[PATCH RESEND v2 2/2] ARM: EXYNOS: Add gscaler device from DT

[Sylwester Nawrocki]

Hi Shaik,

On 07/16/2012 07:33 AM, Shaik Ameer Basha wrote:
> +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
> @@ -0,0 +1,16 @@
> +* Samsung Exynos5 Gscaler device
> +
> +Gscaler is used for scaling and color space conversion on EXYNOS5 SoCs.
> +
> +Required properties:
> +- compatible: should be "samsung,exynos-gsc"

Shouldn't there rather be a specific "compatible" property for each SoC,
e.g.
    - compatible: should be one of:
	"samsung5250,exynos-gsc",
	"samsung5450,exynos-gsc",
etc. ?

> +- reg: should contian Gsaler physical address location and length.

contian -> contain, Gsaler -> Gscaler

> +- interrupts: should contain Gscaler interrupt number
> +
> +Example:
> +
> +gsc_0:  gsc at 0x13e00000 {
> +	compatible = "samsung,exynos-gsc";

	compatible = "samsung5250,exynos-gsc";

> +	reg =<0x13e00000 0x1000>;
> +	interrupts =<0 85 0>;
> +};

The aliases are still undocumented. How about adding something
along the lines of:

"Each Gscaler node should have a numbered alias in the aliases node,
in the form of gscN, N = 0...3."

?

> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 4272b29..b945c00 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -23,6 +23,13 @@
>   	compatible = "samsung,exynos5250";
>   	interrupt-parent =<&gic>;
>
> +	aliases {
> +		gsc0 =&gsc_0;
> +		gsc1 =&gsc_1;
> +		gsc2 =&gsc_2;
> +		gsc3 =&gsc_3;
> +	};
> +
>   	gic:interrupt-controller at 10481000 {
>   		compatible = "arm,cortex-a9-gic";
>   		#interrupt-cells =<3>;

--

Regards,
Sylwester