[PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc
Marc Kleine-Budde
mkl at pengutronix.de
Fri Jun 29 21:08:17 EST 2012
On 06/25/2012 06:37 AM, Shawn Guo wrote:
> On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
>> Add simple binding for the stmp3xxx-rtc.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Alessandro Zummo <a.zummo at towertech.it>
>
> Hi Alessandro,
>
> The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
> need the patch to convert some board files over to device tree. May I
> have your ack to queue the patch on my tree?
The interrupt numbers are not as the driver expects them..
>
> Regards,
> Shawn
>
>> Cc: devicetree-discuss at lists.ozlabs.org
>> Cc: Grant Likely <grant.likely at secretlab.ca>
>> Cc: Rob Herring <rob.herring at calxeda.com>
>> Cc: rtc-linux at googlegroups.com
>> Cc: Shawn Guo <shawn.guo at linaro.org>
>> ---
>> .../devicetree/bindings/rtc/stmp3xxx-rtc.txt | 19 +++++++++++++++++++
>> arch/arm/boot/dts/imx28.dtsi | 1 +
>> drivers/rtc/rtc-stmp3xxx.c | 7 +++++++
>> 3 files changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>>
>> V2: Fix typos, remove fsl,imx28-rtc
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> new file mode 100644
>> index 0000000..a7a7de5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> @@ -0,0 +1,19 @@
>> +* STMP3xxx/i.MX28 Time Clock controller
>> +
>> +Required properties:
>> +- compatible: should be one of the following.
>> + * "fsl,stmp3xxx-rtc"
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +- interrupts: Two interrupt numbers to the cpu should be specified. First
>> + interrupt number is the rtc tick interrupt and second interrupt number
>> + is the rtc alarm interrupt. The number of cells representing a interrupt
>> + depends on the parent interrupt controller.
The driver expects the first interrupt to the the alarm interrupt, the
event interrupt is not use, yet.
>> +
>> +Example:
>> +
>> + rtc at 80056000 {
>> + compatible = "fsl,stmp3xxx-rtc";
>> + reg = <0x80056000 2000>;
>> + interrupts = <28 29>;
>> + };
>> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
>> index cabcce8..5053019 100644
>> --- a/arch/arm/boot/dts/imx28.dtsi
>> +++ b/arch/arm/boot/dts/imx28.dtsi
>> @@ -387,6 +387,7 @@
>> };
>>
>> rtc at 80056000 {
>> + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
>> reg = <0x80056000 2000>;
>> interrupts = <28 29>;
should be:
<29 28>
>> status = "disabled";
>> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
>> index 1028786..3aadb58 100644
>> --- a/drivers/rtc/rtc-stmp3xxx.c
>> +++ b/drivers/rtc/rtc-stmp3xxx.c
>> @@ -25,6 +25,7 @@
>> #include <linux/interrupt.h>
>> #include <linux/rtc.h>
>> #include <linux/slab.h>
>> +#include <linux/of_device.h>
>>
>> #include <mach/common.h>
>>
>> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
>> #define stmp3xxx_rtc_resume NULL
>> #endif
>>
>> +static const struct of_device_id rtc_dt_ids[] = {
>> + { .compatible = "fsl,stmp3xxx-rtc", },
>> + { /* sentinel */ }
>> +};
>> +
>> static struct platform_driver stmp3xxx_rtcdrv = {
>> .probe = stmp3xxx_rtc_probe,
>> .remove = stmp3xxx_rtc_remove,
>> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
>> .driver = {
>> .name = "stmp3xxx-rtc",
>> .owner = THIS_MODULE,
>> + .of_match_table = rtc_dt_ids,
>> },
>> };
>>
>> --
>> 1.7.10
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120629/1e8f68eb/attachment.sig>
More information about the devicetree-discuss
mailing list