[PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines

Gregory CLEMENT gregory.clement at free-electrons.com
Sat Nov 17 08:46:15 EST 2012


On 11/14/2012 11:31 PM, Gregory CLEMENT wrote:
> Hello Russell,
> 
> With the 2 changes I have done on according your comments
> do you think you can give your acked-by for this patch?
> 

Hello Russell,

I didn't have any feedback from you for this version.
If you are fine with this, could you give your Acked-by?


Thanks again,

Gregory


> On 11/14/2012 11:20 PM, Gregory CLEMENT wrote:
>> From: Yehuda Yitschak <yehuday at marvell.com>
>>
>> Signed-off-by: Yehuda Yitschak <yehuday at marvell.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
>> ---
>>  arch/arm/mach-mvebu/Kconfig |    2 +-
>>  arch/arm/mm/Kconfig         |    4 ++++
>>  arch/arm/mm/proc-v7.S       |   51 +++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 56 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
>> index 17d246b..9bfaa0c 100644
>> --- a/arch/arm/mach-mvebu/Kconfig
>> +++ b/arch/arm/mach-mvebu/Kconfig
>> @@ -22,7 +22,7 @@ config MVEBU_CLK_CPU
>>  config MACH_ARMADA_370_XP
>>  	bool
>>  	select ARMADA_370_XP_TIMER
>> -	select CPU_V7
>> +	select CPU_PJ4B
>>  
>>  config MACH_ARMADA_370
>>  	bool "Marvell Armada 370 boards"
>> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
>> index 94186b6..3fd629d 100644
>> --- a/arch/arm/mm/Kconfig
>> +++ b/arch/arm/mm/Kconfig
>> @@ -352,6 +352,10 @@ config CPU_PJ4
>>  	select ARM_THUMBEE
>>  	select CPU_V7
>>  
>> +config CPU_PJ4B
>> +	bool
>> +	select CPU_V7
>> +
>>  # ARMv6
>>  config CPU_V6
>>  	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
>> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
>> index 846d279..a4c0ccf 100644
>> --- a/arch/arm/mm/proc-v7.S
>> +++ b/arch/arm/mm/proc-v7.S
>> @@ -169,6 +169,47 @@ __v7_ca15mp_setup:
>>  	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
>>  	mcreq	p15, 0, r0, c1, c0, 1
>>  #endif
>> +
>> +__v7_pj4b_setup:
>> +#ifdef CONFIG_CPU_PJ4B
>> +
>> +#define SNOOP_DATA    (1 << 25) /* Dont interleave write and snoop data */
>> +#define CWF           (1 << 27) /* Disable Critical Word First feature */
>> +#define OUTSANDING_NC (1 << 29) /* Disable outstanding non cacheable request */
>> +#define L1_REP_RR     (1 << 30) /* L1 replacement - Strict round robin */
>> +
>> +#define AUX_DBG_CTRL2 (SNOOP_DATA | CWF | OUTSANDING_NC | L1_REP_RR)
>> +
>> +	/* Auxiliary Debug Modes Control 1 Register */
>> +	mrc	p15, 1,	r0, c15, c1, 1
>> +	orr     r0, r0, #(1 << 16)     @ Disable data transfer for clean line.
>> +	orr     r0, r0, #(1 << 5)      @ Enable the back off of STREX instr
>> +	orr     r0, r0, #(1 << 8)      @ Disable Internal Parity Handling
>> +	bic	r0, r0, #(1 << 2)      @ Disable Static BP
>> +	mcr	p15, 1,	r0, c15, c1, 1
>> +
>> +	/* Auxiliary Debug Modes Control 2 Register */
>> +	mrc	p15, 1,	r0, c15, c1, 2
>> +	bic	r0, r0, #(1 << 23)   @ Enable fast LDR.
>> +	orr	r0, r0, #AUX_DBG_CTRL2
>> +	mcr	p15, 1,	r0, c15, c1, 2
>> +
>> +	/* Auxiliary Functional Modes Control Register 0 */
>> +	mrc	p15, 1,	r0, c15, c2, 0
>> +#ifdef CONFIG_SMP
>> +	orr	r0, r0, #(1 << 1)     @ Set SMP mode. Join the coherency fabric
>> +#endif
>> +	orr	r0, r0, #(1 << 2)     @ Support L1 parity checking
>> +	orr	r0, r0, #(1 << 8)     @ Broadcast Cache and TLB maintenance
>> +	mcr	p15, 1,	r0, c15, c2, 0
>> +
>> +	/* Auxiliary Debug Modes Control 0 Register */
>> +	mrc	p15, 1,	r0, c15, c1, 0
>> +	orr	r0, r0, #(1 << 22)   @ WFI/WFE - serve the DVM and back to idle
>> +	mcr	p15, 1,	r0, c15, c1, 0
>> +
>> +#endif /* CONFIG_CPU_PJ4B */
>> +
>>  __v7_setup:
>>  	adr	r12, __v7_setup_stack		@ the local stack
>>  	stmia	r12, {r0-r5, r7, r9, r11, lr}
>> @@ -342,6 +383,16 @@ __v7_ca9mp_proc_info:
>>  	.long	0xff0ffff0
>>  	__v7_proc __v7_ca9mp_setup
>>  	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
>> +
>> +	/*
>> +	 * Marvell PJ4B processor.
>> +	 */
>> +	.type   __v7_pj4b_proc_info, #object
>> +__v7_pj4b_proc_info:
>> +	.long	0x562f5840
>> +	.long	0xfffffff0
>> +	__v7_proc __v7_pj4b_setup
>> +	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
>>  #endif	/* CONFIG_ARM_LPAE */
>>  
>>  	/*
>>
> 
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com


More information about the devicetree-discuss mailing list