[PATCH] input: stmpe-ts: Add DT support for stmpe touchscreen
Viresh Kumar
viresh.kumar at linaro.org
Fri Nov 23 17:29:46 EST 2012
From: Vipul Kumar Samar <vipulkumar.samar at st.com>
This patch allows the STMPE Touchscreen driver to be successfully probed and
initialised when Device Tree support is enabled. Bindings are mentioned in
Documentation too.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar at st.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
.../bindings/input/touchscreen/stmpe.txt | 43 ++++++++++++++
drivers/input/touchscreen/stmpe-ts.c | 65 ++++++++++++++++------
drivers/mfd/stmpe.c | 1 +
3 files changed, 91 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
new file mode 100644
index 0000000..127baa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -0,0 +1,43 @@
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
+ 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
+ -> 144 clocks), recommended is 4.
+- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
+ reference)
+- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
+ samples, 3 -> 8 samples)
+- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
+ 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
+ is 3
+- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
+ -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
+- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
+ the fractional part) recommended is 7
+- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
+ mA max, 1 -> 50 mA typical 80 mA max)
+
+Node name must be stmpe_touchscreen and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index b3f7503..8f4985a 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/slab.h>
@@ -262,11 +263,53 @@ static void stmpe_ts_close(struct input_dev *dev)
STMPE_TSC_CTRL_TSC_EN, 0);
}
-static int __devinit stmpe_input_probe(struct platform_device *pdev)
+static void stmpe_ts_get_info(struct platform_device *pdev,
+ struct stmpe_touch *ts)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- const struct stmpe_platform_data *pdata = stmpe->pdata;
- const struct stmpe_ts_platform_data *ts_pdata = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct stmpe_ts_platform_data *ts_pdata = NULL;
+
+ ts->stmpe = stmpe;
+
+ if (stmpe->pdata && stmpe->pdata->ts) {
+ ts_pdata = stmpe->pdata->ts;
+
+ ts->sample_time = ts_pdata->sample_time;
+ ts->mod_12b = ts_pdata->mod_12b;
+ ts->ref_sel = ts_pdata->ref_sel;
+ ts->adc_freq = ts_pdata->adc_freq;
+ ts->ave_ctrl = ts_pdata->ave_ctrl;
+ ts->touch_det_delay = ts_pdata->touch_det_delay;
+ ts->settling = ts_pdata->settling;
+ ts->fraction_z = ts_pdata->fraction_z;
+ ts->i_drive = ts_pdata->i_drive;
+ } else if (np) {
+ u32 val;
+
+ if (!of_property_read_u32(np, "st,sample-time", &val))
+ ts->sample_time = val;
+ if (!of_property_read_u32(np, "st,mod-12b", &val))
+ ts->mod_12b = val;
+ if (!of_property_read_u32(np, "st,ref-sel", &val))
+ ts->ref_sel = val;
+ if (!of_property_read_u32(np, "st,adc-freq", &val))
+ ts->adc_freq = val;
+ if (!of_property_read_u32(np, "st,ave-ctrl", &val))
+ ts->ave_ctrl = val;
+ if (!of_property_read_u32(np, "st,touch-det-delay", &val))
+ ts->touch_det_delay = val;
+ if (!of_property_read_u32(np, "st,settling", &val))
+ ts->settling = val;
+ if (!of_property_read_u32(np, "st,fraction-z", &val))
+ ts->fraction_z = val;
+ if (!of_property_read_u32(np, "st,i-drive", &val))
+ ts->i_drive = val;
+ }
+}
+
+static int __devinit stmpe_input_probe(struct platform_device *pdev)
+{
struct stmpe_touch *ts;
struct input_dev *idev;
int error;
@@ -285,24 +328,10 @@ static int __devinit stmpe_input_probe(struct platform_device *pdev)
return -ENOMEM;
platform_set_drvdata(pdev, ts);
- ts->stmpe = stmpe;
ts->idev = idev;
ts->dev = &pdev->dev;
- if (pdata)
- ts_pdata = pdata->ts;
-
- if (ts_pdata) {
- ts->sample_time = ts_pdata->sample_time;
- ts->mod_12b = ts_pdata->mod_12b;
- ts->ref_sel = ts_pdata->ref_sel;
- ts->adc_freq = ts_pdata->adc_freq;
- ts->ave_ctrl = ts_pdata->ave_ctrl;
- ts->touch_det_delay = ts_pdata->touch_det_delay;
- ts->settling = ts_pdata->settling;
- ts->fraction_z = ts_pdata->fraction_z;
- ts->i_drive = ts_pdata->i_drive;
- }
+ stmpe_ts_get_info(pdev, ts);
INIT_DELAYED_WORK(&ts->work, stmpe_work);
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index c757ac3..3e3ca9c 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -410,6 +410,7 @@ static struct resource stmpe_ts_resources[] = {
static struct mfd_cell stmpe_ts_cell = {
.name = "stmpe-ts",
+ .of_compatible = "st,stmpe-ts",
.resources = stmpe_ts_resources,
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
};
--
1.7.12.rc2.18.g61b472e
More information about the devicetree-discuss
mailing list