[PATCH v5 6/8] watchdog: at91sam9_wdt: add timeout-sec property binding

Nicolas Ferre nicolas.ferre at atmel.com
Wed Nov 21 00:01:03 EST 2012


On 11/19/2012 03:10 PM, Fabio Porcedda :
> Tested on at91sam9260 board (evk-pro3).
> 
> Signed-off-by: Fabio Porcedda <fabio.porcedda at gmail.com>
> Cc: Andrew Victor <linux at maxim.org.za>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>

Seems good:
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  Documentation/devicetree/bindings/watchdog/atmel-wdt.txt |  4 ++++
>  drivers/watchdog/Kconfig                                 |  1 +
>  drivers/watchdog/at91sam9_wdt.c                          | 16 +++++++++++++---
>  3 files changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> index 2957ebb..fcdd48f 100644
> --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> @@ -7,9 +7,13 @@ Required properties:
>  - reg: physical base address of the controller and length of memory mapped
>    region.
>  
> +Optional properties:
> +- timeout-sec: contains the watchdog timeout in seconds.
> +
>  Example:
>  
>  	watchdog at fffffd40 {
>  		compatible = "atmel,at91sam9260-wdt";
>  		reg = <0xfffffd40 0x10>;
> +		timeout-sec = <10>;
>  	};
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index ad1bb93..dda695f 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -114,6 +114,7 @@ config AT91RM9200_WATCHDOG
>  config AT91SAM9X_WATCHDOG
>  	tristate "AT91SAM9X / AT91CAP9 watchdog"
>  	depends on ARCH_AT91 && !ARCH_AT91RM9200
> +	select WATCHDOG_CORE
>  	help
>  	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
>  	  reboot your system when the timeout is reached.
> diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
> index dc42e44..d864dc4 100644
> --- a/drivers/watchdog/at91sam9_wdt.c
> +++ b/drivers/watchdog/at91sam9_wdt.c
> @@ -57,8 +57,10 @@
>  #define WDT_TIMEOUT	(HZ/2)
>  
>  /* User land timeout */
> +#define MIN_HEARTBEAT 1
> +#define MAX_HEARTBEAT 16
>  #define WDT_HEARTBEAT 15
> -static int heartbeat = WDT_HEARTBEAT;
> +static int heartbeat;
>  module_param(heartbeat, int, 0);
>  MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
>  	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> @@ -255,6 +257,12 @@ static struct miscdevice at91wdt_miscdev = {
>  	.fops		= &at91wdt_fops,
>  };
>  
> +static struct watchdog_device at91wdt_wdd __initdata = {
> +	.timeout = WDT_HEARTBEAT,
> +	.min_timeout = MIN_HEARTBEAT,
> +	.max_timeout = MAX_HEARTBEAT,
> +};
> +
>  static int __init at91wdt_probe(struct platform_device *pdev)
>  {
>  	struct resource	*r;
> @@ -273,6 +281,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> +	watchdog_init_timeout(&at91wdt_wdd, heartbeat, pdev->dev.of_node);
> +
>  	/* Set watchdog */
>  	res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
>  	if (res)
> @@ -282,12 +292,12 @@ static int __init at91wdt_probe(struct platform_device *pdev)
>  	if (res)
>  		return res;
>  
> -	at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
> +	at91wdt_private.next_heartbeat = jiffies + at91wdt_wdd.timeout * HZ;
>  	setup_timer(&at91wdt_private.timer, at91_ping, 0);
>  	mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
>  
>  	pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
> -		heartbeat, nowayout);
> +		at91wdt_wdd.timeout, nowayout);
>  
>  	return 0;
>  }
> 


-- 
Nicolas Ferre


More information about the devicetree-discuss mailing list