[PATCH v7 5/8] fbmon: add videomode helpers

Steffen Trumtrar s.trumtrar at pengutronix.de
Sat Nov 10 06:31:33 EST 2012


Hi!

On Fri, Nov 09, 2012 at 04:54:16PM +0000, Manjunathappa, Prakash wrote:
> Hi Steffen,
> 
> On Fri, Nov 09, 2012 at 02:55:45, Steffen Trumtrar wrote:
> > Hi!
> > 
> > On Wed, Oct 31, 2012 at 03:30:03PM +0000, Manjunathappa, Prakash wrote:
> > > Hi Steffen,
> > > 
> > > On Wed, Oct 31, 2012 at 14:58:05, Steffen Trumtrar wrote:
> > > > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > > > +int videomode_to_fb_videomode(struct videomode *vm, struct fb_videomode *fbmode)
> > > > +{
> > > > +	fbmode->xres = vm->hactive;
> > > > +	fbmode->left_margin = vm->hback_porch;
> > > > +	fbmode->right_margin = vm->hfront_porch;
> > > > +	fbmode->hsync_len = vm->hsync_len;
> > > > +
> > > > +	fbmode->yres = vm->vactive;
> > > > +	fbmode->upper_margin = vm->vback_porch;
> > > > +	fbmode->lower_margin = vm->vfront_porch;
> > > > +	fbmode->vsync_len = vm->vsync_len;
> > > > +
> > > > +	fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> > > > +
> > > > +	fbmode->sync = 0;
> > > > +	fbmode->vmode = 0;
> > > > +	if (vm->hah)
> > > > +		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> > > > +	if (vm->vah)
> > > > +		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> > > > +	if (vm->interlaced)
> > > > +		fbmode->vmode |= FB_VMODE_INTERLACED;
> > > > +	if (vm->doublescan)
> > > > +		fbmode->vmode |= FB_VMODE_DOUBLE;
> > > > +
> > > 
> > > "pixelclk-inverted" property of the panel is not percolated fb_videomode.
> > > Please let me know if I am missing something.
> > > 
> > 
> > The next version is almost finished. Only thing I'm missing is this.
> > And I actually do not know which flag would represent an inverted pixelclock
> > in fb_videomode. Does anybody have any idea what I have to do here?
> > 
> > 	if (vm->pixelclk_pol)
> > 		fbmode->sync = ???
> > 
> > That's as far as I have come and I don't see a flag that seems right.
> > Is this even a valid property of fb_videomode?
> > 
> 
> Thanks for considering it, I see IMX addresses it as proprietary FB_SYNC_ flag.
> FB_SYNC_CLK_INVERT: arch/arm/plat-mxc/include/mach/mx3fb.h
> 

No problem. So, it seems this flag has to be set in some imx-specific
videomode_to_fb_videomode function. It is included in the
struct videomode, so that should be no problem. But it will not be
part of this series.

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


More information about the devicetree-discuss mailing list