[PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
thomas.abraham at linaro.org
Wed May 2 15:07:40 EST 2012
Some platforms allow for clock gating and control of bus interface unit clock
and card interface unit clock. Add support for clock lookup of optional biu
and ciu clocks for clock gating and clock speed determination.
Signed-off-by: Abhilash Kesavan <a.kesavan at samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
drivers/mmc/host/dw_mmc.c | 35 +++++++++++++++++++++++++++++++----
include/linux/mmc/dw_mmc.h | 4 ++++
2 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 1532357..036846f 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1938,19 +1938,35 @@ int dw_mci_probe(struct dw_mci *host)
return -ENODEV;
}
- if (!host->pdata->bus_hz) {
+ host->biu_clk = clk_get(&host->dev, "biu");
+ if (IS_ERR(host->biu_clk))
+ dev_info(&host->dev, "biu clock not available\n");
+ else
+ clk_enable(host->biu_clk);
+
+ host->ciu_clk = clk_get(&host->dev, "ciu");
+ if (IS_ERR(host->ciu_clk))
+ dev_info(&host->dev, "ciu clock not available\n");
+ else
+ clk_enable(host->ciu_clk);
+
+ if (IS_ERR(host->ciu_clk))
+ host->bus_hz = host->pdata->bus_hz;
+ else
+ host->bus_hz = clk_get_rate(host->ciu_clk);
+
+ if (!host->bus_hz) {
dev_err(&host->dev,
"Platform data must supply bus speed\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_clk;
}
- host->bus_hz = host->pdata->bus_hz;
host->quirks = host->pdata->quirks;
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
-
host->dma_ops = host->pdata->dma_ops;
dw_mci_init_dma(host);
@@ -2095,6 +2111,13 @@ err_dmaunmap:
regulator_disable(host->vmmc);
regulator_put(host->vmmc);
}
+ kfree(host);
+
+err_clk:
+ clk_disable(host->ciu_clk);
+ clk_disable(host->biu_clk);
+ clk_put(host->ciu_clk);
+ clk_put(host->biu_clk);
return ret;
}
EXPORT_SYMBOL(dw_mci_probe);
@@ -2128,6 +2151,10 @@ void dw_mci_remove(struct dw_mci *host)
regulator_put(host->vmmc);
}
+ clk_disable(host->ciu_clk);
+ clk_disable(host->biu_clk);
+ clk_put(host->ciu_clk);
+ clk_put(host->biu_clk);
}
EXPORT_SYMBOL(dw_mci_remove);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 7a7ebd3..fa9a139 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -78,6 +78,8 @@ struct mmc_data;
* @data_offset: Set the offset of DATA register according to VERID.
* @dev: Device associated with the MMC controller.
* @pdata: Platform data associated with the MMC controller.
+ * @biu_clk: Pointer to bus interface unit clock instance.
+ * @ciu_clk: Pointer to card interface unit clock instance.
* @slot: Slots sharing this MMC controller.
* @fifo_depth: depth of FIFO.
* @data_shift: log2 of FIFO item size.
@@ -158,6 +160,8 @@ struct dw_mci {
u16 data_offset;
struct device dev;
struct dw_mci_board *pdata;
+ struct clk *biu_clk;
+ struct clk *ciu_clk;
struct dw_mci_slot *slot[MAX_MCI_SLOTS];
/* FIFO push and pull */
--
1.7.5.4
More information about the devicetree-discuss
mailing list