[PATCH 6/9] usb: chipidea: add PTW and PTS handling

Peter Chen peter.chen at freescale.com
Tue Nov 27 12:12:30 EST 2012


On Wed, Nov 14, 2012 at 05:19:07PM +0100, Michael Grzeschik wrote:
>  /**
>   * hw_device_reset: resets chip (execute without interruption)
>   * @ci: the controller
> @@ -237,6 +256,8 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
>  	if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
>  		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
>  
> +	hw_portsc_configure(ci);
> +
>  	/* USBMODE should be configured step by step */
>  	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
>  	hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
> @@ -522,6 +543,32 @@ void ci13xxx_remove_device(struct platform_device *pdev)
>  }
>  EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
>  
> +void ci13xxx_get_dr_flags(struct device_node *of_node, struct ci13xxx_platform_data *pdata)
> +{
> +	int interface = of_get_usbphy_mode(of_node);
> +
> +	switch (interface) {
> +	case USBPHY_INTERFACE_MODE_UTMI:
> +		pdata->flags |= CI13XXX_PORTSC_PTS_UTMI;
> +		break;
> +	case USBPHY_INTERFACE_MODE_UTMIW:
> +		pdata->flags |= CI13XXX_PORTSC_PTS_UTMI |
> +			CI13XXX_PORTSC_PTW_16BIT;
> +		break;
> +	case USBPHY_INTERFACE_MODE_ULPI:
> +		pdata->flags |= CI13XXX_PORTSC_PTS_ULPI;
> +		break;
> +	case USBPHY_INTERFACE_MODE_SERIAL:
> +		pdata->flags |= CI13XXX_PORTSC_PTS_FSLS;
> +		break;
> +	case USBPHY_INTERFACE_MODE_NA:
> +	default:
> +		pr_err("no phy interface defined\n");
> +	}
> +
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_get_dr_flags);
> +
>  void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata)
>  {
>  	const unsigned char *dr_mode;
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index ebff9f4..b23ee1d 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -106,6 +106,10 @@ static int host_start(struct ci13xxx *ci)
>  	if (usb_disabled())
>  		return -ENODEV;
>  
> +	hw_portsc_configure(ci);
> +
> +	mdelay(10);
is usleep_range ok?
Why host needs 10ms delay, but peripheral mode doesn't?

> +
>  	hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
>  	if (!hcd)
>  		return -ENOMEM;
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 906d259..cafca23 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -21,6 +21,12 @@ struct ci13xxx_platform_data {
>  #define CI13XXX_DISABLE_STREAMING	BIT(3)
>  #define CI13XXX_DR_MODE_HOST		BIT(4)
>  #define CI13XXX_DR_MODE_PERIPHERAL	BIT(5)
> +#define CI13XXX_PORTSC_PTW_8BIT		BIT(6)
> +#define CI13XXX_PORTSC_PTW_16BIT	BIT(7)
> +#define CI13XXX_PORTSC_PTS_UTMI		BIT(8)
> +#define CI13XXX_PORTSC_PTS_ULPI		BIT(9)
> +#define CI13XXX_PORTSC_PTS_FSLS		BIT(10)
> +
>  #define CI13XXX_DR_MODE_MASK \
>  	(CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_PERIPHERAL)
>  
> @@ -42,4 +48,7 @@ void ci13xxx_remove_device(struct platform_device *pdev);
>  /* Parse of-tree "dr_mode" property */
>  void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
>  
> +/* Parse of-tree "flags" */
> +void ci13xxx_get_dr_flags(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
> +
>  #endif
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 

Best Regards,
Peter Chen



More information about the devicetree-discuss mailing list