[PATCH 1/5 v2] ARM: kirkwood: covert orion-spi to fdt.
Jason Cooper
jason at lakedaemon.net
Sat Mar 3 04:50:18 EST 2012
On the Globalscale Dreamplug (Marvell Kirkwood Development Platform),
2MB of NOR flash are used to hold the bootloader, bootloader
environment, and devicetree blob. It is connected via spi.
Signed-off-by: Jason Cooper <jason at lakedaemon.net>
---
Changes from v1:
- used of_match_ptr() as suggested by Grant Likely
arch/arm/boot/dts/kirkwood-dreamplug.dts | 34 +++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-dt.c | 40 ------------------------------
arch/arm/mach-kirkwood/common.c | 11 ++++++++
drivers/spi/spi-orion.c | 37 ++++++++++++++++++++++++---
4 files changed, 78 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 8a5dff8..bdf2ddc 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -22,4 +22,38 @@
interrupts = <33>;
clock-frequency = <200000000>;
};
+
+ spi at f1010600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "marvell,orion-spi";
+ reg = <0xf1010600 0x1ff>;
+ clock-frequency = <200000000>;
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "macronix,mx25l1606e", "jedec-flash";
+
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition at 100000 {
+ label = "U-Boot Environment";
+ reg = <0x100000 0x080000>;
+ };
+
+ partition at 180000 {
+ label = "Flattened Device Tree";
+ reg = <0x180000 0x080000>;
+ };
+ };
+ };
};
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index fbe6405..4960e63 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -39,42 +39,6 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ }
};
-struct mtd_partition dreamplug_partitions[] = {
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- },
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K,
- },
- {
- .name = "dtb",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K + SZ_512K,
- },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
- .type = "mx25l1606e",
- .name = "spi_flash",
- .parts = dreamplug_partitions,
- .nr_parts = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &dreamplug_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
@@ -140,10 +104,6 @@ static void __init dreamplug_init(void)
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
- spi_register_board_info(dreamplug_spi_slave_info,
- ARRAY_SIZE(dreamplug_spi_slave_info));
- kirkwood_spi_init();
-
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index cc15426..357fcde 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,6 +15,7 @@
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/dma-mapping.h>
+#include <linux/of.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/timex.h>
@@ -481,6 +482,9 @@ static int __init kirkwood_clock_gate(void)
{
unsigned int curr = readl(CLOCK_GATING_CTRL);
u32 dev, rev;
+#ifdef CONFIG_OF
+ struct device_node *dp;
+#endif
kirkwood_pcie_id(&dev, &rev);
printk(KERN_DEBUG "Gating clock of unused units\n");
@@ -524,6 +528,13 @@ static int __init kirkwood_clock_gate(void)
} else /* keep this bit set for devices that don't have PCIe1 */
kirkwood_clk_ctrl |= CGC_PEX1;
+#ifdef CONFIG_OF
+ dp = of_find_node_by_path("/");
+ if (dp && of_device_is_available(of_find_compatible_node(dp, NULL,
+ "marvell,orion-spi")))
+ kirkwood_clk_ctrl |= CGC_RUNIT;
+#endif
+
/* Now gate clock the required units */
writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 13448c8..acfb240 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -18,6 +18,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <asm/unaligned.h>
#define DRIVER_NAME "orion_spi"
@@ -45,6 +46,8 @@ struct orion_spi {
void __iomem *base;
unsigned int max_speed;
unsigned int min_speed;
+ unsigned int tclk;
+ unsigned int clock_fix;
struct orion_spi_info *spi_info;
};
@@ -104,7 +107,7 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
orion_spi = spi_master_get_devdata(spi->master);
- tclk_hz = orion_spi->spi_info->tclk;
+ tclk_hz = orion_spi->tclk;
/*
* the supported rates are: 4,6,8...30
@@ -360,7 +363,7 @@ static int orion_spi_setup(struct spi_device *spi)
orion_spi = spi_master_get_devdata(spi->master);
/* Fix ac timing if required. */
- if (orion_spi->spi_info->enable_clock_fix)
+ if (orion_spi->clock_fix)
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
(1 << 14));
@@ -474,6 +477,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
master->setup = orion_spi_setup;
master->transfer = orion_spi_transfer;
master->num_chipselect = ORION_NUM_CHIPSELECTS;
+ master->dev.of_node = pdev->dev.of_node;
dev_set_drvdata(&pdev->dev, master);
@@ -481,8 +485,26 @@ static int __init orion_spi_probe(struct platform_device *pdev)
spi->master = master;
spi->spi_info = spi_info;
- spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
- spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+ if (spi_info)
+ spi->tclk = spi_info->tclk;
+
+ of_property_read_u32(master->dev.of_node,
+ "clock-frequency", &spi->tclk);
+
+ if (!spi->tclk) {
+ dev_err(&pdev->dev, "cannot set clock rate\n");
+ status = -EINVAL;
+ goto out;
+ }
+
+ spi->max_speed = DIV_ROUND_UP(spi->tclk, 4);
+ spi->min_speed = DIV_ROUND_UP(spi->tclk, 30);
+
+ if (spi_info)
+ spi->clock_fix = spi_info->enable_clock_fix;
+
+ if (of_find_property(master->dev.of_node, "spi-clock-fix", NULL))
+ spi->clock_fix = 1;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
@@ -541,10 +563,17 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
MODULE_ALIAS("platform:" DRIVER_NAME);
+static struct of_device_id spi_orion_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,orion-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spi_orion_of_match_table);
+
static struct platform_driver orion_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spi_orion_of_match_table),
},
.remove = __exit_p(orion_spi_remove),
};
--
1.7.3.4
More information about the devicetree-discuss
mailing list