[PATCH] rtc/spear: Add Device Tree probing capability

[Stefan Roese]

On Monday 26 March 2012 11:54:22 Viresh Kumar wrote:
> SPEAr platforms now support DT and so must convert all drivers support DT.
> This patch adds DT probing support for rtc and updates its documentation
> too.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
> ---
>  Documentation/devicetree/bindings/rtc/spear-rtc.txt |   18
> ++++++++++++++++++ drivers/rtc/rtc-spear.c                             |  
> 10 ++++++++++ 2 files changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644
> index 0000000..928410f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> @@ -0,0 +1,18 @@
> +* SPEAr RTC
> +
> +Required properties:
> +- compatible : "st,spear-rtc"
> +- reg : Address range of the rtc registers
> +- interrupt-parent: Should be the phandle for the interrupt controller
> +  that services interrupts for this device
> +- interrupt: Should contain the rtc interrupt number
> +
> +Example:
> +
> +	rtc at fc000000 {
> +		compatible = "st,spear-rtc";

With Rob's comments in mind, wouldn't it be better to use a more specific 
compatible property? Should we stick with "st,spear600-rtc"? Or use "st-
spear300-rtc" as "oldest" SoC variant?

Thanks,
Stefan