[PATCH v2 0/2] Add DT support to C_CAN/D_CAN controller

[AnilKumar Ch]

This patch series adds the device tree support to C_CAN/D_CAN
controller with pinmux configuration and device tree data
addition to corresponding dts and dtsi files.

Also adds Runtime PM support to C_CAN/D_CAN controller.

These patches have been tested on AM335x EVM using some additional
patches to add device tree data to EVM dts files and to initialize
D_CAN RAM. D_CAN raminit is controlled from control module register.
This patch will be submitted once control module MFD driver support
is added to mainline.

Due to lack of hardware I am not able to test c_can functionality.
I appreciate if anyone can test c_can functionality with this patch
series.

First and last patches applies on top of linux-next tree, 2nd and
3rd patches applies on linux-omap tree.

Changes from v1:
	- Separated 4 patches into CAN driver specific and device
	  tree data addition specific.
	- Incorporated Marc's comments on v1
	  * Modified c_can_dev_id enum to handle both devtype and
	    platform device id index.
	  * Removed "legacy bosch,c_can_platform" from DT bindings

AnilKumar Ch (2):
  can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
  can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller

 .../devicetree/bindings/net/can/c_can.txt          |   37 +++++++++++
 drivers/net/can/c_can/c_can.h                      |    5 +-
 drivers/net/can/c_can/c_can_platform.c             |   65 +++++++++++++++-----
 3 files changed, 88 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt

-- 
1.7.9.5