[PATCH v12 3/6] fbmon: add videomode helpers

[Steffen Trumtrar]

Hi!

On Wed, Nov 21, 2012 at 04:39:01PM +0530, Leela Krishna Amudala wrote:
> Yes,
> Even I got the same build error.
> later I fixed it by including "#include <linux/mxsfb.h>"
> 
> Best Wishes,
> Leela Krishna.
> 
> On Wed, Nov 21, 2012 at 3:39 PM, Manjunathappa, Prakash
> <prakash.pm at ti.com> wrote:
> > Hi Steffen,
> >
> > I am trying to add DT support for da8xx-fb driver on top of your patches.
> > Encountered below build error. Sorry for reporting it late.
> >
> > On Tue, Nov 20, 2012 at 21:24:53, Steffen Trumtrar wrote:
> >> Add a function to convert from the generic videomode to a fb_videomode.
> >>
> >> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> >> Reviewed-by: Thierry Reding <thierry.reding at avionic-design.de>
> >> Acked-by: Thierry Reding <thierry.reding at avionic-design.de>
> >> Tested-by: Thierry Reding <thierry.reding at avionic-design.de>
> >> Tested-by: Philipp Zabel <p.zabel at pengutronix.de>
> >> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> >> ---
> >>  drivers/video/fbmon.c |   46 ++++++++++++++++++++++++++++++++++++++++++++++
> >>  include/linux/fb.h    |    6 ++++++
> >>  2 files changed, 52 insertions(+)
> >>
> >> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> >> index cef6557..c1939a6 100644
> >> --- a/drivers/video/fbmon.c
> >> +++ b/drivers/video/fbmon.c
> >> @@ -31,6 +31,7 @@
> >>  #include <linux/pci.h>
> >>  #include <linux/slab.h>
> >>  #include <video/edid.h>
> >> +#include <linux/videomode.h>
> >>  #ifdef CONFIG_PPC_OF
> >>  #include <asm/prom.h>
> >>  #include <asm/pci-bridge.h>
> >> @@ -1373,6 +1374,51 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
> >>       kfree(timings);
> >>       return err;
> >>  }
> >> +
> >> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> >> +int fb_videomode_from_videomode(const struct videomode *vm,
> >> +                             struct fb_videomode *fbmode)
> >> +{
> >> +     unsigned int htotal, vtotal;
> >> +
> >> +     fbmode->xres = vm->hactive;
> >> +     fbmode->left_margin = vm->hback_porch;
> >> +     fbmode->right_margin = vm->hfront_porch;
> >> +     fbmode->hsync_len = vm->hsync_len;
> >> +
> >> +     fbmode->yres = vm->vactive;
> >> +     fbmode->upper_margin = vm->vback_porch;
> >> +     fbmode->lower_margin = vm->vfront_porch;
> >> +     fbmode->vsync_len = vm->vsync_len;
> >> +
> >> +     fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> >> +
> >> +     fbmode->sync = 0;
> >> +     fbmode->vmode = 0;
> >> +     if (vm->hah)
> >> +             fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> >> +     if (vm->vah)
> >> +             fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> >> +     if (vm->interlaced)
> >> +             fbmode->vmode |= FB_VMODE_INTERLACED;
> >> +     if (vm->doublescan)
> >> +             fbmode->vmode |= FB_VMODE_DOUBLE;
> >> +     if (vm->de)
> >> +             fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
> >
> > "FB_SYNC_DATA_ENABLE_HIGH_ACT" seems to be mxsfb specific flag, I am getting
> > build error on this. Please let me know if I am missing something.
> >
> > Thanks,
> > Prakash
> >

I compile-tested the series and didn't have that error. But obviously I should
have. As this is a mxsfs flag, I will throw it out.

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |