[PATCH] mtd: spear-smi: Update compatible property

[Viresh Kumar]

SPEAr SMI controller version is same for all SPEAr machines. Thus we don't need
per machine compatible property in driver.

Thus this patch updates compatible entry to: "st,spear-smi", so that it
works for all SPEAr machines.

Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
 .../devicetree/bindings/mtd/spear_smi.txt          |    4 ++--
 drivers/mtd/devices/spear_smi.c                    |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
index 7248aad..80dfd96 100644
--- a/Documentation/devicetree/bindings/mtd/spear_smi.txt
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -1,7 +1,7 @@
 * SPEAr SMI
 
 Required properties:
-- compatible : "st,spear600-smi"
+- compatible : "st,spear-smi"
 - reg : Address range of the mtd chip
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
   representing partitions.
@@ -16,7 +16,7 @@ Optional properties:
 Example:
 
 	smi: flash at fc000000 {
-		compatible = "st,spear600-smi";
+		compatible = "st,spear-smi";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0xfc000000 0x1000>;
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index bebce11..f392594 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -1113,7 +1113,7 @@ int spear_smi_resume(struct platform_device *pdev)
 
 #ifdef CONFIG_OF
 static const struct of_device_id spear_smi_id_table[] = {
-	{ .compatible = "st,spear600-smi" },
+	{ .compatible = "st,spear-smi" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, spear_smi_id_table);
-- 
1.7.8.110.g4cb5d