[Patch v5 08/13] ARM: imx6q: add config-on-boot gpios

[Fabio Estevam]

On Wed, Jun 13, 2012 at 9:34 AM, Richard Zhao
<richard.zhao at freescale.com> wrote:

> +static void __init imx6q_config_on_boot(void)
> +{
> +       struct device_node *np;
> +       struct property *pp;
> +       int cnt, len, i;
> +       int gpio;
> +
> +       np = of_find_node_by_path("/config-on-boot");
> +       if (!np)
> +               return;
> +       cnt = of_gpio_named_count(np, "output-gpios");
> +       pp = of_find_property(np, "output-gpio-values", &len);
> +       if (!pp || cnt != len / sizeof(u32)) {
> +               pr_err("Invalid config-on-boot gpios!\n");
> +               of_node_put(np);
> +               return;
> +       }
> +       for (i = 0; i < cnt; i++) {
> +               gpio = of_get_named_gpio(np, "output-gpios", i);
> +               if (gpio_is_valid(gpio))
> +                       gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH,
> +                                       "config-on-boot");
> +       }
> +
> +       of_node_put(np);
> +}

Couldn't this function be made generic and put outside of mach-imx6q.c
so that other platforms could use it?

I need the same for mxs.