[PATCHv13 4/7] fbmon: add videomode helpers

Steffen Trumtrar s.trumtrar at pengutronix.de
Fri Nov 23 19:03:19 EST 2012


On Fri, Nov 23, 2012 at 12:52:08AM +0100, Laurent Pinchart wrote:
> On Friday 23 November 2012 00:09:49 Steffen Trumtrar wrote:
> > On Thu, Nov 22, 2012 at 07:31:39PM +0100, Laurent Pinchart wrote:
> > > On Thursday 22 November 2012 17:00:12 Steffen Trumtrar wrote:
> > > > Add a function to convert from the generic videomode to a fb_videomode.
> > > > 
> > > > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > > > Reviewed-by: Thierry Reding <thierry.reding at avionic-design.de>
> > > > Acked-by: Thierry Reding <thierry.reding at avionic-design.de>
> > > > Tested-by: Thierry Reding <thierry.reding at avionic-design.de>
> > > > Tested-by: Philipp Zabel <p.zabel at pengutronix.de>
> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > > Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > > > ---
> > > > 
> > > >  drivers/video/fbmon.c |   44 ++++++++++++++++++++++++++++++++++++++++++
> > > >  include/linux/fb.h    |    6 ++++++
> > > >  2 files changed, 50 insertions(+)
> > > > 
> > > > diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> > > > index cef6557..a6a564d 100644
> > > > --- a/drivers/video/fbmon.c
> > > > +++ b/drivers/video/fbmon.c
> > > > @@ -31,6 +31,7 @@
> > > > 
> > > >  #include <linux/pci.h>
> > > >  #include <linux/slab.h>
> > > >  #include <video/edid.h>
> > > > 
> > > > +#include <linux/videomode.h>
> > > > 
> > > >  #ifdef CONFIG_PPC_OF
> > > >  #include <asm/prom.h>
> > > >  #include <asm/pci-bridge.h>
> > > > 
> > > > @@ -1373,6 +1374,49 @@ int fb_get_mode(int flags, u32 val, struct
> > > > fb_var_screeninfo *var, struct fb_inf kfree(timings);
> > > > 
> > > >  	return err;
> > > >  
> > > >  }
> > > > 
> > > > +
> > > > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > > > +int fb_videomode_from_videomode(const struct videomode *vm,
> > > > +				struct fb_videomode *fbmode)
> > > > +{
> > > > +	unsigned int htotal, vtotal;
> > > > +
> > > > +	fbmode->xres = vm->hactive;
> > > > +	fbmode->left_margin = vm->hback_porch;
> > > > +	fbmode->right_margin = vm->hfront_porch;
> > > > +	fbmode->hsync_len = vm->hsync_len;
> > > > +
> > > > +	fbmode->yres = vm->vactive;
> > > > +	fbmode->upper_margin = vm->vback_porch;
> > > > +	fbmode->lower_margin = vm->vfront_porch;
> > > > +	fbmode->vsync_len = vm->vsync_len;
> > > > +
> > > > +	fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> > > 
> > > This results in a division by 0 if vm->pixelclock is equal to zero. As the
> > > information is missing from many board files, what would you think about
> > > the following ?
> > > 
> > > 	fbmode->pixclock = vm->pixelclock ? KHZ2PICOS(vm->pixelclock / 1000) : 0;
> > 
> > Grrr...you are right. I will fix that...
> 
> Thank you.
> 

I have to thank you for bulletproofing my code o/\o

> > > > +	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
> > > > +		 vm->hsync_len;
> > > > +	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
> > > > +		 vm->vsync_len;
> > > > +	fbmode->refresh = vm->pixelclock / (htotal * vtotal);
> > > > +
> > 
> > ...and obviously this, too.
> 
> That one is less of an issue in my opinion. A mode with a zero htotal or 
> vtotal is clearly invalid, while we have modes with no pixel clock value.
> 

Yes, you I are right. But while I'm on it, might as well prevent an error.

Regards,
Steffen
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


More information about the devicetree-discuss mailing list