[PATCH 4/8] ARM: zynq: dts: split up device tree

[Michal Simek]

2012/10/31 Josh Cartwright <josh.cartwright at ni.com>:
> The purpose of the created zynq-7000.dtsi file is to describe the
> hardware common to all Zynq 7000-based boards.  Also, get rid of the
> zynq-ep107 device tree, since it is not hardware anyone can purchase.
>
> Add a zc702 dts file based on the zynq-7000.dtsi.  Add it to the
> dts/Makefile so it is built with the 'dtbs' target.
>
> Signed-off-by: Josh Cartwright <josh.cartwright at ni.com>
> ---
>  arch/arm/boot/dts/Makefile                         |  1 +
>  .../boot/dts/{zynq-ep107.dts => zynq-7000.dtsi}    | 19 +++-----------
>  arch/arm/boot/dts/zynq-zc702.dts                   | 30 ++++++++++++++++++++++
>  arch/arm/mach-zynq/common.c                        |  3 ++-
>  4 files changed, 36 insertions(+), 17 deletions(-)
>  rename arch/arm/boot/dts/{zynq-ep107.dts => zynq-7000.dtsi} (79%)
>  create mode 100644 arch/arm/boot/dts/zynq-zc702.dts

Not going to apply this. We need to finish our discussion in
"[PATCH v4 1/5] zynq: use GIC device tree bindings" before.

Definitely I like idea to use "xlnx,zynq-7000" generic model name.

Thanks,
Michal