[PATCH] ARM: davinci: cp_intc: Add OF support for TI interrupt controller

[Sekhar Nori]

Hi Rob,

On 7/6/2012 10:23 PM, Sekhar Nori wrote:
> Hi Grant,
> 
> On 7/5/2012 6:13 PM, Heiko Schocher wrote:
>> Hello Sekhar,
>>
>> On 03.07.2012 21:16, Sekhar Nori wrote:
>>> From: Heiko Schocher<hs at denx.de>
>>>
>>> Add a function to initialize the Common Platform Interrupt Controller
>>> (cp_intc) from TI used on OMAP-L1x SoCs using a device tree node.
>>>
>>> Signed-off-by: Heiko Schocher<hs at denx.de>
>>> Cc: davinci-linux-open-source at linux.davincidsp.com
>>> Cc: linux-arm-kernel at lists.infradead.org
>>> Cc: devicetree-discuss at lists.ozlabs.org
>>> Cc: Grant Likely<grant.likely at secretlab.ca>
>>> Cc: Sekhar Nori<nsekhar at ti.com>
>>> Cc: Wolfgang Denk<wd at denx.de>
>>> Cc: Sergei Shtylyov<sshtylyov at mvista.com>
>>> Signed-off-by: Sekhar Nori<nsekhar at ti.com>
>>> ---
>>>   .../devicetree/bindings/arm/davinci/cp-intc.txt    |   27
>>> ++++++++++++++++++++
>>>   arch/arm/mach-davinci/cp_intc.c                    |   16 +++++++++---
>>>   arch/arm/mach-davinci/include/mach/cp_intc.h       |    1 +
>>>   3 files changed, 41 insertions(+), 3 deletions(-)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/arm/davinci/cp-intc.txt
>>
>> Thanks!
>>
>> Tested on the enbw_cmc board.
> 
> Any further feedback on this? If you are OK, I would like to queue this
> for v3.6 through DaVinci tree.

Do you have any feedback on this patch? Looks like Grant is going to be
busy for a while. If you do not have the original patch I can forward it
to you.

Thanks,
Sekhar