[PATCH V2 2/2] mfd: stmpe: Extend DT support in stmpe driver

[Lee Jones]

On Fri, 23 Nov 2012, Viresh Kumar wrote:

> On 22 November 2012 16:54, Lee Jones <lee.jones at linaro.org> wrote:
> >> diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
> >> +Optional properties:
> >> +- irq-trigger: IRQ trigger to use for the interrupt to the host
> >> +- irq-invert-polarity: bool, IRQ line is connected with reversed polarity
> >
> > Are these new?
> >
> > When adding new bindings, ask yourself:
> 
> I was trying to get information of these two bindings from other sources,
> but couldn't find. The only other place can be the interrupts field, right?

Bingo. Continue along this thread.

> Because interrupts field depends on the interrupt controller, which can
> be a wide variety of controllers in our case, we can't use that. Also,
> the cells of interrupts field will have something that is required to be
> programmed in the interrupt controller and not in the user of IC.
> 
> But here we are talking about programming stmpe and so these bindings
> are very much required in stmpe only.

Not true.

Hint: `git grep triggered -- Documentation/devicetree/`

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog