[PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support

Tomasz Figa tomasz.figa at gmail.com
Thu Nov 22 07:11:57 EST 2012


Hi Praveen,

On Wednesday 14 of November 2012 15:57:16 Praveen Paneri wrote:
> Adding the transceiver to hsotg driver. Keeping the platform data
> for continuing the smooth operation for boards which still uses it
> 
> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  drivers/usb/gadget/s3c-hsotg.c |   37
> +++++++++++++++++++++++++++---------- 1 files changed, 27
> insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/gadget/s3c-hsotg.c
> b/drivers/usb/gadget/s3c-hsotg.c index 6f696ee..bc30a2d 100644
> --- a/drivers/usb/gadget/s3c-hsotg.c
> +++ b/drivers/usb/gadget/s3c-hsotg.c
> @@ -32,6 +32,7 @@
> 
>  #include <linux/usb/ch9.h>
>  #include <linux/usb/gadget.h>
> +#include <linux/usb/phy.h>
>  #include <linux/platform_data/s3c-hsotg.h>
> 
>  #include <mach/map.h>
> @@ -133,7 +134,9 @@ struct s3c_hsotg_ep {
>   * struct s3c_hsotg - driver state.
>   * @dev: The parent device supplied to the probe function
>   * @driver: USB gadget driver
> - * @plat: The platform specific configuration data.
> + * @phy: The otg phy transceiver structure for phy control.
> + * @plat: The platform specific configuration data. This can be removed
> once + * all SoCs support usb transceiver.
>   * @regs: The memory area mapped for accessing registers.
>   * @irq: The IRQ number we are using
>   * @supplies: Definition of USB power supplies
> @@ -153,6 +156,7 @@ struct s3c_hsotg_ep {
>  struct s3c_hsotg {
>  	struct device		 *dev;
>  	struct usb_gadget_driver *driver;
> +	struct usb_phy		*phy;
>  	struct s3c_hsotg_plat	 *plat;
> 
>  	spinlock_t              lock;
> @@ -2854,7 +2858,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg
> *hsotg) struct platform_device *pdev = to_platform_device(hsotg->dev);
> 
>  	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
> -	if (hsotg->plat->phy_init)
> +
> +	if (hsotg->phy)
> +		usb_phy_init(hsotg->phy);
> +	else if (hsotg->plat->phy_init)
>  		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
>  }
> 
> @@ -2869,7 +2876,9 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg
> *hsotg) {
>  	struct platform_device *pdev = to_platform_device(hsotg->dev);
> 
> -	if (hsotg->plat->phy_exit)
> +	if (hsotg->phy)
> +		usb_phy_shutdown(hsotg->phy);
> +	else if (hsotg->plat->phy_exit)
>  		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
>  }
> 
> @@ -3493,6 +3502,7 @@ static void s3c_hsotg_release(struct device *dev)
>  static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
>  {
>  	struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
> +	struct usb_phy *phy;
>  	struct device *dev = &pdev->dev;
>  	struct s3c_hsotg_ep *eps;
>  	struct s3c_hsotg *hsotg;
> @@ -3501,20 +3511,27 @@ static int __devinit s3c_hsotg_probe(struct
> platform_device *pdev) int ret;
>  	int i;
> 
> -	plat = pdev->dev.platform_data;
> -	if (!plat) {
> -		dev_err(&pdev->dev, "no platform data defined\n");
> -		return -EINVAL;
> -	}
> -
>  	hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg),
> GFP_KERNEL); if (!hsotg) {
>  		dev_err(dev, "cannot get memory\n");
>  		return -ENOMEM;
>  	}
> 
> +	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> +	if (IS_ERR_OR_NULL(phy)) {
> +		/* Fallback for pdata */
> +		plat = pdev->dev.platform_data;
> +		if (!plat) {
> +			dev_err(&pdev->dev, "no platform data or transceiver 
defined\n");
> +			return -EPROBE_DEFER;
> +		} else {
> +			hsotg->plat = plat;
> +		}

nitpick: The hsotg->plat = plat; assignment can be made without the else 
statement as well.

Best regards,
Tomasz Figa



More information about the devicetree-discuss mailing list