[PATCH 11/11] ARM: tegra: pcie: Add device tree support

Thierry Reding thierry.reding at avionic-design.de
Fri Mar 9 17:31:16 EST 2012


* Stephen Warren wrote:
> On 03/08/2012 07:51 AM, Thierry Reding wrote:
> > This commit adds support for instantiating the Tegra PCIe controller
> > from a device tree.
> > 
> > Signed-off-by: Thierry Reding <thierry.reding at avionic-design.de>
> 
> > diff --git a/Documentation/devicetree/bindings/pci/tegra-pcie.txt b/Documentation/devicetree/bindings/pci/tegra-pcie.txt
> 
> > +NVIDIA Tegra PCIe controller
> > +
> > +Required properties:
> > +- compatible: "nvidia,tegra20-pcie"
> > +- reg: physical base address and length of the controller's registers
> > +- interrupts: the interrupt outputs of the controller
> > +
> > +Optional properties:
> > +- pex-clk-supply: supply voltage for internal reference clock
> > +- vdd-supply: power supply for controller (1.05V)
> 
> Mark, Liam,
> 
> Should those *-supply properties really be optional? I got the
> impression talking to Mark in a different thread that all regulators
> should exist, although their implementation may be via a fixed
> regulator, with no GPIO, as determined by the board design.

If I read the TrimSlice code correctly, there is no regulator setup required
to make PCIe work there presumably because they hardwire the proper voltages.
On the other hand, maybe a better solution in this case would be to use the
dummy regulator in those cases.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120309/8b96a367/attachment.pgp>


More information about the devicetree-discuss mailing list