[PATCH 6/9] usb: chipidea: add PTW and PTS handling

Alexander Shishkin alexander.shishkin at linux.intel.com
Sat Nov 17 00:34:23 EST 2012


Michael Grzeschik <mgr at pengutronix.de> writes:

> On Fri, Nov 16, 2012 at 02:45:39PM +0200, Alexander Shishkin wrote:
>> Michael Grzeschik <m.grzeschik at pengutronix.de> writes:
>> 
>> > This patch makes it possible to configure the PTW and PTS bits inside
>> > the portsc register for host and device mode before the driver starts
>> > and the phy can be addressed as hardware implementation is designed.
>> >
>> > Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
>> > Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
>> > ---
>> >  drivers/usb/chipidea/bits.h        |    3 +++
>> >  drivers/usb/chipidea/ci.h          |    2 ++
>> >  drivers/usb/chipidea/ci13xxx_imx.c |    1 +
>> >  drivers/usb/chipidea/core.c        |   47 ++++++++++++++++++++++++++++++++++++
>> >  drivers/usb/chipidea/host.c        |    4 +++
>> >  include/linux/usb/chipidea.h       |    9 +++++++
>> >  6 files changed, 66 insertions(+)
>> >
>> > diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
>> > index 4b6ae3e..3cded5f 100644
>> > --- a/drivers/usb/chipidea/bits.h
>> > +++ b/drivers/usb/chipidea/bits.h
>> > @@ -48,6 +48,9 @@
>> >  #define PORTSC_SUSP           BIT(7)
>> >  #define PORTSC_HSP            BIT(9)
>> >  #define PORTSC_PTC            (0x0FUL << 16)
>> > +#define PORTSC_PTS            (BIT(31) | BIT(30))
>> > +#define PORTSC_PTW            BIT(28)
>> > +#define PORTSC_STS            BIT(29)
>> 
>> Hm, my spec says these are actually in DEVLC register and only have this
>> meaning in device mode. And in portsc these bits fall in device address
>> bitfield. Can you refer me to your spec?
>
> You can find it here:
> http://cache.freescale.com/files/32bit/doc/ref_manual/iMX53RM.pdf?fpsp=1
> Page 4947

Oh, but see, the offset is 0x184, which in chipidea spec (the version
that I have) corresponds to DEVLC and not PORTSC. So in this driver's
terminology it's DEVLC too, at least currently.

So have you tested this code and did it make any difference?

> We as well do have the original documentation from Synopsys in which there
> there is an DEVLC register in the index, but nowhere else in the Datasheet.

Maybe it's a leftover from the old terminology, which would explain the
confusion.

> June 2011 - Doc.Rev. 2.40a
> USB 2.0 High Speed Atlantic Controller

Yes, mine is from 2009.

Regards,
--
Alex


More information about the devicetree-discuss mailing list