[PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards
Stefan Roese
sr at denx.de
Thu Mar 15 06:01:58 EST 2012
On Wednesday 14 March 2012 18:24:35 Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > diff --git a/arch/arm/boot/dts/spear600-evb.dts
> > > > b/arch/arm/boot/dts/spear600-evb.dts new file mode 100644
> > > > index 0000000..cbfda8d
> > > > --- /dev/null
> > > > +++ b/arch/arm/boot/dts/spear600-evb.dts
> > > > @@ -0,0 +1,30 @@
> > > > +/*
> > > > + * Copyright 2012 Stefan Roese <sr at denx.de>
> > > > + *
> > > > + * The code contained herein is licensed under the GNU General
> > > > Public + * License. You may obtain a copy of the GNU General Public
> > > > License + * Version 2 or later at the following locations:
> > > > + *
> > > > + * http://www.opensource.org/licenses/gpl-license.html
> > > > + * http://www.gnu.org/copyleft/gpl.html
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +/include/ "spear600.dtsi"
> > > > +
> > > > +/ {
> > > > + model = "ST SPEAr600 Evaluation Board";
> > > > + compatible = "st,spear600-evb", "st,spear600";
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > >
> > > please put the mem size here
> >
> > Might I ask why? Other *.dtsi files don't have it either.
>
> do not expect the bootloader to put it. I t's not mandatory
But the memory node it is already present in spear600.dtsi (see below). Do we
really need to duplicate this in the board specific dts file?
> > > > +
> > > > + soc {
> > > > + gmac0: ethernet at e0800000 {
> > > > + phy-mode = "gmii";
> > > > + };
> > > > +
> > > > + i2c at d0200000 {
> > > > + clock-frequency = <400000>;
> > > > + };
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm/boot/dts/spear600.dtsi
> > > > b/arch/arm/boot/dts/spear600.dtsi new file mode 100644
> > > > index 0000000..e45e58f
> > > > --- /dev/null
> > > > +++ b/arch/arm/boot/dts/spear600.dtsi
> > > > @@ -0,0 +1,162 @@
> > > > +/*
> > > > + * Copyright 2012 Stefan Roese <sr at denx.de>
> > > > + *
> > > > + * The code contained herein is licensed under the GNU General
> > > > Public + * License. You may obtain a copy of the GNU General Public
> > > > License + * Version 2 or later at the following locations:
> > > > + *
> > > > + * http://www.opensource.org/licenses/gpl-license.html
> > > > + * http://www.gnu.org/copyleft/gpl.html
> > > > + */
> > > > +
> > > > +/include/ "skeleton.dtsi"
> > > > +
> > > > +/ {
> > > > + compatible = "st,spear600";
> > > > +
> > > > + cpus {
> > > > + cpu at 0 {
> > > > + compatible = "arm,arm926ejs";
> > > > + };
> > > > + };
> > > > +
> > > > + memory {
> > > > + device_type = "memory";
> > > > + reg = <0 0>; /* Filled by U-Boot */
> > >
> > > please put the max mem of the SoC here
> >
> > Why? It's always updated by the bootloader. And a max. mem size (when not
> > updated to the correct mem size by the bootloader) would crash the board
> > if it is equipped with less memory.
>
> yes but we descripbe the soc here and on the dts you reduce it
> Never expect the bootloader to update it.
Without update to real size we're doomed.
> It's a possibility not mandatory
Okay, I'll add the max. size here.
> > > > + };
> > > > +
> > > > + soc {
> > >
> > > please put the name of the bus not soc
> >
> > Okay.
> >
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + compatible = "simple-bus";
> > > > + ranges;
> > > > +
> > > > + vic0: interrupt-controller at f1100000 {
> > > > + compatible = "arm,pl190-vic";
> > > > + interrupt-controller;
> > > > + reg = <0xf1100000 0x1000>;
> > > > + #interrupt-cells = <1>;
> > > > + };
> > > > +
> > > > + vic1: interrupt-controller at f1000000 {
> > > > + compatible = "arm,pl190-vic";
> > > > + interrupt-controller;
> > > > + reg = <0xf1000000 0x1000>;
> > > > + #interrupt-cells = <1>;
> > > > + };
> > > > +
> > > > + serial at d0000000 {
> > > > + compatible = "arm,pl011", "arm,primecell";
> > > > + reg = <0xd0000000 0x1000>;
> > > > + interrupt-parent = <&vic0>;
> > > > + interrupts = <24>;
> > > > + };
> > > > +
> > > > + serial at d0080000 {
> > > > + compatible = "arm,pl011", "arm,primecell";
> > > > + reg = <0xd0080000 0x1000>;
> > > > + interrupt-parent = <&vic0>;
> > > > + interrupts = <25>;
> > > > + };
> > > > +
> > > > + /* local/cpu GPIO */
> > > > + gpio0: gpio at f0100000 {
> > > > + #gpio-cells = <2>;
> > > > + compatible = "arm,pl061", "arm,primecell";
> > > > + gpio-controller;
> > > > + reg = <0xf0100000 0x1000>;
> > > > + interrupt-parent = <&vic0>;
> > > > + interrupts = <18>;
> > > > + };
> > > > +
> > > > + /* basic GPIO */
> > > > + gpio1: gpio at fc980000 {
> > > > + #gpio-cells = <2>;
> > > > + compatible = "arm,pl061", "arm,primecell";
> > > > + gpio-controller;
> > > > + reg = <0xfc980000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <19>;
> > > > + };
> > > > +
> > > > + /* appl GPIO */
> > > > + gpio2: gpio at d8100000 {
> > > > + #gpio-cells = <2>;
> > > > + compatible = "arm,pl061", "arm,primecell";
> > > > + gpio-controller;
> > > > + reg = <0xd8100000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <4>;
> > > > + };
> > > > +
> > > > + gmac0: ethernet at e0800000 {
> > > > + compatible = "st,spear600-gmac";
> > > > + reg = <0xe0800000 0x8000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <24 23>;
> > > > + interrupt-names = "macirq", "eth_wake_irq";
> > > > + mac-address = [000000000000]; /* Filled in
by U-Boot
> >
> > */
>
> drop this no dummy data
Okay.
> > > > + };
> > > > +
> > > > + i2c at d0200000 {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > + compatible = "snps,designware-i2c";
> > > > + reg = <0xd0200000 0x1000>;
> > > > + interrupt-parent = <&vic0>;
> > > > + interrupts = <28>;
> > > > + };
> > > > +
> > > > + fsmc0: flash at d1800000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-fsmc-nand";
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + reg = <0xd1800000 0x1000 /* FSMC
Register */
> > > > + 0xd2000000 0x4000>; /* NAND Base
*/
> > > > + reg-names = "fsmc_regs", "nand_data";
> > > > + };
> > > > +
> > > > + smi0: flash at fc000000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-smi";
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + reg = <0xfc000000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <12>;
> > > > + };
> > > > +
> > > > + ehci at e1800000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-ehci", "usb-ehci";
> > > > + reg = <0xe1800000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <27>;
> > > > + };
> > > > +
> > > > + ehci at e2000000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-ehci", "usb-ehci";
> > > > + reg = <0xe2000000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <29>;
> > > > + };
> > > > +
> > > > + ohci at e1900000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-ohci", "usb-ohci";
> > > > + reg = <0xe1900000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <26>;
> > > > + };
> > > > +
> > > > + ohci at e2100000 {
> > > > + status = "disabled";
> > > > + compatible = "st,spear600-ohci", "usb-ohci";
> > > > + reg = <0xe2100000 0x1000>;
> > > > + interrupt-parent = <&vic1>;
> > > > + interrupts = <28>;
> > > > + };
> > >
> > > all of this need a Doc for the ST bindings
> >
> > Sure. I only provided those nodes on Arnd's special request. They are
> > currently disabled. And documentation will follow with the DT device
> > driver patches.
>
> no update it after
Hmmm. I'm sorry, but I fail to understand you here. Please explain.
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm/mach-spear6xx/Kconfig
> > > > b/arch/arm/mach-spear6xx/Kconfig index ff4ae5b..7777f72 100644
> > > > --- a/arch/arm/mach-spear6xx/Kconfig
> > > > +++ b/arch/arm/mach-spear6xx/Kconfig
> > > > @@ -11,6 +11,13 @@ config BOARD_SPEAR600_EVB
> > > >
> > > > help
> > > >
> > > > Supports ST SPEAr600 Evaluation Board
> > > >
> > > > +config BOARD_SPEAR600_DT
> > > > + bool "SPEAr600 generic board configured via device-tree"
> > > > + select MACH_SPEAR600
> > > > + select USE_OF
> > > > + help
> > > > + Supports ST SPEAr600 boards configured via the device-tree
> > > > +
> > > >
> > > > endmenu
> > > >
> > > > config MACH_SPEAR600
> > > >
> > > > diff --git a/arch/arm/mach-spear6xx/Makefile
> > > > b/arch/arm/mach-spear6xx/Makefile index cc1a4d8..6f87c3a 100644
> > > > --- a/arch/arm/mach-spear6xx/Makefile
> > > > +++ b/arch/arm/mach-spear6xx/Makefile
> > > > @@ -5,8 +5,5 @@
> > > >
> > > > # common files
> > > > obj-y += clock.o spear6xx.o
> > > >
> > > > -# spear600 specific files
> > > > -obj-$(CONFIG_MACH_SPEAR600) += spear600.o
> > > > -
> > > >
> > > > # spear600 boards files
> > > > obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
> > > >
> > > > diff --git a/arch/arm/mach-spear6xx/spear600.c
> > > > b/arch/arm/mach-spear6xx/spear600.c deleted file mode 100644
> > > > index d0e6eea..0000000
> > > > --- a/arch/arm/mach-spear6xx/spear600.c
> > > > +++ /dev/null
> > > > @@ -1,25 +0,0 @@
> > > > -/*
> > > > - * arch/arm/mach-spear6xx/spear600.c
> > > > - *
> > > > - * SPEAr600 machine source file
> > > > - *
> > > > - * Copyright (C) 2009 ST Microelectronics
> > > > - * Rajeev Kumar<rajeev-dlh.kumar at st.com>
> > > > - *
> > > > - * This file is licensed under the terms of the GNU General Public
> > > > - * License version 2. This program is licensed "as is" without any
> > > > - * warranty of any kind, whether express or implied.
> > > > - */
> > > > -
> > > > -#include <linux/ptrace.h>
> > > > -#include <asm/irq.h>
> > > > -#include <mach/generic.h>
> > > > -#include <mach/hardware.h>
> > > > -
> > > > -/* Add spear600 specific devices here */
> > > > -
> > > > -void __init spear600_init(void)
> > > > -{
> > > > - /* call spear6xx family common init function */
> > > > - spear6xx_init();
> > > > -}
> > > > diff --git a/arch/arm/mach-spear6xx/spear600_evb.c
> > > > b/arch/arm/mach-spear6xx/spear600_evb.c index c6e4254..c4949aa 100644
> > > > --- a/arch/arm/mach-spear6xx/spear600_evb.c
> > > > +++ b/arch/arm/mach-spear6xx/spear600_evb.c
> > > > @@ -32,9 +32,6 @@ static void __init spear600_evb_init(void)
> > > >
> > > > {
> > > >
> > > > unsigned int i;
> > > >
> > > > - /* call spear600 machine init function */
> > > > - spear600_init();
> > > > -
> > > >
> > > > /* Add Platform Devices */
> > > > platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
> > > >
> > > > diff --git a/arch/arm/mach-spear6xx/spear6xx.c
> > > > b/arch/arm/mach-spear6xx/spear6xx.c index e0f6628..aca20f0 100644
> > > > --- a/arch/arm/mach-spear6xx/spear6xx.c
> > > > +++ b/arch/arm/mach-spear6xx/spear6xx.c
> > > > @@ -6,6 +6,8 @@
> > > >
> > > > * Copyright (C) 2009 ST Microelectronics
> > > > * Rajeev Kumar<rajeev-dlh.kumar at st.com>
> > > > *
> > > >
> > > > + * Copyright 2012 Stefan Roese <sr at denx.de>
> > > > + *
> > > >
> > > > * This file is licensed under the terms of the GNU General Public
> > > > * License version 2. This program is licensed "as is" without any
> > > > * warranty of any kind, whether express or implied.
> > > >
> > > > @@ -15,6 +17,10 @@
> > > >
> > > > #include <linux/amba/pl061.h>
> > > > #include <linux/ptrace.h>
> > > > #include <linux/io.h>
> > > >
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_irq.h>
> > > > +#include <linux/of_platform.h>
> > > >
> > > > #include <asm/hardware/vic.h>
> > > > #include <asm/irq.h>
> > > > #include <asm/mach/arch.h>
> > > >
> > > > @@ -99,12 +105,6 @@ struct amba_device gpio_device[] = {
> > > >
> > > > }
> > > >
> > > > };
> > > >
> > > > -/* This will add devices, and do machine specific tasks */
> > > > -void __init spear6xx_init(void)
> > > > -{
> > > > - /* nothing to do for now */
> > > > -}
> > > > -
> > > >
> > > > /* This will initialize vic */
> > > > void __init spear6xx_init_irq(void)
> > > > {
> > > >
> > > > @@ -181,3 +181,60 @@ static void __init spear6xx_timer_init(void)
> > > >
> > > > struct sys_timer spear6xx_timer = {
> > > >
> > > > .init = spear6xx_timer_init,
> > > >
> > > > };
> > > >
> > > > +
> > > > +/*
> > > > + * Devicetree specific init structs/functions:
> > > > + * Once the SPEAr600 devicetree support has matured, we can remove
> > > > + * spear600_evb.c and the non-devicetree support above in this file.
> > > > + */
> > > > +
> > > > +/*
> > > > + * Add auxdata so that clock name matching doesn't fail in device
> > > > + * drivers
> > > > + */
> > > > +struct of_dev_auxdata spear600_auxdata_lookup[] __initdata = {
> > > > + OF_DEV_AUXDATA("arm,pl011", SPEAR6XX_ICM1_UART0_BASE,
> > > > + "uart0", NULL),
> > > > + OF_DEV_AUXDATA("arm,pl011", SPEAR6XX_ICM1_UART1_BASE,
> > > > + "uart1", NULL),
> > > > + OF_DEV_AUXDATA("arm,pl061", SPEAR6XX_CPU_GPIO_BASE,
> > > > + "gpio0", NULL),
> > > > + OF_DEV_AUXDATA("arm,pl061", SPEAR6XX_ICM3_GPIO_BASE,
> > > > + "gpio1", NULL),
> > > > + OF_DEV_AUXDATA("arm,pl061", SPEAR6XX_ICM2_GPIO_BASE,
> > > > + "gpio2", NULL),
> > > > + OF_DEV_AUXDATA("snps,designware-i2c", SPEAR6XX_ICM1_I2C_BASE,
> > > > + "i2c_designware.0", NULL),
> > >
> > > update the clkdev no more OF_DEV_AUXDATA
> >
> > That will break non-DT boards. We can change it in clkdev later, once DT
> > support has stabalized for SPEAr600. And remove all this then.
>
> it will not just add new entry
>
> as done on AT91 as example and requested for imx recently too
Again, I fail to understand you. Sorry. Please describe in a complete sentence
what exactly you mean.
Thanks,
Stefan
More information about the devicetree-discuss
mailing list