[PATCH 1/1 v2] of_spi: add generic binding support to specify cs gpio

Grant Likely grant.likely at secretlab.ca
Thu Nov 22 02:17:12 EST 2012


On Thu, 15 Nov 2012 20:19:57 +0100, Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> wrote:
> This will allow to use gpio for chip select with no modification in the
> driver binding
> 
> When use the cs-gpios, the gpio number will be passed via the cs_gpio field
> and the number of chip select will automatically increased with max(hw cs, gpio cs).
> 
> So if for example the controller has 2 CS lines, and the cs-gpios
> property looks like this:
> 
> cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>;
> 
> Then it should be configured so that num_chipselect = 4 with the
> following mapping:
> 
> cs0 : &gpio1 0 0
> cs1 : native
> cs2 : &gpio1 1 0
> cs3 : &gpio1 2 0
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: spi-devel-general at lists.sourceforge.net
> Signed-off-by: Richard Genoud <richard.genoud at gmail.com>

Applied, thanks.

g.


More information about the devicetree-discuss mailing list