[PATCH v3 1/2] leds/tca6507: Add support for devicetree.
Bryan Wu
cooloney at gmail.com
Wed Nov 14 12:01:37 EST 2012
On Mon, Nov 12, 2012 at 1:25 PM, Marek Belisko
<marek.belisko at open-nandra.com> wrote:
> Support added only for leds (not for gpio's).
>
> Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> ---
>
> Changes from v2:
> - change compatible property to "ti,tca6507"
> - add documentation for linux,default-trigger
>
> Changes from v1:
> - return proper error value not NULL from tca6507_led_dt_init()
> - remove empty lines
> - remove kfree()
>
> drivers/leds/leds-tca6507.c | 70 +++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 67 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
> index dabcf7a..fdc1ea6 100644
> --- a/drivers/leds/leds-tca6507.c
> +++ b/drivers/leds/leds-tca6507.c
> @@ -667,6 +667,66 @@ static void tca6507_remove_gpio(struct tca6507_chip *tca)
> }
> #endif /* CONFIG_GPIOLIB */
>
> +#ifdef CONFIG_OF
> +static struct tca6507_platform_data * __devinit tca6507_led_dt_init(struct i2c_client *client)
> +{
> + struct device_node *np = client->dev.of_node, *child;
> + struct tca6507_platform_data *pdata;
> + struct led_info *tca_leds;
> + int count = 0;
> +
> + for_each_child_of_node(np, child)
> + count++;
> + if (!count)
> + return ERR_PTR(-ENODEV);
> +
> + if (count > NUM_LEDS)
> + return ERR_PTR(-ENODEV);
> +
> + tca_leds = devm_kzalloc(&client->dev, sizeof(struct led_info) * NUM_LEDS, GFP_KERNEL);
I guess it should be 'sizeof(struct led_info) * count' instead of
'sizeof(struct led_info) * NUM_LEDS'
> + if (!tca_leds)
> + return ERR_PTR(-ENOMEM);
> +
> + for_each_child_of_node(np, child) {
> + struct led_info led;
> + u32 reg;
> + int ret;
> +
> + led.name = of_get_property(child, "label", NULL) ? : child->name;
> + led.default_trigger =
> + of_get_property(child, "linux,default-trigger", NULL);
> +
> + ret = of_property_read_u32(child, "reg", ®);
> +
one more empty line
> + if (ret != 0)
> + continue;
you can put one empty line here,
> + tca_leds[reg] = led;
> + }
> + pdata = devm_kzalloc(&client->dev, sizeof(struct tca6507_platform_data), GFP_KERNEL);
> + if (!pdata) {
no need {} here for just one line of this scope.
> + return ERR_PTR(-ENOMEM);
> + }
remove this.
> +
> + pdata->leds.leds = tca_leds;
> + pdata->leds.num_leds = NUM_LEDS;
I think it should '= count' instead of '= NUM_LEDS'.
> +
> + return pdata;
> +}
> +
> +static const struct of_device_id of_tca6507_leds_match[] = {
> + { .compatible = "ti,tca6507", },
> + {},
> +};
> +
> +#else
> +static int __devinit tca6507_led_dt_init(struct i2c_client *client, struct tca6507_platform_data *data)
> +{
> + return -1;
> +}
> +
> +#define of_tca6507_leds_match NULL
> +#endif
> +
> static int __devinit tca6507_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -683,9 +743,12 @@ static int __devinit tca6507_probe(struct i2c_client *client,
> return -EIO;
>
> if (!pdata || pdata->leds.num_leds != NUM_LEDS) {
> - dev_err(&client->dev, "Need %d entries in platform-data list\n",
> - NUM_LEDS);
> - return -ENODEV;
> + pdata = tca6507_led_dt_init(client);
> + if (IS_ERR(pdata)) {
> + dev_err(&client->dev, "Need %d entries in platform-data list\n",
> + NUM_LEDS);
> + return PTR_ERR(pdata);
> + }
> }
> tca = devm_kzalloc(&client->dev, sizeof(*tca), GFP_KERNEL);
> if (!tca)
> @@ -750,6 +813,7 @@ static struct i2c_driver tca6507_driver = {
> .driver = {
> .name = "leds-tca6507",
> .owner = THIS_MODULE,
> + .of_match_table = of_tca6507_leds_match,
> },
> .probe = tca6507_probe,
> .remove = __devexit_p(tca6507_remove),
> --
> 1.7.9.5
>
More information about the devicetree-discuss
mailing list