[PATCH v3 00/12] add imx usb driver for mx28/6x

[Felipe Balbi]

Hi,

On Fri, May 25, 2012 at 10:24:13AM +0800, Richard Zhao wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
> 
> Status:
>   - this version only support host
>   - usbotg controler works at host role
> 
> Changes since V2:
>   - Rebase to Alex's tree
>   - Use regulator to control vbus power
>   - Remove ARCH check in Kconfig, but add OF_DEV check.
>   - Other changes according laster version comments.
> 
> Richard Zhao (12):
>   usb: otg: add notify_connect/notify_disconnect callback
>   usb: chipidea: permit driver bindings pass phy pointer
>   usb: ehci-hcd: notify phy when connect change
>   usb: otg: add basic mxs phy driver support
>   usb: chipidea: add imx platform driver
>   ARM: imx6q: correct device name of usbphy and usb controller clock
>     export
>   ARM: imx6q: add config-on-boot gpios
>   ARM: imx6q: add usbphy clocks
>   ARM: imx6q: disable usb charger detector
>   ARM: dts: imx6q-sabrelite: add usb devices
>   ARM: mxs: clk_register_clkdev mx28 usb clocks
>   ARM: dts: imx28-evk: add usb devices

how are we going to handle these series ? drivers/usb/otg/* parts are
mostly ok (I need to look deeper) but if I take drivers/usb/otg/* we
will have to delay drivers/usb/chipidea I guess...

So someone would have to take the whole series ? Who will be that
person? Alex, will it be you ?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120605/044017be/attachment-0001.sig>