[PATCH 4/5 v2] ARM: kirkwood: convert rtc-mv to fdt.
Michael Walle
michael at walle.cc
Mon Mar 5 02:12:44 EST 2012
Am Freitag 02 März 2012, 18:50:21 schrieb Jason Cooper:
> The comment at mach-kirkwood/common.c:469, says this device is in every
> kirkwood board. So, it is placed in kirkwood.dtsi.
>
> Signed-off-by: Jason Cooper <jason at lakedaemon.net>
> ---
>
> Changes since v1:
>
> - removed unnecessary of_*() code from _probe()
> - use of_match_ptr()
>
> arch/arm/boot/dts/kirkwood.dtsi | 6 ++++++
> arch/arm/mach-kirkwood/board-dt.c | 1 -
> arch/arm/mach-kirkwood/common.c | 2 +-
> arch/arm/mach-kirkwood/common.h | 1 -
> drivers/rtc/rtc-mv.c | 7 +++++++
> 5 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi
> b/arch/arm/boot/dts/kirkwood.dtsi index 771c6bb..5fb185c 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -2,5 +2,11 @@
>
> / {
> compatible = "marvell,kirkwood";
> +
> + rtc at f1010300 {
> + compatible = "marvell,rtc";
> + reg = <0xf1010300 0x1f>;
> + interrupts = <53>;
> + };
> };
>
> diff --git a/arch/arm/mach-kirkwood/board-dt.c
> b/arch/arm/mach-kirkwood/board-dt.c index 2a45656..6e18338 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -134,7 +134,6 @@ static void __init kirkwood_dt_init(void)
> #endif
>
> /* internal devices that every board has */
> - kirkwood_rtc_init();
> kirkwood_wdt_init();
> kirkwood_xor0_init();
> kirkwood_xor1_init();
> diff --git a/arch/arm/mach-kirkwood/common.c
> b/arch/arm/mach-kirkwood/common.c index 167b6c8..0c0375f 100644
> --- a/arch/arm/mach-kirkwood/common.c
> +++ b/arch/arm/mach-kirkwood/common.c
> @@ -163,7 +163,7 @@ void __init kirkwood_nand_init_rnb(struct mtd_partition
> *parts, int nr_parts,
> /*************************************************************************
> **** * SoC RTC
>
> **************************************************************************
> **/ -void __init kirkwood_rtc_init(void)
> +static void __init kirkwood_rtc_init(void)
> {
> orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
> }
> diff --git a/arch/arm/mach-kirkwood/common.h
> b/arch/arm/mach-kirkwood/common.h index c382447..ca08826 100644
> --- a/arch/arm/mach-kirkwood/common.h
> +++ b/arch/arm/mach-kirkwood/common.h
> @@ -53,7 +53,6 @@ void kirkwood_restart(char, const char *);
>
> char *kirkwood_id(void);
> void kirkwood_l2_init(void);
> -void kirkwood_rtc_init(void);
> void kirkwood_wdt_init(void);
> void kirkwood_xor0_init(void);
> void kirkwood_xor1_init(void);
> diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
> index 768e2ed..3108b18 100644
> --- a/drivers/rtc/rtc-mv.c
> +++ b/drivers/rtc/rtc-mv.c
> @@ -12,6 +12,7 @@
> #include <linux/bcd.h>
> #include <linux/io.h>
> #include <linux/platform_device.h>
> +#include <linux/of.h>
> #include <linux/delay.h>
> #include <linux/gfp.h>
> #include <linux/module.h>
> @@ -294,11 +295,17 @@ static int __exit mv_rtc_remove(struct
> platform_device *pdev) return 0;
> }
>
> +static struct of_device_id rtc_mv_of_match_table[] = {
> + { .compatible = "marvell,rtc", },
> + {}
> +};
> +
Isn't here an ifdef CONFIG_OF missing to prevent compiler warnings?
> static struct platform_driver mv_rtc_driver = {
> .remove = __exit_p(mv_rtc_remove),
> .driver = {
> .name = "rtc-mv",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(rtc_mv_of_match_table),
> },
> };
--
Michael
More information about the devicetree-discuss
mailing list