[PATCH v8 3/3] ARM: EXYNOS: Enabling samsung-usbphy driver for EXYNOS4210
Praveen Paneri
p.paneri at samsung.com
Wed Nov 14 21:45:38 EST 2012
Adding usbphy node for Exynos4210 along with the platform data.
Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
---
arch/arm/boot/dts/exynos4210-smdkv310.dts | 5 +++++
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/include/mach/map.h | 1 +
arch/arm/mach-exynos/mach-exynos4-dt.c | 8 ++++++++
arch/arm/mach-exynos/setup-usb-phy.c | 13 +++++++++++++
5 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9b23a82..550903a 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -59,6 +59,11 @@
status = "okay";
};
+ usbphy at 125B0000 {
+ compatible = "samsung,exynos4210-usbphy";
+ reg = <0x125B0000 0x100>;
+ };
+
keypad at 100A0000 {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index bb3b09a..315308c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT
select PINCTRL
select PINCTRL_EXYNOS4
select USE_OF
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index ef4958b..e64fe1c 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -244,6 +244,7 @@
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG
+#define S3C_PA_USB_PHY EXYNOS4_PA_HSPHY
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 8858068..f7887e5 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -13,6 +13,7 @@
#include <linux/of_platform.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/samsung-usbphy.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -20,9 +21,14 @@
#include <plat/cpu.h>
#include <plat/regs-serial.h>
+#include <plat/usb-phy.h>
#include "common.h"
+static struct samsung_usbphy_data exynos4_usbphy_pdata = {
+ .pmu_isolation = s5p_usb_phy_pmu_isolation,
+};
+
/*
* The following lookup table is used to override device names when devices
* are registered from device tree. This is temporarily added to enable
@@ -79,6 +85,8 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
"exynos-tmu", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-usbphy", EXYNOS4_PA_HSPHY,
+ "s3c-usbphy", &exynos4_usbphy_pdata),
{},
};
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index b81cc56..1c62d20 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -221,3 +221,16 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL;
}
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+ if (on) {
+ writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+ & ~S5P_USBDEVICE_PHY_ENABLE,
+ S5P_USBDEVICE_PHY_CONTROL);
+ } else {
+ writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+ | S5P_USBDEVICE_PHY_ENABLE,
+ S5P_USBDEVICE_PHY_CONTROL);
+ }
+}
--
1.7.1
More information about the devicetree-discuss
mailing list