[PATCH 3/5] ARM: Exynos: add device tree support for MCT controller driver

Sylwester Nawrocki sylvester.nawrocki at gmail.com
Sun Nov 4 03:50:40 EST 2012


Hi Thomas,

On 11/03/2012 03:45 PM, Thomas Abraham wrote:
> Allow the MCT controller base address and interrupts to be obtained from
> device tree and remove unused static definitions of these. The non-dt support
> for Exynos5250 is removed but retained for Exynos4210 based platforms.
>
> Cc: Changhwan Youn<chaos.youn at samsung.com>
> Signed-off-by: Thomas Abraham<thomas.abraham at linaro.org>
> ---
>   .../bindings/timer/samsung,exynos4210-mct.txt      |   70 ++++++++++++++++++++
>   arch/arm/mach-exynos/include/mach/irqs.h           |    6 --
>   arch/arm/mach-exynos/mct.c                         |   42 ++++++++----
>   3 files changed, 99 insertions(+), 19 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
>
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> new file mode 100644
> index 0000000..c53fd93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> @@ -0,0 +1,70 @@
> +Samsung's Multi Core Timer (MCT)
> +
> +The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> +global timer and CPU local timers. The global timer is a 64-bit free running
> +up-counter and can generate 4 interrupts when the counter reaches one of the
> +four preset counter values. The CPU local timers are 32-bit free running
> +down-counters and generates an interrupt when the counter expires. There is

s/generates/generate ?

> +one CPU local timer instantiated in MCT for every CPU in the system.
> +
> +Required properties:
> +
> +- compatible: should be "samsung,exynos4210-mct".
> +- reg: base address of the mct controller and length of the address space
> +  it occupies.
> +- interrupts: the list of interrupts generated by the controller. The following
> +  should be the order of the interrupts specified. The local timer interrupts
> +  should be specified after the four global timer interrupts have been
> +  specified.
> +
> +	0: Global Timer Interrupt 0
> +	1: Global Timer Interrupt 1
> +	2: Global Timer Interrupt 2
> +	3: Global Timer Interrupt 3
> +	4: Local Timer Interrupt 0
> +	5: Local Timer Interrupt 1
> +	6: ..
> +	7: ..
> +	i: Local Timer Interrupt n
> +
> +- samsung,mct-nr-local-irqs: The number of local timer interrupts supported
> +  by the MCT controller.
> +
> +Example 1: In this example, the system uses only the first global timer
> +	   interrupt generated by MCT and the remaining three global timer
> +	   interrupts are unused. Two local timer interrupts have been
> +	   specified.
> +
> +	mct at 10050000 {
> +		compatible = "samsung,exynos4210-mct";
> +		reg =<0x10050000 0x800>;
> +		interrupts =<0 57 0>,<0 0 0>,<0 0 0>,<0 0 0>,
> +			<0 42 0>,<0 48 0>;
> +		samsung,mct-nr-local-irqs =<4>;

Then this means the MCT supports 4 local interrupts but only 2 are
specified here ? Doesn't the code below expect

	samsung,mct-nr-local-irqs = <2>;

in this case ? Or should interrupts really be

	interrupts =<0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
		<0 42 0>, <0 48 0>, <0 0 0>, <0 0 0>;
?
> +	};
> +
> +Example 2: In this example, the MCT global and local timer interrupts are
> +	   connected to two seperate interrupt controllers. Hence, an
> +	   interrupt-map is created to map the interrupts to the respective
> +	   interrupt controllers.
> +
> +	mct at 101C0000 {
> +		compatible = "samsung,exynos4210-mct";
> +		reg =<0x101C0000 0x800>;
> +		interrupt-controller;
> +		#interrups-cells =<2>;
> +		interrupt-parent =<&mct_map>;
> +		interrupts =<0 0>,<1 0>,<2 0>,<3 0>,
> +			<4 0>,<5 0>;
> +		samsung,mct-nr-local-irqs =<2>;

Here the samsung,mct-nr-local-irqs' value matches what's specified in 
the interrupts property.

> +
> +		mct_map: mct-map {
> +			compatible = "samsung,mct-map";

Do we need a compatible property in sub-nodes like this one ?
Wouldn't it be sufficient to reference this node, for example by name ?

> +			#interrupt-cells =<2>;
> +			#address-cells =<0>;
> +			#size-cells =<0>;
> +			interrupt-map =<0x0 0&combiner 23 3>,
> +					<0x4 0&gic 0 120 0>,
> +					<0x5 0&gic 0 121 0>;
> +		};
> +	};
> diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
> index 6da3115..03c9f04 100644
> --- a/arch/arm/mach-exynos/include/mach/irqs.h
> +++ b/arch/arm/mach-exynos/include/mach/irqs.h
> @@ -30,8 +30,6 @@
>
>   /* For EXYNOS4 and EXYNOS5 */
>
> -#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
> -
>   #define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)
>
>   /* For EXYNOS4 SoCs */
> @@ -320,8 +318,6 @@
>   #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
>   #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
>
> -#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
> -#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
>   #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
>   #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
>   #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
> @@ -411,8 +407,6 @@
>   #define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
>
>   #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
> -#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
> -#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
>
>   #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
>   #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
> diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
> index d65d0c7..f7792b8 100644
> --- a/arch/arm/mach-exynos/mct.c
> +++ b/arch/arm/mach-exynos/mct.c
> @@ -19,6 +19,9 @@
>   #include<linux/platform_device.h>
>   #include<linux/delay.h>
>   #include<linux/percpu.h>
> +#include<linux/of.h>
> +#include<linux/of_irq.h>
> +#include<linux/of_address.h>
>
>   #include<asm/hardware/gic.h>
>   #include<asm/localtimer.h>
> @@ -483,14 +486,16 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
>   };
>   #endif /* CONFIG_LOCAL_TIMERS */
>
> -static void __init exynos4_timer_resources(void)
> +static void __init exynos4_timer_resources(struct device_node *np)
>   {
>   	struct clk *mct_clk;
>   	mct_clk = clk_get(NULL, "xtal");
>
>   	clk_rate = clk_get_rate(mct_clk);
>
> -	reg_base = S5P_VA_SYSTIMER;
> +	reg_base = (np) ? of_iomap(np, 0) : S5P_VA_SYSTIMER;

nit: Parentheses around np look redundant.

> +	if (!reg_base)
> +		panic("%s: unable to ioremap mct address space\n", __func__);

How about adding a line like:

#define pr_fmt(fmt) "%s: " fmt, __func__

on top of this file and dropping "%s: " and __func__ in those panic() 
calls ? It would make the logs more consistent across whole file.

>   #ifdef CONFIG_LOCAL_TIMERS
>   	if (mct_int_type == MCT_INT_PPI) {
> @@ -509,23 +514,34 @@ static void __init exynos4_timer_resources(void)
>
>   static void __init exynos4_timer_init(void)
>   {
> -	if (soc_is_exynos4210()) {
> +	struct device_node *np;
> +	u32 nr_irqs, i;
> +
> +	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-mct");
> +	if (np) {
> +		if (of_machine_is_compatible("samsung,exynos4210") ||
> +			of_machine_is_compatible("samsung,exynos5250"))
> +			mct_int_type = MCT_INT_SPI;
> +		else
> +			mct_int_type = MCT_INT_PPI;

Does it make sense to specify this mct_int_type as a property of
the mct node ?

> +
> +		if (of_property_read_u32(np, "samsung,mct-nr-local-irqs",
> +						&nr_irqs))
> +			panic("%s: number of local irqs not specified\n",
> +						__func__);
> +
> +		mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
> +		for (i = 0; i<  nr_irqs; i++)
> +			mct_irqs[MCT_L0_IRQ + i] =
> +				irq_of_parse_and_map(np, MCT_L0_IRQ + i);
> +	} else if (soc_is_exynos4210()) {
>   		mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
>   		mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
>   		mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
>   		mct_int_type = MCT_INT_SPI;
> -	} else if (soc_is_exynos5250()) {
> -		mct_irqs[MCT_G0_IRQ] = EXYNOS5_IRQ_MCT_G0;
> -		mct_irqs[MCT_L0_IRQ] = EXYNOS5_IRQ_MCT_L0;
> -		mct_irqs[MCT_L1_IRQ] = EXYNOS5_IRQ_MCT_L1;
> -		mct_int_type = MCT_INT_SPI;
> -	} else {
> -		mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
> -		mct_irqs[MCT_L0_IRQ] = EXYNOS_IRQ_MCT_LOCALTIMER;
> -		mct_int_type = MCT_INT_PPI;
>   	}
>
> -	exynos4_timer_resources();
> +	exynos4_timer_resources(np);
>   	exynos4_clocksource_init();
>   	exynos4_clockevent_init();
>   }

--

Regards,
Sylwester


More information about the devicetree-discuss mailing list