[PATCH v5 3/8] watchdog: orion_wdt: add timeout-sec property binding
Fabio Porcedda
fabio.porcedda at gmail.com
Tue Nov 20 23:50:46 EST 2012
On Mon, Nov 19, 2012 at 5:06 PM, Jason Cooper <jason at lakedaemon.net> wrote:
> On Mon, Nov 19, 2012 at 03:10:38PM +0100, Fabio Porcedda wrote:
>> Only compile tested.
>>
>> Signed-off-by: Fabio Porcedda <fabio.porcedda at gmail.com>
>> Cc: Jason Cooper <jason at lakedaemon.net>
>> Cc: Andrew Lunn <andrew at lunn.ch>
>> ---
>> Documentation/devicetree/bindings/watchdog/marvel.txt | 5 +++++
>> drivers/watchdog/orion_wdt.c | 8 +++-----
>> 2 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
>> index 0b2503a..5dc8d30 100644
>> --- a/Documentation/devicetree/bindings/watchdog/marvel.txt
>> +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
>> @@ -5,10 +5,15 @@ Required Properties:
>> - Compatibility : "marvell,orion-wdt"
>> - reg : Address of the timer registers
>>
>> +Optional properties:
>> +
>> +- timeout-sec : Contains the watchdog timeout in seconds
>> +
>> Example:
>>
>> wdt at 20300 {
>> compatible = "marvell,orion-wdt";
>> reg = <0x20300 0x28>;
>> + timeout-sec = <10>;
>> status = "okay";
>> };
>> diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
>> index c20f96b..446a3e9 100644
>> --- a/drivers/watchdog/orion_wdt.c
>> +++ b/drivers/watchdog/orion_wdt.c
>> @@ -162,12 +162,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
>>
>> wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
>>
>> - if ((heartbeat < 1) || (heartbeat > wdt_max_duration))
>> - heartbeat = wdt_max_duration;
>> -
>> - orion_wdt.timeout = heartbeat;
>> orion_wdt.min_timeout = 1;
>> + orion_wdt.timeout = wdt_max_duration;
>> orion_wdt.max_timeout = wdt_max_duration;
>> + watchdog_init_timeout(&orion_wdt, heartbeat, pdev->dev.of_node);
>
> Hi Fabio,
>
> There are many boards using pdata, !CONFIG_OF. Have you compile-tested
> this without CONFIG_OF?
Hi Jason,
I've tested with and without the CONFIG_OF define.
The first time I’ve used the kirkwood_defconfig without modifications,
the second time I’ve enabled only the CONFIG_MACH_SHEEVAPLUG and
disabled USE_OF.
In both cases the orion_wdt driver compile without any warning.
Thanks for the review.
Best regards
> thx,
>
> Jason.
>
>>
>> watchdog_set_nowayout(&orion_wdt, nowayout);
>> ret = watchdog_register_device(&orion_wdt);
>> @@ -177,7 +175,7 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
>> }
>>
>> pr_info("Initial timeout %d sec%s\n",
>> - heartbeat, nowayout ? ", nowayout" : "");
>> + orion_wdt.timeout, nowayout ? ", nowayout" : "");
>> return 0;
>> }
>>
>> --
>> 1.8.0
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Fabio Porcedda
More information about the devicetree-discuss
mailing list