[PATCH v3 07/11] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed

Tomasz Figa tomasz.figa at gmail.com
Thu Nov 15 10:36:16 EST 2012


On Thursday 15 of November 2012 03:37:29 Thomas Abraham wrote:
> The clock speed of xxti and xusbxti clocks depends on the oscillator
> used on the board to generate these clocks. For non-dt platforms, allow
> the board support for those platforms to set the clock frequency of
> xxti and xusbxti clocks.
> 
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/mach-exynos/common.c              |    2 ++
>  arch/arm/mach-exynos/common.h              |    1 +
>  arch/arm/mach-exynos/mach-nuri.c           |    2 ++
>  arch/arm/mach-exynos/mach-origen.c         |    2 ++
>  arch/arm/mach-exynos/mach-smdkv310.c       |    2 ++
>  arch/arm/mach-exynos/mach-universal_c210.c |    2 ++
>  arch/arm/mach-exynos/mct.c                 |    1 +
>  7 files changed, 12 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/common.c
> b/arch/arm/mach-exynos/common.c index 138a41d..64c0012 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -65,6 +65,8 @@ static void exynos5_init_clocks(int xtal);
>  static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
>  static int exynos_init(void);
> 
> +unsigned long xxti_f = 0, xusbxti_f = 0;
> +
>  static struct cpu_table cpu_ids[] __initdata = {
>  	{
>  		.idcode		= EXYNOS4210_CPU_ID,
> diff --git a/arch/arm/mach-exynos/common.h
> b/arch/arm/mach-exynos/common.h index 2cacd48..f947789 100644
> --- a/arch/arm/mach-exynos/common.h
> +++ b/arch/arm/mach-exynos/common.h
> @@ -22,6 +22,7 @@ void exynos4_restart(char mode, const char *cmd);
>  void exynos5_restart(char mode, const char *cmd);
>  void exynos_init_late(void);
> 
> +extern unsigned long xxti_f, xusbxti_f;
>  void exynos4_clk_init(void);
>  void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
> 
> diff --git a/arch/arm/mach-exynos/mach-nuri.c
> b/arch/arm/mach-exynos/mach-nuri.c index 5b5c941..e14332c 100644
> --- a/arch/arm/mach-exynos/mach-nuri.c
> +++ b/arch/arm/mach-exynos/mach-nuri.c
> @@ -1332,6 +1332,8 @@ static void __init nuri_map_io(void)
>  {
>  	exynos_init_io(NULL, 0);
>  	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
> +	xxti_f = 0;
> +	xusbxti_f = 24000000;

I don't like setting these variables directly from board code.

If you didn't remove clock initialization call from board code, you could 
extend that function to take these two frequencies as arguments?

>  }
> 
>  static void __init nuri_reserve(void)
[snip]
> diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
> index c2e806c..cd061b2 100644
> --- a/arch/arm/mach-exynos/mct.c
> +++ b/arch/arm/mach-exynos/mct.c
> @@ -532,6 +532,7 @@ static void __init exynos4_timer_init(void)
>  		if (soc_is_exynos4210() || soc_is_exynos4212() ||
>  				soc_is_exynos4412()) {
>  			exynos4_clk_init();
> +			exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);

I don't like registering clocks from unrelated code. IMHO any clock 
registration should be done from code in drivers/clk/samsung.

Best regards,
Tomasz Figa



More information about the devicetree-discuss mailing list