[PATCH v12 3/6] fbmon: add videomode helpers
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Nov 22 09:02:44 EST 2012
Hi Steffen,
Sorry, I've just found another small bug below.
On Tuesday 20 November 2012 16:54:53 Steffen Trumtrar wrote:
> Add a function to convert from the generic videomode to a fb_videomode.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> Reviewed-by: Thierry Reding <thierry.reding at avionic-design.de>
> Acked-by: Thierry Reding <thierry.reding at avionic-design.de>
> Tested-by: Thierry Reding <thierry.reding at avionic-design.de>
> Tested-by: Philipp Zabel <p.zabel at pengutronix.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> drivers/video/fbmon.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/fb.h | 6 ++++++
> 2 files changed, 52 insertions(+)
>
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index cef6557..c1939a6 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -31,6 +31,7 @@
> #include <linux/pci.h>
> #include <linux/slab.h>
> #include <video/edid.h>
> +#include <linux/videomode.h>
> #ifdef CONFIG_PPC_OF
> #include <asm/prom.h>
> #include <asm/pci-bridge.h>
> @@ -1373,6 +1374,51 @@ int fb_get_mode(int flags, u32 val, struct
> fb_var_screeninfo *var, struct fb_inf kfree(timings);
> return err;
> }
> +
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int fb_videomode_from_videomode(const struct videomode *vm,
> + struct fb_videomode *fbmode)
> +{
> + unsigned int htotal, vtotal;
> +
> + fbmode->xres = vm->hactive;
> + fbmode->left_margin = vm->hback_porch;
> + fbmode->right_margin = vm->hfront_porch;
> + fbmode->hsync_len = vm->hsync_len;
> +
> + fbmode->yres = vm->vactive;
> + fbmode->upper_margin = vm->vback_porch;
> + fbmode->lower_margin = vm->vfront_porch;
> + fbmode->vsync_len = vm->vsync_len;
> +
> + fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> +
> + fbmode->sync = 0;
> + fbmode->vmode = 0;
> + if (vm->hah)
> + fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> + if (vm->vah)
> + fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> + if (vm->interlaced)
> + fbmode->vmode |= FB_VMODE_INTERLACED;
> + if (vm->doublescan)
> + fbmode->vmode |= FB_VMODE_DOUBLE;
> + if (vm->de)
> + fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
> + fbmode->flag = 0;
> +
> + htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
> + vm->hsync_len;
> + vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
> + vm->vsync_len;
> + fbmode->refresh = (vm->pixelclock * 1000) / (htotal * vtotal);
This will fail if vm->pixelclock >= ((1 << 32) / 1000). The easiest solution
is probably to use 64-bit computation.
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> +#endif
> +
> +
> #else
> int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
> {
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index c7a9571..920cbe3 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -14,6 +14,7 @@
> #include <linux/backlight.h>
> #include <linux/slab.h>
> #include <asm/io.h>
> +#include <linux/videomode.h>
>
> struct vm_area_struct;
> struct fb_info;
> @@ -714,6 +715,11 @@ extern void fb_destroy_modedb(struct fb_videomode
> *modedb); extern int fb_find_mode_cvt(struct fb_videomode *mode, int
> margins, int rb); extern unsigned char *fb_ddc_read(struct i2c_adapter
> *adapter);
>
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +extern int fb_videomode_from_videomode(const struct videomode *vm,
> + struct fb_videomode *fbmode);
> +#endif
> +
> /* drivers/video/modedb.c */
> #define VESA_MODEDB_SIZE 34
> extern void fb_var_to_videomode(struct fb_videomode *mode,
--
Regards,
Laurent Pinchart
More information about the devicetree-discuss
mailing list