[PATCH 1/1] of: reform prom_update_property function
Dong Aisheng
aisheng.dong at freescale.com
Thu Jun 21 19:37:03 EST 2012
On Thu, Jun 21, 2012 at 08:16:36AM +0800, Benjamin Herrenschmidt wrote:
> On Wed, 2012-06-20 at 08:07 -0500, Rob Herring wrote:
> > On 06/20/2012 12:54 AM, Dong Aisheng wrote:
> > > From: Dong Aisheng <dong.aisheng at linaro.org>
> > >
> > > prom_update_property() currently fails if the property doesn't
> > > actually exist yet which isn't what we want. Change to add-or-update
> > > instead of update-only, then we can remove a lot duplicated lines.
> > >
> > > Suggested-by: Grant Likely <grant.likely at secretlab.ca>
> > > Signed-off-by: Dong Aisheng <dong.aisheng at linaro.org>
> > > ---
> >
> > Looks fine, but you need to cc powerpc maintainers.
>
> Generally fine, just one issue I spotted:
>
Thanks for the review.
> > > diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
> > > index 7b3bf76..4c92f1c 100644
> > > --- a/arch/powerpc/platforms/pseries/reconfig.c
> > > +++ b/arch/powerpc/platforms/pseries/reconfig.c
> > > @@ -432,7 +432,7 @@ static int do_update_property(char *buf, size_t bufsize)
> > > unsigned char *value;
> > > char *name, *end, *next_prop;
> > > int rc, length;
> > > - struct property *newprop, *oldprop;
> > > + struct property *newprop;
> > > buf = parse_node(buf, bufsize, &np);
> > > end = buf + bufsize;
> > >
> > > @@ -450,18 +450,11 @@ static int do_update_property(char *buf, size_t bufsize)
> > > if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
> > > slb_set_size(*(int *)value);
> > >
> > > - oldprop = of_find_property(np, name,NULL);
> > > - if (!oldprop) {
> > > - if (strlen(name))
> > > - return prom_add_property(np, newprop);
> > > - return -ENODEV;
> > > - }
> > > -
>
> Here the code would exit the function with an error if the property
> didn't already exist, you are losing that semantic.
>
You're correct.
> Additionally there's that oddball test for strlen(name) ... you might
> want to check that somewhere... and the strange fact that it would
> actually add the new property anyway despite returning an error which is
> very very odd semantics but I'd rather not break them since this is
> exposed to userspace, so we may have tools relying on them.
>
Right, i also feel it's strange.
I do not know that code history, what i can do may be try to keep
the code follow the same as before.
Maybe we could change it as as follows.
It looks then the code follow is the same as before.
Do you think if it's ok?
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7b3bf76..4c237f4 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -443,6 +443,9 @@ static int do_update_property(char *buf, size_t bufsize)
if (!next_prop)
return -EINVAL;
+ if (!strlen(name)
+ return -ENODEV;
+
newprop = new_property(name, length, value, NULL);
if (!newprop)
return -ENOMEM;
@@ -450,13 +453,6 @@ static int do_update_property(char *buf, size_t bufsize)
if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
slb_set_size(*(int *)value);
- oldprop = of_find_property(np, name,NULL);
- if (!oldprop) {
- if (strlen(name))
- return prom_add_property(np, newprop);
- return -ENODEV;
- }
-
> > > upd_value.node = np;
> > > upd_value.property = newprop;
> > > pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value);
> > >
> > > - rc = prom_update_property(np, newprop, oldprop);
> > > + rc = prom_update_property(np, newprop);
> > > if (rc)
> > > return rc;
> > >
> > > @@ -486,7 +479,7 @@ static int do_update_property(char *buf, size_t bufsize)
> > >
> > > rc = pSeries_reconfig_notify(action, value);
> > > if (rc) {
> > > - prom_update_property(np, oldprop, newprop);
> > > + prom_update_property(np, newprop);
> > > return rc;
> > > }
> > > }
> > > diff --git a/drivers/of/base.c b/drivers/of/base.c
> > > index d9bfd49..a14f109 100644
> > > --- a/drivers/of/base.c
> > > +++ b/drivers/of/base.c
> > > @@ -1051,7 +1051,8 @@ int prom_remove_property(struct device_node *np, struct property *prop)
> > > }
> > >
> > > /*
> > > - * prom_update_property - Update a property in a node.
> > > + * prom_update_property - Update a property in a node, if the property does
> > > + * not exist, add it.
> > > *
> > > * Note that we don't actually remove it, since we have given out
> > > * who-knows-how-many pointers to the data using get-property.
> > > @@ -1059,13 +1060,19 @@ int prom_remove_property(struct device_node *np, struct property *prop)
> > > * and add the new property to the property list
> > > */
> > > int prom_update_property(struct device_node *np,
> > > - struct property *newprop,
> > > - struct property *oldprop)
> > > + struct property *newprop)
> > > {
> > > - struct property **next;
> > > + struct property **next, *oldprop;
> > > unsigned long flags;
> > > int found = 0;
> > >
> > > + if (!newprop->name)
> > > + return -EINVAL;
> > > +
> > > + oldprop = of_find_property(np, newprop->name, NULL);
> > > + if (!oldprop)
> > > + return prom_add_property(np, newprop);
> > > +
> > > write_lock_irqsave(&devtree_lock, flags);
> > > next = &np->properties;
> > > while (*next) {
> > > diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
> > > index 927cbd1..df7dd08 100644
> > > --- a/fs/proc/proc_devtree.c
> > > +++ b/fs/proc/proc_devtree.c
> > > @@ -101,6 +101,11 @@ void proc_device_tree_update_prop(struct proc_dir_entry *pde,
> > > {
> > > struct proc_dir_entry *ent;
> > >
> > > + if (!oldprop) {
> > > + proc_device_tree_add_prop(pde, newprop);
> > > + return;
> > > + }
> > > +
> > > for (ent = pde->subdir; ent != NULL; ent = ent->next)
> > > if (ent->data == oldprop)
> > > break;
> > > diff --git a/include/linux/of.h b/include/linux/of.h
> > > index 2ec1083..b27c871 100644
> > > --- a/include/linux/of.h
> > > +++ b/include/linux/of.h
> > > @@ -260,8 +260,7 @@ extern int of_machine_is_compatible(const char *compat);
> > > extern int prom_add_property(struct device_node* np, struct property* prop);
> > > extern int prom_remove_property(struct device_node *np, struct property *prop);
> > > extern int prom_update_property(struct device_node *np,
> > > - struct property *newprop,
> > > - struct property *oldprop);
> > > + struct property *newprop);
> > >
> > > #if defined(CONFIG_OF_DYNAMIC)
> > > /* For updating the device tree at runtime */
>
> Note that another issue you aren't addressing is that this is a
> fundamentally leaky operation.
>
> IE. The allocation of the "old" property isn't disposed of. It can't
> because today we don't know whether any of those pointers was
> dynamically allocated or not. IE they could point to the fdt
Hmm, i did not see static allocated property before.
Where can we see an exist case?
If we really have this issue, it seems of_node_release also has the same issue,
since it frees the property without distinguish whether the property is allocated
dynamically.
> string list, data block, or could be bootmem ... or could be
> actual kernel memory.
>
> We might want to extend the struct property to contain indications of
> the allocation type so we can kfree dynamic properties properly.
>
I wonder the simplest way may be not allow static allocated property, like dt
node does i guess.
> But then there's the question of the lifetime of a property... since
> they aren't reference counted like nodes are.
>
Yes, that's a real exist problem.
Anyway, i guess we could do that work of this problem in another patch
rather than have to in this patch series.
Regards
Dong Aisheng
More information about the devicetree-discuss
mailing list