[U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec

Stephen Warren swarren at wwwdotorg.org
Fri Nov 16 10:46:28 EST 2012


On 11/15/2012 04:31 PM, Simon Glass wrote:
> Hi Stephen,
> 
> On Wed, Oct 31, 2012 at 9:50 PM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>> On 10/31/2012 05:59 PM, Simon Glass wrote:
>>> Hi,
>>>
>>> On Fri, Oct 26, 2012 at 12:17 AM, Lucas Stach <dev at lynxeye.de> wrote:
>>>> Am Donnerstag, den 25.10.2012, 19:31 -0700 schrieb Simon Glass:
>>>>> From: Sean Paul <seanpaul at chromium.org>
>>>>>
>>>>> Add get and set gpio functions to fdtdec that take into account the
>>>>> polarity field in fdtdec_gpio_state.flags.
>>>>>
>>>> In another thread Stephen Warren and I came to the conclusion that we
>>>> most likely should remove this polarity flag from the GPIO bindings.
>>>>
>>>> Currently it is only for the USB VBUS GPIO which should move over to
>>>> regulators once they land in U-Boot. Do you have any other applications
>>>> for this flag, so we might reconsider removing it?
>>>>
>>>
>>> Well, any time you have a flag which is inverted in meaning, it can be
>>> useful. We have several switches on the board which can be active high
>>> or low, and polarity is used for that.
>>>
>>> In fact, it would be nice IMO to be able to specify input/output as
>>> well. I know the exynos bindings do this. There is a noddy function
>>> called fdtdec_setup_gpio() in U-Boot which really needs to be sorted
>>> out. I discussed with Stephen some time ago how GPIOs should be
>>> SOC-specific and it should be possible to set up a GPIO with a single
>>> call, as Linux does. The more information there is in the binding, the
>>> more it can do automatically.
>>>
>>> Does the Tegra Linux GPIO binding still have a polarity?
>>
>> Yes it does, although in practice it can't be used (and hence should
>> really be removed), since not all GPIO bindings have such a flag, so
>> there is always a need for a separate property to indicate the polarity
>> (c.f. fixed-regulator with GPIO control bindings for example).
>>
> 
> I've had a bit of time to look into this. I see that the regulator
> framework in the kernel seems to be used for various control purposes,
> and provides useful polarity stuff. I was rather hoping that GPIOs
> could be a bit more high level in U-Boot, with information about:
> 
> - input/output
> - drive strength
> - polarity
> - pull up/down
> 
> In fact most of these are actually supported in most kernel bindings,
> but of course it is binding-specific. Would it be useful to ask for a
> polarity setting in the GPIO. When it is not available, the polarity
> would then always be normal.
> 
> This might avoid moving polarity and input/output selecting down into
> each client of the gpio, which seems undesirable in general.
> 
> Should we consider a second level of indirection for GPIOs to support
> these non-binding features? It seems a bit complicated though.
> 
> However, if it is too late to do this, or not desirable for some
> reason, then we should just drop this patch.

The issue may not be bad enough we have to drop flag usage. It's also
being discussed at:

http://www.spinics.net/lists/arm-kernel/msg206299.html

I'd recommend seeing how that pans out before making a decision whether
to start/keep using flags or not.



More information about the devicetree-discuss mailing list