[PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem

Philip, Avinash avinashphilip at ti.com
Tue Nov 27 17:24:03 EST 2012


On Mon, Nov 26, 2012 at 16:37:36, Bedia, Vaibhav wrote:
> Hi Benoit,
> 
> On Mon, Nov 26, 2012 at 14:32:59, Cousson, Benoit wrote:
> > Hi Vaibhav,
> > 
> > On 11/26/2012 06:19 AM, Bedia, Vaibhav wrote:
> > > On Fri, Nov 23, 2012 at 16:36:06, Philip, Avinash wrote:
> > >> On Tue, Nov 20, 2012 at 10:33:44, Philip, Avinash wrote:
> > >>> As part of PWM subsystem integration, PWM subsystem are sharing
> > >>> resources like clock across submodules (ECAP, EQEP & EHRPWM).
> > >>> To handle resource sharing & IP integration
> > >>> 1. Rework on parent child relation between PWMSS and
> > >>>    ECAP, EQEP & EHRPWM child devices to support runtime PM.
> > >>> 2. Add support for opt_clks in EHRPWM HWMOD entry to handle additional
> > >>>    clock gating from control module.
> > >>> 3. Add HWMOD entries for EQEP PWM submodule.
> > >>>
> > >>
> > >> Is there any review on this patch?
> > >> This patch depends on ECAP & EHRPWM to work in am335x.
> > > 
> > > First of all, I think you should break up this patch as per the 3 points
> > > that you mentioned above.

I will split the patches into 2.
1. One for correcting hwmod entries  plus adding EQEP HWMOD entry
2. Adding parent child relation in hwmod entry.

> > > 
> > > The usage of opt_clks for this does not look right to me. Based on your
> > > description this clock is necessary and not optional on AM335x and on 
> > > Davinci platforms this clock does not exist.
> 
> I checked the DA830 TRM and looks like TBCLK for eHRPWM is an always on clock
> there. So, the only difference in AM335x is an additional enable bit.
> 
> Instead of adding this as opt_clk in hwmod, we could add an always on clock node
> in Davinci clock data and have the driver always do a clk_enable() on the tbclk
> as part of the probe sequence. On AM335x, with the right clock node this will enable
> the clock in hardware and on DA830 it turns into a NOP. This way we can avoid adding
> the opt_clk entry in hwmod of eHRPWM.

I will remove opt_clk in HWMOD and made tbclk is a mandatory clock in EHRPWM driver.

Thanks
Avinash


More information about the devicetree-discuss mailing list