[PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg
Tomasz Figa
t.figa at samsung.com
Thu Nov 29 00:02:27 EST 2012
Hi Praveen,
On Friday 23 of November 2012 09:56:37 Praveen Paneri wrote:
> >> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
> >> +{
> >> + void __iomem *regs = sphy->regs;
> >> + u32 phypwr;
> >> + u32 phyclk;
> >> + u32 rstcon;
> >> +
> >> + /* set clock frequency for PLL */
> >> + phyclk = sphy->ref_clk_freq;
> >> + phypwr = readl(regs + SAMSUNG_PHYPWR);
> >> + rstcon = readl(regs + SAMSUNG_RSTCON);
> >> +
> >> + switch (sphy->cpu_type) {
> >> + case TYPE_S3C64XX:
> >> + phyclk &= ~PHYCLK_COMMON_ON_N;
> >> + phypwr &= ~PHYPWR_NORMAL_MASK;
> >> + rstcon |= RSTCON_SWRST;
> >> + break;
> >> + case TYPE_EXYNOS4210:
> >> + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
> >> + rstcon |= RSTCON_SWRST;
> >> + default:
> >> + break;
> >> + }
> >> +
> >> + writel(phyclk, regs + SAMSUNG_PHYCLK);
> >> + /* set to normal of PHY0 */
> >
> > I don't understand this comment.
>
> Will change it to " Configure PHY0 for normal operation"
> That should be more clear, I suppose.
Yes, much better.
> >> + */
> >> +
> >> +#ifndef __SAMSUNG_USBPHY_PLATFORM_H
> >> +#define __SAMSUNG_USBPHY_PLATFORM_H
> >> +
> >> +/**
> >> + * samsung_usbphy_data - Platform data for USB PHY driver.
> >> + * @pmu_isolation: Function to control usb phy isolation in PMU.
> >> + */
> >> +struct samsung_usbphy_data {
> >> + void (*pmu_isolation)(int on);
> >
> > I believe this should be named in a generic way. This is called PMU
> > isolation on Exynos SoCs, but on S3C64xx it's USB PHY mask.
>
> Yes! I am aware of it. The fact that this ( MASK or ISOLATION) has
> always been part of the PMU, pmu_isolation seems quite generic that
> way. Though you can suggest a better name.
What do you think about set_isolation(int on) or power_isolation(int on)?
Best regards,
--
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Linux Platform
More information about the devicetree-discuss
mailing list