[PATCH V3 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
Viresh Kumar
viresh.kumar at st.com
Thu Mar 29 21:41:03 EST 2012
This patch adds a generic target for SPEAr3xx machines that can be configured
via the device-tree. Currently the following devices are supported via the
devicetree:
- VIC interrupts
- PL011 UART
- PL061 GPIO
- PL110 CLCD
- SP805 WDT
- Synopsys DW I2C
- Synopsys DW ethernet
- ST FSMC-NAND
- ST SPEAR-SMI
- ST SPEAR-KEYBOARD
- ST SPEAR-RTC
- ARASAN SDHCI-SPEAR
- SPEAR-EHCI
- SPEAR-OHCI
Other peripheral devices will follow in later patches.
This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of
4K for individual peripherals. This is done to have efficient TLB lookup for any
I/O windows that are located closely together. ioremap() on this range will
return this mapping only instead of creating another.
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
Documentation/arm/SPEAr/overview.txt | 13 +-
Documentation/devicetree/bindings/arm/spear.txt | 18 +++
arch/arm/boot/dts/spear300-evb.dts | 179 +++++++++++++++++++++++
arch/arm/boot/dts/spear300.dtsi | 72 +++++++++
arch/arm/boot/dts/spear310-evb.dts | 107 ++++++++++++++
arch/arm/boot/dts/spear310.dtsi | 75 ++++++++++
arch/arm/boot/dts/spear320-evb.dts | 108 ++++++++++++++
arch/arm/boot/dts/spear320.dtsi | 90 ++++++++++++
arch/arm/boot/dts/spear3xx.dtsi | 136 +++++++++++++++++
arch/arm/mach-spear3xx/Kconfig | 34 +----
arch/arm/mach-spear3xx/Makefile | 13 +--
arch/arm/mach-spear3xx/Makefile.boot | 4 +
arch/arm/mach-spear3xx/clock.c | 103 ++++++++------
arch/arm/mach-spear3xx/include/mach/generic.h | 29 +---
arch/arm/mach-spear3xx/include/mach/hardware.h | 3 -
arch/arm/mach-spear3xx/include/mach/spear.h | 9 +-
arch/arm/mach-spear3xx/spear300.c | 97 +++++++++----
arch/arm/mach-spear3xx/spear300_evb.c | 75 ----------
arch/arm/mach-spear3xx/spear310.c | 126 ++++++++++++++---
arch/arm/mach-spear3xx/spear310_evb.c | 81 ----------
arch/arm/mach-spear3xx/spear320.c | 127 ++++++++++++++---
arch/arm/mach-spear3xx/spear320_evb.c | 79 ----------
arch/arm/mach-spear3xx/spear3xx.c | 127 ++++++++---------
arch/arm/plat-spear/Kconfig | 3 +-
24 files changed, 1222 insertions(+), 486 deletions(-)
create mode 100644 arch/arm/boot/dts/spear300-evb.dts
create mode 100644 arch/arm/boot/dts/spear300.dtsi
create mode 100644 arch/arm/boot/dts/spear310-evb.dts
create mode 100644 arch/arm/boot/dts/spear310.dtsi
create mode 100644 arch/arm/boot/dts/spear320-evb.dts
create mode 100644 arch/arm/boot/dts/spear320.dtsi
create mode 100644 arch/arm/boot/dts/spear3xx.dtsi
delete mode 100644 arch/arm/mach-spear3xx/spear300_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear310_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear320_evb.c
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 253a35c..28a9af9 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -17,14 +17,14 @@ Introduction
SPEAr (Platform)
- SPEAr3XX (3XX SOC series, based on ARM9)
- SPEAr300 (SOC)
- - SPEAr300_EVB (Evaluation Board)
+ - SPEAr300 Evaluation Board
- SPEAr310 (SOC)
- - SPEAr310_EVB (Evaluation Board)
+ - SPEAr310 Evaluation Board
- SPEAr320 (SOC)
- - SPEAr320_EVB (Evaluation Board)
+ - SPEAr320 Evaluation Board
- SPEAr6XX (6XX SOC series, based on ARM9)
- SPEAr600 (SOC)
- - SPEAr600_EVB (Evaluation Board)
+ - SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
@@ -51,10 +51,11 @@ Introduction
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
- mach-spear* also contains board specific files for each machine type.
+ mach-spear* doesn't contains board specific files as they fully support
+ Flattened Device Tree.
Document Author
---------------
- Viresh Kumar, (c) 2010 ST Microelectronics
+ Viresh Kumar <viresh.kumar at st.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index f8e54f0..aa5f355 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
new file mode 100644
index 0000000..f2ee991
--- /dev/null
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -0,0 +1,179 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+ model = "ST SPEAr300 Evaluation Board";
+ compatible = "st,spear300-evb", "st,spear300";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ clcd at 60000000 {
+ status = "okay";
+ };
+
+ fsmc: flash at 94000000 {
+ status = "okay";
+ };
+
+ gmac: eth at e0800000 {
+ status = "okay";
+ };
+
+ sdhci at 70000000 {
+ int-gpio = <&gpio1 0 0>;
+ power-gpio = <&gpio1 2 1>;
+ status = "okay";
+ };
+
+ smi: flash at fc000000 {
+ status = "okay";
+ };
+
+ spi0: spi at d0100000 {
+ status = "okay";
+ };
+
+ ehci at e1800000 {
+ status = "okay";
+ };
+
+ ohci at e1900000 {
+ status = "okay";
+ };
+
+ ohci at e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio at fc980000 {
+ status = "okay";
+ };
+
+ gpio1: gpio at a9000000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at d0180000 {
+ status = "okay";
+ };
+
+ kbd at a0000000 {
+ linux,keymap = < 0x00010000
+ 0x00020100
+ 0x00030200
+ 0x00040300
+ 0x00050400
+ 0x00060500
+ 0x00070600
+ 0x00080700
+ 0x00090800
+ 0x000a0001
+ 0x000c0101
+ 0x000d0201
+ 0x000e0301
+ 0x000f0401
+ 0x00100501
+ 0x00110601
+ 0x00120701
+ 0x00130801
+ 0x00140002
+ 0x00150102
+ 0x00160202
+ 0x00170302
+ 0x00180402
+ 0x00190502
+ 0x001a0602
+ 0x001b0702
+ 0x001c0802
+ 0x001d0003
+ 0x001e0103
+ 0x001f0203
+ 0x00200303
+ 0x00210403
+ 0x00220503
+ 0x00230603
+ 0x00240703
+ 0x00250803
+ 0x00260004
+ 0x00270104
+ 0x00280204
+ 0x00290304
+ 0x002a0404
+ 0x002b0504
+ 0x002c0604
+ 0x002d0704
+ 0x002e0804
+ 0x002f0005
+ 0x00300105
+ 0x00310205
+ 0x00320305
+ 0x00330405
+ 0x00340505
+ 0x00350605
+ 0x00360705
+ 0x00370805
+ 0x00380006
+ 0x00390106
+ 0x003a0206
+ 0x003b0306
+ 0x003c0406
+ 0x003d0506
+ 0x003e0606
+ 0x003f0706
+ 0x00400806
+ 0x00410007
+ 0x00420107
+ 0x00430207
+ 0x00440307
+ 0x00450407
+ 0x00460507
+ 0x00470607
+ 0x00480707
+ 0x00490807
+ 0x004a0008
+ 0x004b0108
+ 0x004c0208
+ 0x004d0308
+ 0x004e0408
+ 0x004f0508
+ 0x00500608
+ 0x00510708
+ 0x00520808 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc at fc900000 {
+ status = "okay";
+ };
+
+ serial at d0000000 {
+ status = "okay";
+ };
+
+ wdt at fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
new file mode 100644
index 0000000..f9fcbf4
--- /dev/null
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -0,0 +1,72 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x60000000 0x60000000 0x50000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ clcd at 60000000 {
+ compatible = "arm,clcd-pl110", "arm,primecell";
+ reg = <0x60000000 0x1000>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+
+ fsmc: flash at 94000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x94000000 0x1000 /* FSMC Register */
+ 0x80000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ sdhci at 70000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0x70000000 0x100>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xa0000000 0xa0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ gpio1: gpio at a9000000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xa9000000 0x1000>;
+ status = "disabled";
+ };
+
+ kbd at a0000000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xa0000000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
new file mode 100644
index 0000000..ec19d7b
--- /dev/null
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -0,0 +1,107 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+ model = "ST SPEAr310 Evaluation Board";
+ compatible = "st,spear310-evb", "st,spear310";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ fsmc: flash at 44000000 {
+ status = "okay";
+ };
+
+ gmac: eth at e0800000 {
+ status = "okay";
+ };
+
+ smi: flash at fc000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash at f8000000 {
+ label = "m25p64";
+ reg = <0xf8000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ st,smi-fast-mode;
+ };
+ };
+
+ spi0: spi at d0100000 {
+ status = "okay";
+ };
+
+ ehci at e1800000 {
+ status = "okay";
+ };
+
+ ohci at e1900000 {
+ status = "okay";
+ };
+
+ ohci at e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio at fc980000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at d0180000 {
+ status = "okay";
+ };
+
+ rtc at fc900000 {
+ status = "okay";
+ };
+
+ serial at d0000000 {
+ status = "okay";
+ };
+
+ serial at b2000000 {
+ status = "okay";
+ };
+
+ serial at b2080000 {
+ status = "okay";
+ };
+
+ serial at b2100000 {
+ status = "okay";
+ };
+
+ serial at b2180000 {
+ status = "okay";
+ };
+
+ serial at b2200000 {
+ status = "okay";
+ };
+
+ wdt at fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
new file mode 100644
index 0000000..dc7fa14
--- /dev/null
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -0,0 +1,75 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x40000000 0x40000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ fsmc: flash at 44000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x44000000 0x1000 /* FSMC Register */
+ 0x40000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x10000>;
+ st,cle-off = <0x20000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ serial at b2000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at b2080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2080000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at b2100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2100000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at b2180000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2180000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at b2200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb2200000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
new file mode 100644
index 0000000..5681a97
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -0,0 +1,108 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+ model = "ST SPEAr300 Evaluation Board";
+ compatible = "st,spear300-evb", "st,spear300";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ clcd at 90000000 {
+ status = "okay";
+ };
+
+ fsmc: flash at 4c000000 {
+ status = "okay";
+ };
+
+ gmac: eth at e0800000 {
+ status = "okay";
+ };
+
+ sdhci at 70000000 {
+ power-gpio = <&gpio0 2 1>;
+ power_always_enb;
+ status = "okay";
+ };
+
+ smi: flash at fc000000 {
+ status = "okay";
+ };
+
+ spi0: spi at d0100000 {
+ status = "okay";
+ };
+
+ spi1: spi at a5000000 {
+ status = "okay";
+ };
+
+ spi2: spi at a6000000 {
+ status = "okay";
+ };
+
+ ehci at e1800000 {
+ status = "okay";
+ };
+
+ ohci at e1900000 {
+ status = "okay";
+ };
+
+ ohci at e2100000 {
+ status = "okay";
+ };
+
+ apb {
+ gpio0: gpio at fc980000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at d0180000 {
+ status = "okay";
+ };
+
+ i2c1: i2c at a7000000 {
+ status = "okay";
+ };
+
+ rtc at fc900000 {
+ status = "okay";
+ };
+
+ serial at d0000000 {
+ status = "okay";
+ };
+
+ serial at a3000000 {
+ status = "okay";
+ };
+
+ serial at a4000000 {
+ status = "okay";
+ };
+
+ wdt at fc880000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
new file mode 100644
index 0000000..9a0267a
--- /dev/null
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -0,0 +1,90 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x40000000 0x40000000 0x70000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ clcd at 90000000 {
+ compatible = "arm,clcd-pl110", "arm,primecell";
+ reg = <0x90000000 0x1000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ fsmc: flash at 4c000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x4c000000 0x1000 /* FSMC Register */
+ 0x50000000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ sdhci at 70000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0x70000000 0x100>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ spi1: spi at a5000000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xa5000000 0x1000>;
+ status = "disabled";
+ };
+
+ spi2: spi at a6000000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xa6000000 0x1000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xa0000000 0xa0000000 0x10000000
+ 0xd0000000 0xd0000000 0x30000000>;
+
+ i2c1: i2c at a7000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xa7000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at a3000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xa3000000 0x1000>;
+ status = "disabled";
+ };
+
+ serial at a4000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xa4000000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
new file mode 100644
index 0000000..924a6f6
--- /dev/null
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -0,0 +1,136 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&vic>;
+
+ cpus {
+ cpu at 0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ vic: interrupt-controller at f1100000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xf1100000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ gmac: eth at e0800000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupts = <23 22>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ status = "disabled";
+ };
+
+ smi: flash at fc000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xfc000000 0x1000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ spi0: spi at d0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xd0100000 0x1000>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ ehci at e1800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe1800000 0x1000>;
+ interrupts = <26>;
+ status = "disabled";
+ };
+
+ ohci at e1900000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe1900000 0x1000>;
+ interrupts = <25>;
+ status = "disabled";
+ };
+
+ ohci at e2100000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe2100000 0x1000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ gpio0: gpio at fc980000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc980000 0x1000>;
+ interrupts = <11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at d0180000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xd0180000 0x1000>;
+ interrupts = <21>;
+ status = "disabled";
+ };
+
+ rtc at fc900000 {
+ compatible = "st,spear-rtc";
+ reg = <0xfc900000 0x1000>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ serial at d0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xd0000000 0x1000>;
+ interrupts = <19>;
+ status = "disabled";
+ };
+
+ wdt at fc880000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0xfc880000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
index 2cee6b0..d9fe11c 100644
--- a/arch/arm/mach-spear3xx/Kconfig
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -5,39 +5,19 @@
if ARCH_SPEAR3XX
menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
- bool "SPEAr300 Evaluation Board"
- select MACH_SPEAR300
- help
- Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
- bool "SPEAr310 Evaluation Board"
- select MACH_SPEAR310
- help
- Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
- bool "SPEAr320 Evaluation Board"
- select MACH_SPEAR320
- help
- Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
config MACH_SPEAR300
- bool "SPEAr300"
+ bool "SPEAr300 Machine support with Device Tree"
help
- Supports ST SPEAr300 Machine
+ Supports ST SPEAr300 machine configured via the device-tree
config MACH_SPEAR310
- bool "SPEAr310"
+ bool "SPEAr310 Machine support with Device Tree"
help
- Supports ST SPEAr310 Machine
+ Supports ST SPEAr310 machine configured via the device-tree
config MACH_SPEAR320
- bool "SPEAr320"
+ bool "SPEAr320 Machine support with Device Tree"
help
- Supports ST SPEAr320 Machine
-
+ Supports ST SPEAr320 machine configured via the device-tree
+endmenu
endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b248624..17b5d83 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,24 +3,13 @@
#
# common files
-obj-y += spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
# spear310 specific files
obj-$(CONFIG_MACH_SPEAR310) += spear310.o
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
# spear320 specific files
obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index 4674a4c..d93e217 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,3 +1,7 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 47d4535..9293c14 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of_platform.h>
#include <asm/mach-types.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
@@ -673,11 +674,11 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
/* clock derived from 32 KHz osc clk */
- CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
+ CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
/* clock derived from 24 MHz osc clk */
CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
- CLKDEV_INIT("wdt", NULL, &wdt_clk),
+ CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
/* clock derived from pll1 clk */
CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
@@ -686,7 +687,7 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
- CLKDEV_INIT("uart", NULL, &uart_clk),
+ CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
CLKDEV_INIT("firda", NULL, &firda_clk),
CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
@@ -699,81 +700,95 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
/* clock derived from ahb clk */
CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
- CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk),
+ CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
CLKDEV_INIT("dma", NULL, &dma_clk),
CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
- CLKDEV_INIT("gmac", NULL, &gmac_clk),
- CLKDEV_INIT("smi", NULL, &smi_clk),
+ CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
+ CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
CLKDEV_INIT("c3", NULL, &c3_clk),
/* clock derived from apb clk */
CLKDEV_INIT("adc", NULL, &adc_clk),
- CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
- CLKDEV_INIT("gpio", NULL, &gpio_clk),
+ CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
+ CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
};
/* array of all spear 300 clock lookups */
#ifdef CONFIG_MACH_SPEAR300
static struct clk_lookup spear300_clk_lookups[] = {
- CLKDEV_INIT("clcd", NULL, &clcd_clk),
- CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
- CLKDEV_INIT("gpio1", NULL, &gpio1_clk),
- CLKDEV_INIT("keyboard", NULL, &kbd_clk),
- CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
+ CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
+ CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
+ CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
+ CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
+ CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
};
+
+void __init spear300_clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(&spear_clk_lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
+ clk_register(&spear300_clk_lookups[i]);
+
+ clk_init();
+}
#endif
/* array of all spear 310 clock lookups */
#ifdef CONFIG_MACH_SPEAR310
static struct clk_lookup spear310_clk_lookups[] = {
- CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
+ CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
CLKDEV_INIT(NULL, "emi", &emi_clk),
- CLKDEV_INIT("uart1", NULL, &uart1_clk),
- CLKDEV_INIT("uart2", NULL, &uart2_clk),
- CLKDEV_INIT("uart3", NULL, &uart3_clk),
- CLKDEV_INIT("uart4", NULL, &uart4_clk),
- CLKDEV_INIT("uart5", NULL, &uart5_clk),
+ CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
+ CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
+ CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
+ CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
+ CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
};
+
+void __init spear310_clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(&spear_clk_lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
+ clk_register(&spear310_clk_lookups[i]);
+
+ clk_init();
+}
#endif
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
static struct clk_lookup spear320_clk_lookups[] = {
- CLKDEV_INIT("clcd", NULL, &clcd_clk),
- CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
- CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk),
+ CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
+ CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
+ CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
CLKDEV_INIT(NULL, "emi", &emi_clk),
CLKDEV_INIT("pwm", NULL, &pwm_clk),
- CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
+ CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
- CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
- CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
- CLKDEV_INIT("uart1", NULL, &uart1_clk),
- CLKDEV_INIT("uart2", NULL, &uart2_clk),
+ CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
+ CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
+ CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
+ CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
};
-#endif
-void __init spear3xx_clk_init(void)
+void __init spear320_clk_init(void)
{
- int i, cnt;
- struct clk_lookup *lookups;
-
- if (machine_is_spear300()) {
- cnt = ARRAY_SIZE(spear300_clk_lookups);
- lookups = spear300_clk_lookups;
- } else if (machine_is_spear310()) {
- cnt = ARRAY_SIZE(spear310_clk_lookups);
- lookups = spear310_clk_lookups;
- } else {
- cnt = ARRAY_SIZE(spear320_clk_lookups);
- lookups = spear320_clk_lookups;
- }
+ int i;
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
- for (i = 0; i < cnt; i++)
- clk_register(&lookups[i]);
+ for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
+ clk_register(&spear320_clk_lookups[i]);
clk_init();
}
+#endif
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5..84ee2bb 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -31,16 +31,13 @@
#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
/* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
/* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
@@ -99,9 +96,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
/* pad mux modes */
extern struct pmx_mode spear300_nand_mode;
extern struct pmx_mode spear300_nor_mode;
@@ -133,16 +127,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
extern struct pmx_dev spear300_pmx_gpio1;
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear300 machine declarations here */
+void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
/* pad mux devices */
extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
extern struct pmx_dev spear310_pmx_emi_cs_2_3;
@@ -153,16 +144,13 @@ extern struct pmx_dev spear310_pmx_fsmc;
extern struct pmx_dev spear310_pmx_rs485_0_1;
extern struct pmx_dev spear310_pmx_tdm0;
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear310 machine declarations here */
+void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
/* pad mux modes */
extern struct pmx_mode spear320_auto_net_smii_mode;
extern struct pmx_mode spear320_auto_net_mii_mode;
@@ -193,9 +181,8 @@ extern struct pmx_dev spear320_pmx_smii0;
extern struct pmx_dev spear320_pmx_smii1;
extern struct pmx_dev spear320_pmx_i2c1;
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count);
+/* Add spear320 machine declarations here */
+void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4660c0d8..defa374 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -17,7 +17,4 @@
#include <plat/hardware.h>
#include <mach/spear.h>
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x) (x | 0xF0000000)
-
#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd983..8e3900a 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -25,8 +25,9 @@
/* ICM1 - Low speed connection */
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
+#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
@@ -53,11 +54,11 @@
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
/* ICM3 - Basic Subsystem */
#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
@@ -65,9 +66,9 @@
#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index adee72b..c876c6a 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -3,8 +3,8 @@
*
* SPEAr300 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar at st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -13,10 +13,9 @@
#define pr_fmt(fmt) "SPEAr300: " fmt
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
@@ -425,24 +424,35 @@ static struct spear_shirq shirq_ras1 = {
},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR300_GPIO1_INT_BASE,
+/* padmux devices to enable */
+static struct pmx_dev *spear300_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp_cs,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_mii,
+ &spear3xx_pmx_uart0,
+
+ /* spear300 specific devices */
+ &spear300_pmx_fsmc_2_chips,
+ &spear300_pmx_clcd,
+ &spear300_pmx_telecom_sdhci_4bit,
+ &spear300_pmx_gpio1,
};
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
- {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ {}
+};
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+static void __init spear300_dt_init(void)
{
- int ret = 0;
+ int ret = -EINVAL;
- /* call spear3xx family common init function */
- spear3xx_init();
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear300_auxdata_lookup, NULL);
/* shared irq registration */
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
@@ -452,18 +462,45 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ\n");
}
- /* pmx initialization */
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear300-evb")) {
+ /* pmx initialization */
+ pmx_driver.mode = &spear300_photo_frame_mode;
+ pmx_driver.devs = spear300_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
+
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
- if (pmx_driver.base) {
- ret = pmx_register(&pmx_driver);
if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- /* Free Mapping, device selection already done */
- iounmap(pmx_driver.base);
+ pr_err("Initialization Failed");
}
}
+
+static const char * const spear300_dt_board_compat[] = {
+ "st,spear300",
+ "st,spear300-evb",
+ NULL,
+};
+
+static void __init spear300_map_io(void)
+{
+ spear3xx_map_io();
+ spear300_clk_init();
+}
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+ .map_io = spear300_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear300_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear300_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
deleted file mode 100644
index 3462ab9..0000000
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp_cs,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear300 specific devices */
- &spear300_pmx_fsmc_2_chips,
- &spear300_pmx_clcd,
- &spear300_pmx_telecom_sdhci_4bit,
- &spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear300 specific devices */
- &spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
- unsigned int i;
-
- /* call spear300 machine init function */
- spear300_init(&spear300_photo_frame_mode, pmx_devs,
- ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear300_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index b7c2876..641fd4c 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -3,8 +3,8 @@
*
* SPEAr310 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar at st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -13,8 +13,11 @@
#define pr_fmt(fmt) "SPEAr310: " fmt
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
@@ -257,17 +260,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* Add spear310 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear310_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_gpio_pin0,
+ &spear3xx_pmx_gpio_pin1,
+ &spear3xx_pmx_gpio_pin2,
+ &spear3xx_pmx_gpio_pin3,
+ &spear3xx_pmx_gpio_pin4,
+ &spear3xx_pmx_gpio_pin5,
+ &spear3xx_pmx_uart0,
+
+ /* spear310 specific devices */
+ &spear310_pmx_emi_cs_0_1_4_5,
+ &spear310_pmx_emi_cs_2_3,
+ &spear310_pmx_uart1,
+ &spear310_pmx_uart2,
+ &spear310_pmx_uart3_4_5,
+ &spear310_pmx_fsmc,
+ &spear310_pmx_rs485_0_1,
+ &spear310_pmx_tdm0,
+};
+
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+ {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart1_tx",
+ .dma_rx_param = "uart1_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart2_tx",
+ .dma_rx_param = "uart2_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart3_tx",
+ .dma_rx_param = "uart3_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart4_tx",
+ .dma_rx_param = "uart4_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart5_tx",
+ .dma_rx_param = "uart5_rx",
+ },
+};
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+ &spear310_uart_data[0]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+ &spear310_uart_data[1]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+ &spear310_uart_data[2]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+ &spear310_uart_data[3]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+ &spear310_uart_data[4]),
+ {}
+};
+
+static void __init spear310_dt_init(void)
{
void __iomem *base;
int ret = 0;
- /* call spear3xx family common init function */
- spear3xx_init();
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear310_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -297,13 +362,38 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ 4\n");
}
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear310-evb")) {
+ /* pmx initialization */
+ pmx_driver.base = base;
+ pmx_driver.mode = NULL;
+ pmx_driver.devs = spear310_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n", ret);
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ }
}
+
+static const char * const spear310_dt_board_compat[] = {
+ "st,spear310",
+ "st,spear310-evb",
+ NULL,
+};
+
+static void __init spear310_map_io(void)
+{
+ spear3xx_map_io();
+ spear310_clk_init();
+}
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+ .map_io = spear310_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear310_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
deleted file mode 100644
index f92c499..0000000
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_gpio_pin0,
- &spear3xx_pmx_gpio_pin1,
- &spear3xx_pmx_gpio_pin2,
- &spear3xx_pmx_gpio_pin3,
- &spear3xx_pmx_gpio_pin4,
- &spear3xx_pmx_gpio_pin5,
- &spear3xx_pmx_uart0,
-
- /* spear310 specific devices */
- &spear310_pmx_emi_cs_0_1_4_5,
- &spear310_pmx_emi_cs_2_3,
- &spear310_pmx_uart1,
- &spear310_pmx_uart2,
- &spear310_pmx_uart3_4_5,
- &spear310_pmx_fsmc,
- &spear310_pmx_rs485_0_1,
- &spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
- unsigned int i;
-
- /* call spear310 machine init function */
- spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear310_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 7bd39c0..9c571d0 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -3,8 +3,8 @@
*
* SPEAr320 machine source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar at st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -13,8 +13,12 @@
#define pr_fmt(fmt) "SPEAr320: " fmt
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
@@ -510,17 +514,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* Add spear320 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear320_evb_pmx_devs[] = {
+ /* spear3xx specific devices */
+ &spear3xx_pmx_i2c,
+ &spear3xx_pmx_ssp,
+ &spear3xx_pmx_mii,
+ &spear3xx_pmx_uart0,
+
+ /* spear320 specific devices */
+ &spear320_pmx_fsmc,
+ &spear320_pmx_sdhci,
+ &spear320_pmx_i2s,
+ &spear320_pmx_uart1,
+ &spear320_pmx_uart2,
+ &spear320_pmx_can,
+ &spear320_pmx_pwm0,
+ &spear320_pmx_pwm1,
+ &spear320_pmx_pwm2,
+ &spear320_pmx_mii1,
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+ {
+ .bus_id = 1,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp1_tx",
+ .dma_rx_param = "ssp1_rx",
+ .num_chipselect = 2,
+ }, {
+ .bus_id = 2,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp2_tx",
+ .dma_rx_param = "ssp2_rx",
+ .num_chipselect = 2,
+ }
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+ {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart1_tx",
+ .dma_rx_param = "uart1_rx",
+ }, {
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "uart2_tx",
+ .dma_rx_param = "uart2_rx",
+ },
+};
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
- u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+ &pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+ &spear320_ssp_data[0]),
+ OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+ &spear320_ssp_data[1]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+ &spear320_uart_data[0]),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+ &spear320_uart_data[1]),
+ {}
+};
+
+static void __init spear320_dt_init(void)
{
void __iomem *base;
int ret = 0;
- /* call spear3xx family common init function */
- spear3xx_init();
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear320_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -544,13 +610,38 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ 4\n");
}
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = pmx_mode;
- pmx_driver.devs = pmx_devs;
- pmx_driver.devs_count = pmx_dev_count;
+ if (of_machine_is_compatible("st,spear320-evb")) {
+ /* pmx initialization */
+ pmx_driver.base = base;
+ pmx_driver.mode = &spear320_auto_net_mii_mode;
+ pmx_driver.devs = spear320_evb_pmx_devs;
+ pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n", ret);
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ pr_err("padmux: registration failed. err no: %d\n",
+ ret);
+ }
}
+
+static const char * const spear320_dt_board_compat[] = {
+ "st,spear320",
+ "st,spear320-evb",
+ NULL,
+};
+
+static void __init spear320_map_io(void)
+{
+ spear3xx_map_io();
+ spear320_clk_init();
+}
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+ .map_io = spear320_map_io,
+ .init_irq = spear3xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear3xx_timer,
+ .init_machine = spear320_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear320_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
deleted file mode 100644
index 105334a..0000000
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear320 specific devices */
- &spear320_pmx_fsmc,
- &spear320_pmx_sdhci,
- &spear320_pmx_i2s,
- &spear320_pmx_uart1,
- &spear320_pmx_uart2,
- &spear320_pmx_can,
- &spear320_pmx_pwm0,
- &spear320_pmx_pwm1,
- &spear320_pmx_pwm2,
- &spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- /* spear3xx specific devices */
- &spear3xx_gpio_device,
- &spear3xx_uart_device,
-
- /* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
- /* spear3xx specific devices */
-
- /* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
- unsigned int i;
-
- /* call spear320 machine init function */
- spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
- ARRAY_SIZE(pmx_devs));
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .atag_offset = 0x100,
- .map_io = spear3xx_map_io,
- .init_irq = spear3xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
- .init_machine = spear320_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index a236925..a94d8c1 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -3,8 +3,8 @@
*
* SPEAr3XX machines common source file
*
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar at st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -13,76 +13,14 @@
#define pr_fmt(fmt) "SPEAr3xx: " fmt
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/hardware.h>
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
- .gpio_base = 0,
- .irq_base = SPEAR3XX_GPIO_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
- {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
- {SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
- /* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
- vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
-struct map_desc spear3xx_io_desc[] __initdata = {
- {
- .virtual = VA_SPEAR3XX_ICM1_UART_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ML1_VIC_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- },
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
- iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
- /* This will initialize clock framework */
- spear3xx_clk_init();
-}
-
/* pad multiplexing support */
/* devices */
static struct pmx_dev_mode pmx_firda_modes[] = {
@@ -508,6 +446,51 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp0_tx",
+ .dma_rx_param = "ssp0_rx",
+ /*
+ * This is number of spi devices that can be connected to spi. There are
+ * two type of chipselects on which slave devices can work. One is chip
+ * select provided by spi masters other is controlled through external
+ * gpio's. We can't use chipselect provided from spi master (because as
+ * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+ * this number now depends on number of gpios available for spi. each
+ * slave on each master requires a separate gpio pin.
+ */
+ .num_chipselect = 2,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xD0000000 0xFD000000
+ * 0xFC000000 0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR3XX_ICM1_2_BASE,
+ .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+ iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
static void __init spear3xx_timer_init(void)
{
char pclk_name[] = "pll3_48m_clk";
@@ -538,3 +521,13 @@ static void __init spear3xx_timer_init(void)
struct sys_timer spear3xx_timer = {
.init = spear3xx_timer_init,
};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl190-vic", .data = vic_of_init, },
+ { /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+ of_irq_init(vic_of_match);
+}
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 1bb3dbc..6c066fc 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -9,9 +9,10 @@ choice
default ARCH_SPEAR3XX
config ARCH_SPEAR3XX
- bool "SPEAr3XX"
+ bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
+ select USE_OF
help
Supports for ARM's SPEAR3XX family
--
1.7.9
More information about the devicetree-discuss
mailing list