[PATCH 0/9] ARM: dts/OMAP: Pinmux audio configuration for OMAP4+

Peter Ujfalusi peter.ujfalusi at ti.com
Thu Oct 4 21:57:19 EST 2012


Hello,

u-boot recently stopped configuring 'non essential' pin mux. This change leaves
the audio essential pins in non configured state which prevents the use of audio.
The following series makes sure that the needed pins are configured correctly by
the kernel on OMAP4 and OMAP5.

Tony: can this series queued for 3.7?

Regards,
Peter
---
Peter Ujfalusi (9):
  ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs
  ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs
  ARM/dts: omap4-panda: Disable unused audio IPs
  ARM/dts: omap4-sdp: Disable unused McBSP3
  ARM/dts: omap5-evm: Disable unused McBSP3
  ARM/dts: omap4-sdp: pinmux configuration for audio
  ARM/dts: omap4-panda: pinmux configuration for audio
  ARM/dts: Add pinctrl driver entries for omap5
  ARM/dts: omap5-evm: pinmux configuration for audio

 arch/arm/boot/dts/omap4-panda.dts      | 47 +++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4-sdp.dts        | 57 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap5-evm.dts        | 58 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi           | 17 ++++++++++
 arch/arm/mach-omap2/board-4430sdp.c    | 26 +++++++++++++++
 arch/arm/mach-omap2/board-omap4panda.c | 15 +++++++++
 6 files changed, 220 insertions(+)

-- 
1.7.12



More information about the devicetree-discuss mailing list