use periph id for differeniate IP implementation
>
> > > + reg = <0x80000 0x1000>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <1>;
> > > + };
> > > +
> > > + vic1: interrupt-controller at 81000 {
> > > + compatible = "brcm,bcm476x-pl192", "arm,pl192-vic", "arm,primecell";
> > > + reg = <0x81000 0x1000>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <1>;
> > > + };
> > > + };
> > > +};
> > > Index: b/arch/arm/include/debug/bcm476x.S
> > > ===================================================================
> > > --- /dev/null
> > > +++ b/arch/arm/include/debug/bcm476x.S
> > > @@ -0,0 +1,35 @@
> > > +/*
> > > + * Broadcom BCM476x SoCs DEBUG_LL support
> > > + *
> > > + * Copyright (C) 2012 Domenico Andreoli <domenico.andreoli at linux.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License as published by
> > > + * the Free Software Foundation; either version 2 of the License, or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#if defined(CONFIG_DEBUG_BCM476X_UART0)
> > > +# define BCM476X_DEBUG_PHYS 0x000c0000
> > > +# define BCM476X_DEBUG_VIRT 0xd00c0000
> > > +#elif defined(CONFIG_DEBUG_BCM476X_UART1)
> > > +# define BCM476X_DEBUG_PHYS 0x000c1000
> > > +# define BCM476X_DEBUG_VIRT 0xd00c1000
> > > +#elif defined(CONFIG_DEBUG_BCM476X_UART2)
> > > +# define BCM476X_DEBUG_PHYS 0x000b2000
> > > +# define BCM476X_DEBUG_VIRT 0xd00b2000
> > > +#else
> > > +# error Unknown BCM476x debug port
> > > +#endif
> >
> > can't you detect it?
>
> If I can assume that the boot loader will configure and enable only the
> console port, I could use the first one in such state.
>
> Where could I place such detection, in the maco addruart itself?
>
> > > +
> > > + .macro addruart, rp, rv, tmp
> > > + ldr \rp, =BCM476X_DEBUG_PHYS
> > > + ldr \rv, =BCM476X_DEBUG_VIRT
> > > + .endm
> > > +
> > > +#include <asm/hardware/debug-pl01x.S>
> > > Index: b/arch/arm/include/debug/bcm476x-uncompress.h
> > > ===================================================================
> > > --- /dev/null
> > > +++ b/arch/arm/include/debug/bcm476x-uncompress.h
> > > @@ -0,0 +1,53 @@
> > > +/*
> > > + * Broadcom BCM476x SoCs decompressor output
> > > + *
> > > + * Copyright (C) 2012 Domenico Andreoli <domenico.andreoli at linux.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License as published by
> > > + * the Free Software Foundation; either version 2 of the License, or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#include <linux/io.h>
> > > +#include <linux/amba/serial.h>
> > > +
> > > +#if defined(CONFIG_DEBUG_BCM476X_UART0)
> > > +# define BCM476X_DEBUG_PHYS 0x000c0000
> > > +#elif defined(CONFIG_DEBUG_BCM476X_UART1)
> > > +# define BCM476X_DEBUG_PHYS 0x000c1000
> > > +#elif defined(CONFIG_DEBUG_BCM476X_UART2)
> > > +# define BCM476X_DEBUG_PHYS 0x000b2000
> > > +#else
> > > +# error Unknown BCM476x debug port
> > ditto here by using the first one enable by the bootloader
>
> Are you saying that the detection should happen always or only in this
> last else branch, which actually should be impossible?
if your bootloader do not enable a uart your kernel may not boot
>
> > > +#endif
> > > +
> > > +#define BCM476X_UART_DR IOMEM(BCM476X_DEBUG_PHYS + UART01x_DR)
> > > +#define BCM476X_UART_FR IOMEM(BCM476X_DEBUG_PHYS + UART01x_FR)
> > > +#define BCM476X_UART_CR IOMEM(BCM476X_DEBUG_PHYS + UART011_CR)
> > > +
> > > +static inline void putc(int c)
> > > +{
> > > + while (__raw_readl(BCM476X_UART_FR) & UART01x_FR_TXFF)
> > > + barrier();
> > > +
> > > + __raw_writel(c, BCM476X_UART_DR);
> > > + barrier();
> > > +}
> > > +
> > > +static inline void flush(void)
> > > +{
> > > + int fr;
> > > +
> > > + do {
> > > + fr = __raw_readl(BCM476X_UART_FR);
> > > + barrier();
> > > + } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
> > > +}
> > > +
>
> Thank you.
>
> Regards,
> Domenico
More information about the devicetree-discuss
mailing list